Printers HP PageWide: infrequent use of printer HP PageWide can cause a problem on inkjet printer

On the new printer HP PageWide, if I don't have that infrequent use, ink clog or dry as it does on inkjet?

Advertisement

Plugged in and turned on, will be fine.

Unplugged or turned off, 3 months is the longest we would like to see it go.

Tags: HP Printers

Similar Questions

  • Infrequent use of printer

    I have a photosmart B110 installed in a cottage. Sometimes ago 3-4 weeks between the cottage is used. I should mention that when absent, we keep constant temperature of 10 ° C. When we go back and use the B110, often by a cleaning of the nozzles on both levels. We also face too fast consumption of ink. What is the best way to store the cartridges when we are absent? Hot, cold, dry air?

    Hello Huulgaard,

    I understand that you are interested in best practices for the storage of your HP ink cartridges. To answer your question, it is recommended to keep the ink cartridges, sealed in its original packaging until they are installed. Store at temperatures between-15 and 35 degrees Celsius (5 to 95 degrees Fahrenheit).

    Please take a look at storage open cartridges and print heads, even though HP recommends that all cartridges are still sealed in the original packaging until they are installed, this will help you make the most of your cartridges when they are open and do not use it.

    I hope this has been helpful, please let me know if you need more help.

    Thank you

  • using listener of selection for table cause some problems

    Hello

    I'm using jdev 11.1.1.4.0

    My use case:
    I have the master/detail table
    When the user changes data in the secondary table then it click directly to anather record in the main table
    I need to display alert message ("you must save changes first") and prevent the movement, so I do the following:
    in the main table, I used bean manged in SelectionListener attribute called onTableSelect(SelectionEvent selectionEvent) like this:
    If (ADFUtils.getApplicationModuleForDataControl("CodesModuleDataControl").getTransaction () .isDirty ()) {}
    FacesContext context = FacesContext.getCurrentInstance ();
    context.addMessage (null, new FacesMessage (FacesMessage.SEVERITY_WARN, getValueFromResourceBundle("hr.view.vcBundle","global.msgUnsavedChanges"), null));

    * / / HERE, I need to move the selection to the previous record *.
    }
    else {}
    Table richeTableau = (RichTable) selectionEvent.getSource ();
    CollectionModel tableModel = (CollectionModel) table.getValue ();
    JUCtrlHierBinding adfTableBinding = tableModel.getWrappedData ((JUCtrlHierBinding));
    DCIteratorBinding tableIteratorBinding = adfTableBinding.getDCIteratorBinding ();
    Object selectedRowData = table.getSelectedRowData ();
    JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding) selectedRowData;
    Key rwKey = nodeBinding.getRowKey ();
    tableIteratorBinding.setCurrentRowWithKey (rwKey.toStringFormat (true));
    }

    the code is working properly but in the main table, the culmination of save becomes different from the table itterator,
    My question is how can I move point highest record in the table according to it itterator.

    Best regards

    In the selectionListener, you can get the previously selected like this lines:

        public void onSelectionListener(SelectionEvent selectionEvent) {
            Key removedKey = null;
            List removedkeys = null;
            RowKeySet removed = selectionEvent.getRemovedSet();
            for (Object l: removed) {
                removedkeys = (List)l;
                for (Object k: removedkeys) {
                    removedKey = (Key)k;
                    logger.finer("previously selected row key: " + removedKey.getAttribute(0));
                }
            }
    

    If you want to select the line above again, you can do something like the following:

            DCIteratorBinding someiteratorIT = ADFUtils.findIterator("SomeIterator");
            someiteratorIT .setCurrentRowWithKeyValue((String)removedKey.getAttribute(0));
            getT4().setSelectedRowKeys(removed);
            AdfFacesContext.getCurrentInstance().addPartialTarget(getT4());
        }
    

    where getT4() is the richeTableau.

    Published by: John on March 19, 2012 13:55

  • I have a jrl system plotter/printer and driver for windows 98, but my new windows xp will not see the tracer. I used add printer/fax to install, but when the final 'Finish', he could not install. Help, please

    I have an old windows 98 are dedicated to this plotter and it work fine until we have upgraded to the new machine with windows xp.

