Printers Multifunction LaserJet 1536dnf impossible to set up the network in Lion scanning

Hello

I'm trying to configure ethernet scanning using my Laserjet 1536dnf. I am able to set up the network in Lion scanning. I was able to do in Snow Leopard. Can someone help me? It would be much appreciated. Thank you

Hello

If you have previously installed software, be sure to remove it using the option of the scrubber:

* Please note that the following steps will delete all HP software installed.

1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
2. Select Applications
3 select the Hewlett-Packard folder
4. double-click on uninstall HP application
5 follow the uninstall to prompt to select a device to uninstall
6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
7 approve any prompt to uninstall all HP software.

Once done, download and install the full functionality of Lion software:

http://FTP.HP.com/pub/softlib/software12/COL41268/IM-100565-1/HP_Lion_LJ_SW_v12.13.26.dmg

Make sure to install any update HP available by clicking the Apple icon, then software update

Tags: HP Printers

Similar Questions

  • Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

    I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

    (1) download the driver on the internet instead of the installation CD.
    2) with the help of msconfig with selective startup and disabled all programs except Microsoft.
    (3) creates the new administrator account and returned through it all.
    (4) turned off firewall and anti-virus
    The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
    Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

    Hi Gary,.

    Thanks for posting in the Microsoft Community.

    From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

    Let us try the steps from the following link:

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

  • Problem creating ad hoc network-error: Windows could not set up the network.

    Original title: problem creating ad hoc network

    Hello dear,

    When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

    I use windows 7.

    P.S. before I used to create the ad hoc network with no problems. But now no more.

    Kind regards

    Ana Paula Yousef

    Hello

     
    Did you change in the computer before this problem?
     
    I suggest to go through these steps and check.
     
     
    Method 2:
    Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
     
    You can also check:
     
  • Multifunction LaserJet 1536dnf printers: can scan on Yosemite on a laserjet 1536dnf MFP

    I have a laserjet mfp 1536dnf which can scan using a Windows 7 machine, but five users running Yosemite 10.10.3 cannot scan to it. We can print to it. Macs until recently were able to scan.

    I removed the printer and downloaded and installed the most recent driver many times and when I open HP Scan it does not recognize the printer.

    Any suggestions so I can scan again are appreciated.

    Hi happydog89,

    Do you mean that the printer does not appear as a Hello printer to add in the windows printers and Scanners?

    Usually this would cause network problems, if you cannot add the printer as your Hello.

    The access point must support multicasting, which allows to turn Hello to work and you'll also be able to scan. The multicast must be enabled on the router. If your are unsure how to do this, contact the router company.

    Please hold me.

    Thank you.

  • Printers Multifunction LaserJet Pro 200 m276nw: memory is low. Job cancelled

    Hello

    I'm new to the forum.

    I have a problem with my Laserjet Pro 200 with a message "memory is low. Cancelled work. »

    I read the other posts with similar questions and tried to do a hard reset to turn on him for 30 second and turning point. The message always appears.

    I tried to update the firmware, but the printer says that no updates are.

    I use a Mac Mini running on 10.9.5 software. I tried to update the firmware via USB, what has not worked at all.

    How can I access the memory of the printer and clear the whole print or add memory to the printer?

    I need help!

    Hi @Med_Stud10 ,

    I read your post and see that you have found an "Out of memory" error when you try to print. I will definitely do my best to help you.

    Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
    Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M276)

    If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver, you may need to click the drop-down list to select the printer name to add it in.

    Try to print again.

    I've provided the steps to set up the printer via the IP Protocol, if the problem persists, which regulated the other 'Out of memory' errors

    Print a Configuration page to get the IP address of the printer. M276n of MFP HP LaserJet Pro 200 color and M276nw MFP - print a Configuration report.

    Remove the printer in printers and Scanners.
    Click on the + button, select the IP Protocol on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

    Try to print again.

    For the analysis, however, you can select the printer Hello.

    If you're still having problems, try the reset I will send you a private message.
    In the forum next to your handle name simply click on the envelope to see.

    Please let me know the results.

    Good day!
    Thank you.

