printers met problem Windows 8.1

Similar Questions

• Window printers and devices Windows 7 hangs on loading

  With the help of windows 7 on a standard pc - not upgraded

  using the Server 2008 r2 upgraded since 2003 recently, so add pc win 7 to the field again

  copied across users profile etc but for some reason some devices and printers windows won't load

  There is a usb printer connected to the pc and I see that in Device Manager but only if I select Show hidden devices

  When you select devices and printers windows - there is no evidence in the analyses of bar window but progress across the top of the screen, but even when you get to the end after a long period of time - nothing is displayed, no monitor, pc, mouse, keyboard, or printer.

  Tried fix services bluetooth - no joy - haven't tried sfc - patch fix - no joy tried ms - no joy.

  Tried to create new things to profile user and re - copy but same problem.

  Other options...?

  Other users on this pc are not affected: printers and devices window opens normally with a full range of devices and printers

  Here is the common link of fixing driver issues

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

• No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN

  No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page for answers click v (English) in the United States and set on your tongue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Due to an unidentified problem, Windows cannot display Windows Firewall for windows server 2003 r2

  I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012

  display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings

  thanx

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• due to an unidentified problem, windows cannot display windows firewall settings

  I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings

  Any ideas on how to solve this problem?

  "Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
  Start > run regsvr32 hnetcfg.dll [Enter]
  MS - MVP - Elephant Boy computers - don't panic!

• "Receive error message" due to an unidentified problem, Windows cannot display WIndows firewall settings "when you turn the Windows Firewall

  Original title: how to enable the Windows Firewall?

  How can I activate the Windows Firewall?

  When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".

  I use Microsoft Essentials antivirus.

  Hi Tom,

  A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.

  Perform the steps from the link below and see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Hope this information helps.

• Firewall problem: "due to an unidentified problem windows cannot display windows firewall settings.

  I can't turn on my or even access my firewall settings. When I try I get the following message, "Due to an unidentified problem windows cannot display windows firewall settings" help?

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

  Original title: windows cannot display HELP fire wall settings

  I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.

  I want to check that it is on.  Any suggestions?

  I can't also on the wall of fire to the security settings in the control panel.

  Help

  Hi TomFlow,

  1. which edition of Windows XP you are using?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  You can try to start the Fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  We can refer to the article and try the steps.

  You cannot start the Windows Firewall service in Windows XP SP2

  Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Method 3:

  You can also try the steps in the following article:

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• "Due to an unidentified problem Windows cannot display Windows Firewall settings" on Windows XP

  Operating system: XP w/SP3. MS Security Essentials installed.  Problem: Cannot enable or disable the Windows Firewall; When you try to do, following statement appears; "Due to an unidentified problem Windows cannot display Windows Firewall settings.l

  I've seen this before when I try to make appear the firewall configuration panel before that my computer has started completely.  Wait a few minutes and try again has always worked for me...   But in this sense, it is possible that a piece of the network process which depends on the firewall is not started on your system.  Try to examine your system and Application logs:
  (Start-> Run-> "eventvwr.msc") or
  Start-> programs-> administration-> event viewer tools
  and look for errors in the process that may not have begun.

  HTH,
  JW

• Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.

  Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.  I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails.  When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder.  I have Windows XP with SP3.  This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files.  Help, please.

  Thank you

  You're still infected:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Answer the following questions on your next post: brand and model of the pc, what is your antivirus?

  Run all the analyses above, complete, such restart required.

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• There is a yellow triangle on top of my computer in the printers and devices window icon, does that mean?

  There is a yellow triangle on top of my computer icon in the printers and devices window, it says "Base system device driver in not installed".  I tried all the fixes and nothing has worked.  What is - this and I can remove it.  Has it something to do with my iphone and Hello which I get an error as well and can never settle.

  Hi Linette6491,

  yellow triangle indicates that you do have not all related drivers or program installed for you're printer, so log on to downlaod and the printer manufacturer's website and install the latest drivers

  You can also try the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Good luck