    Hello Dzuco,

    Thank you for your message.  You will need get a driver xp for printer/plotter.  Pilots are produced by the manufacturer and are usually downloaded from their Web site, however, I can't seem to find anything online to JRL Systems.  I recommend you contact JRL systems for the suitable driver for your printer.  You also have the option to search the Web for 'plotter jrl systems printer driver.  Don't forget that some 3rd party software can contain viruses and malware, so take precautions by downloading and installing the 3rd party software.
    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Missing startup programs, printers uninstalled and run used print spooler

    Hi guys,.

    The title really says it all.   I am running XP.
    I tried to use my scanner but it will not work properly.
    I tried to use my printer laser hp 8000 and Canon S800 deskjet.   They are more installed and when I try to install I get an error that says that the print spooler is not running.
    All programs are missing in commissioning.   If I click on programs, then I can find them.
    Any ideas?   I ran, but I'm not all that good in the first place.
    TIA
    Greg

    "Missing programs" indicate likely malware infestation.  What do you use for an antivirus application and is his current subscription?  Have you let the subscription expires?

    Start with the download, install, update and run an analysis complete with each of these tools free amtimalware.  Do not run the scans at the same time.  Each is likely to take some time, so have something else to do.

    MalwareBytes Anti-Malware
    SUPERAntiSpyware

    Now for the symptoms.

    Hidden entries in the start menu > all programs

    Beginning > menu all programs is a combination of two folders (directories) on your hard drive:

    C:\Documents and Settings\All Users Menu
    C:\Documents and Settings\\Start Menu

    If the subdirectories in one or both of the above is given to the "hidden" attribute, you will not see the corresponding entry when you click Start > all programs.  To check and fix this, right-click on the Start button and select "Open" or "Open All Users" (you should do as well until you're through).  In the window of Windows Explorer that opens, click Tools > Folder Options > view.  Click on the button "Show the hidden files and folders" and uncheck "Hide protected operating system files (recommended)."  OK your way out.

    Double-click the programs folder.  Any folder that is hidden will appear "disappear".  Right click on each hidden folder, and then select Properties.  At the bottom of the general tab, uncheck the 'hidden '.  Click OK.  Select "apply changes to this folder, subfolders and files. Click OK.  Do this for all the hidden folders.  When you are finished, go back to tools > Folder Options > view and the changes that you have made previously.

    Repeat the above by right clicking on start and select open or open all users, no matter what you is not done everything first.

    Print spooler does not and empty the folder printers and faxes

    A. Clean on print jobs pending

    • Open a command prompt window (start > run > cmd > OK)
    • Type the following in the black command prompt window, and then press ENTER after each line (don't forget the quotes)

    net stop spooler
    del/q '% windir%\system32\spool\PRINTERS\*.* '.
    net start spooler
    output

    B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on this site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  • You can use windows print drivers on Vista 7 for printers

    Original title: print Vista and Windows 7 drivers

    You can use windows print drivers on Vista 7 for printers that do not have support for Vista?

    Hello

    It would be useful that you started with the make and model of printer.

    Usually it's the other way around - use drivers Windows Vista on Windows 7 unit.  Windows is supported in this regard.

    Have you already installed the printer on Windows Vista?

  • Printers network returns to 'Use printer offline' system recovery (extended). Windows 7 SP1 all versions

    Printers network returns to 'Use printer offline' system recovery (extended). The questions appear to affect all versions of Windows 7 (32 and 64 bit).

    Printed documents are queued on the local PC, waiting for the printer to come online.
    The box can be seen by selecting devices and printers from the Start button. Double-click the printer service (usually the default printer) to open the printer window. Click on the "Printer" menu item in the window of the printer. The 'use printer offline' will be checked.

    It requires a privilege to administer to uncheck the 'use printer offline '. The printer begins to print queue elements. The option "Use Offline printer" will remain off until the PC then wakes up from his sleep.
    Printer has a static IP address and the last HP printer driver. is connected by WiFi to router. PC is connected to the router or use the WiFi. The question of the effects only PC under Windows 7. It seems to be very similar to that discussed in the article KB 934455 Vista.
    Does anyone know of a solution for the PC under Windows 7?

    Hello

    I suggest you to follow the steps below and check if it helps.

    Method 1:

    Try running the fixit tool from the link below and check.

    Problems printing and printing errors:

    http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

    Method 2: To select a default printer

    a. open devices and printers , click the Start button.

    b. right-click on the printer you want to use, and then click set as default printer. (You will see a check box on the printer icon, which means that it is now your default printer.)

    For more information, visit the following link:

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

    You can check out the following link and try the suggestions provided by Robyn-technician support and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/printer-stops-working-shows-offline-at-random/0e88380e-4e7c-41c0-bcc8-6bf8afa32e7a

    Hope this information is useful.

  • You can print with a 6s iPhone using a printer no Wifi

    How do you print with a 6s iPhone using the printer no WiFi?

    Hey,.

    I always got WiFi printers in my house and never had to deal with this problem personally, but the following CNET article seems to answer this question:

    http://www.CNET.com/how-to/how-to-print-wirelessly-from-your-iPhone-iPad-or-iPod - touch.

    My printer is a HP OfficeJet 7500 E910, which allows me to print from any wireless device and my printer is plugged only the power source.

    Also, I did not read the entire article carefully, but I would venture to say that if you have a cable to connect your printer to your wireless router, it should appear as a network printer. If your iPhone is connected to the same wireless network as the router is mounted, you should have this success. It would still be printing wireless from your iPhone, but just a different configuration.

    Hope this helps, and feel free to respond with thoughts or questions!

    Thank you

    Michael

  • All printers disappear from windows 2012 r2 print management

    We used the print management in Windows 2012 r2 to deploy and manage printers, printers Nowdays, we do not see in print management. I read that the KB3170455 caused this problem but this patch it is important for the Security server. I think that the solution is to quickly remove this patch. Is there a solution for this problem?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Remote Desktop for Mac will not use the printer driver

    On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I need some features in the Epson driver.

    I installed the printer on the server and removed several times without alteration. When 'Use a printer connected to the Mac' is selected in the preferences of the DRC the printer is a printer that is redirected, but the use of the driver of HP. Printing from Mac works with all the features.
    On the server, we have 3 installed roles, file, desktop Services to remote and Web server (IIS) Services
    We have tried to map the printer with an EPSONRedirect.INF file that contains the following:
    ; EPSONRedirect.INF
    ; Printer mapping file for drivers side client-side Server
    [Printers]
    "EPSON TM - T20" = "EPSON TM - T20 ReceiptJ4"
    No idea how we can fix this?
    [Transferred to the Windows forum by moderator]

    Hello

    I suggest you to post the question on the following link:

  • How can I get networked computers running XP in order to use a printer that is connected to a computer that is running 7?

    How networked computers running XP home can use a printer (hp laserjet 3030) which is connected to a computer that is running 7 pro 64-bit?

    Seems there is a driver problem but I downloaded the driver several times and no luck. Telling me the wrong driver is installed.

    Firewall is also disabled.

    Printer is shared.

    I am far from a networker, so lame mans terms = please) thanks

    Hello

    These should help:

    Share files and printers between Windows 7 and XP
    http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

    Configuration network host connection windows 7, xp and vista
    http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

    Networking of computers running different versions of Windows
    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    =========================================

    More help at these locations: (Vista references also apply to Windows 7)

    Vista - LAN
    http://www.onecomputerguy.com/Networking/vista_network.htm

    Vista network and sharing Center
    http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

    Setting up a network home
    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

    Setting up a wireless network
    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    Home network, wireless network and computer networking Made Easy
    http://www.home-network-help.com/

    Windows Vista tip: How to install and connect to a wireless network
    http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

    Networking tutorial home
    http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
    Practically networked - everything you could possibly want to know.
    http://www.practicallynetworked.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I have the driver for my printer but when I run the wizard the drop down of printers who does not understand my printer HP deskjet 9650.

    original title: printer drivers
    I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.

    Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.

    Hi michelledumont,

    Follow the steps in the article.

    Resources for the resolution of the printer in Windows XP problems

    For reference:

    How to install a printer driver locally for a remote printer in Windows XP

  • Can someone tell me what software to use to print and scan from my MacBook pro

    I have Mac OSX Mountain Lion and I am trying to print and scan my 5510 Photosmartt wireless. I tried to use the full suite of HP and Apple software for the printer. The HP software does not find my printer on my network only when it is connected through USB. I used the option "wireless via USB" when I installed the software, but the process never went through a process of Wi - Fi as soon as I unplugged the USB cable it was impossible to find the printer. I also tried to add a printer manually using the host name of Bonjour that works but loses connectivity on occasions, but I am then unable to use the extras like the Apps that come with the HP software.

    I have an iPad which I can connect using HP Printer Control app but I was under the impression with the last update Apple what airprint totheirs device should work without the need for an application.

    I read all the advice of experts in many forums like this one and have tried everything, but I was unable to connect to my network without problem. I can scan, eprint printers EWS etc so I must be connected to the router and the Internet, so I really don't understand why I'm having these annoying problem. I know that I am not alone so concerned manufacturers should get it sorted and soon.

    I should also mention that I have a laptop win7 I have installed on the same netwrk and had printing and scanning works very quickly without any problem of connection at all.

    I'll be very happy to receive a solution from an expert very soon.

    Your suggestion is exactly how I installed the printer before but still had problems of connectivity with my MacBook. However I seem to have found the solution and it's, once the printer and MacBook on the same network I put then a static IP by allowing the software page to recommend a static address. Previously, I had chosen the static address manually by following the instructions provided.

    The difference now is that when I look at my page of router software the printer is more listed under DHCP DEVICE INFO, but I am still able to find the printers web page by inserting its ip address into Safari, as well as the EWS page

    This seems really healed my problems. Thanks for all your help.

  • How can I use a printer by means of radio waves

    Ok. I bought a new laptop with windows vista home premium that I run wireless.  We have a main home computer with windows XP, which is attached to our one printer (Lexmark).  Is it possible that I can use the printer to my laptop?  Its a pain to copy orders of the laptop, put it in the main computer, and then print it.   Help, please.

    Hello

    It is quite easy to share the printer on the Windows XP for your new computer laptop to use. There are a few prerequisites to make it work.

    (1) computer and laptop computer must be in the same workgroup.
    > XP, do a right click my computer and select Properties. Click the computer name tab
    > In Vista or 7, right click on computer > in ComputerName, domain... section, click on the "Edit settings" link on the right side.
    > Click the button Edit (ALL systems). Enter a work group that is the same for both computers. You can leave as 'Work group' If you want to.
    Make a note of the name of your computer!

    (2) on the XP system, click on START and open Printers and faxes. Right click on your printer and select sharing. Do not use the wizard, simply go to the sharing. Click on the "Share this printer" option Change the name if you wish. Keep it short and sweet. Click on apply and OK.

    (3) on the Vista/7 system and type, click Start > RUN
    (> Type > \\(your XP computer name) > click OK
    > You should see the printer. CCK-right and select Connect.

    That must be it... Your business in.

    Have fun.

    Mark <> Microsoft Partner

  • Can I use my printer Brother HL - 1230 on Windows 7

    We just bought a new Dell with Windows 7 hard drive.  Is it possible that I can use our printer brother HL-1230 with this set up?

    The site of the center of compatibility Windows 7 here:

    http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Brother%20HL-1230%20Laser%20Printer&v=Brother&uid=HL-1230ZU1&l=en-US&pf=4&pi=9&c=Printers%20%26%20Scanners&sc=Laser%20Printers&os=32-bit

    indicates that your printer is compatible with Windows 7. However, this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Brother-printer-driver-HL-1230-parallel-not/323e6eb5-5c8d-452A-9934-486d6d886fb1?page=1

    can be useful. A poster reports success using the Vista drivers from the Brother's Web site.

    Note: I recommend manually create a system restore point before proceeding if you decide to try.

Maybe you are looking for