  • Color Laserjet CP1525nw: CP1525nw - wireless set up: 3 networks

    Due to a failure, our cable provider had to replace our modem. We use a router Linksys AC1600 jointly with the modem provided by BrightHouse; We have a hard office connected to the modem and 2 laptops connected wirelessly to the router.

    When the modem has been replaced, the installer created network (1). The Linksys AC1600 has two networks (2) and (5). Our computers are connected to the network (5).

    I tried to connect the printer to the network (5) using the router WPS button and the printer... bad idea. When I used the WPS button, I lost a wireless connectivity to the network (5) and now only a connection to the wireless network (1).

    Found printer Network (2). I discovered that if I changed my computer to the network (2) I can print, however, it's the slower network option.

    How can I tell the printer to connect wirelessly to the network (5)? BrightHouse is not able to help with this issue.

    Thank you.

    Each SSID must have a separate network name.  The 2.4 GHz as TEST and the 5.0 Ghz as TEST50.  It is never the same.  It's how tell you which SSID you are connected to.   If your ISP is a gateway device, you must put it in full bridge mode and turn off the router and just use your Linksys router.

    Only printers support eh networks 2 .4GHz.

  • Impossible to set up the account on the mail application

    I am new to windows 8 and I try to use the app mail mail calendars people trio apart, and am pretty dead on the use rather than other applications. My problem is that my phone is apple so I have an email from icloud I want to put in the icloud app is not available as a type of email, so I select the other option and then select the IMAP type but I can't connect to the server. Please tell me if its possible to add it to the app! I got it to connect with outlook, so I think it should work with this app as well. Help, please! :)

    Hello Megan,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    Do you receive an error message or a code when you say, 'I can't it to connect to the server?

    Thank you for details on the issue.

    This behavior can occur if the app files or settings are corrupt or missing.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run Troubleshooter app and then try to set up the e-mail account. This tool can automatically identify and fix problems with applications and the Windows store.
    See this link:

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    If this does not help, use method 2.

    Method 2:
    Please refer to this article and check if it helps.
    Reference:
    Messaging app for Windows
    http://Windows.Microsoft.com/en-us/Windows-8/mail-app-tutorial

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Try to set up the network between Windows XP Home edition and Windows Vista Home Premium.

    I had a printer connected to a laptop with window vista home premium that I want to share with my other netbook with Windows xp home.

    two computers connected to a network via a router adsl modem to connect to Internet.

    I put the two WORKING groups on the basis of the same name.

    checked XP network places haven't seen vista pc, I had even impossible windows firewall.

    in Vista PC I put the

    ---> private network location

    ---> all in sharing and discovery are enabled

    I had the two PC but still do not see each other.

    So, what should I do?

    Please help, I don't want to move the printer, nor the computers here and there in order to print something from these two pieces, maybe more with different windows in the future...

    Thank you.

    Kind regards

    Michelle

    Hello

    Maybe this can help.
    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have authorization and security problems, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot one

    Re just one example. Your list will focus on how your system is configured.

    ** Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

    ---------------------

    *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • LaserJet P2055DN - do not print over the network

    Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

    I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

    Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

    Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

  • Eclipse plugin Simulator - how to set up the network

    Hi I installed Blackberry JDE Eclipse plug-in successfully. My test app works fine on Simulator until he tried to open an HTTP connection to a URL (a real web address like www.google.comor localhost):

    Here's the code I used:

    S StreamConnection = null;
    Try

    {

    s = (StreamConnection) Connector.open (getUrl ());

    HttpConnection httpConn s = (HttpConnection);

    State int = httpConn.getResponseCode ();

    ...

    }

    So my question is how to set up the simulator so that it can open the connection to the network.

    Of BlackBerry MDS Simulator is packaged and installed with the plugin Eclipse and can also be downloaded separately if necessary. You can configure to start the MDS Simulator with your simulator of aircraft in debug/run dialog box. For more information about these steps, see the Eclipse plug-in for the next topic test a BlackBerry Application that uses an HTTP connection.

    To understand the parameter deviceside and information about network gateways, see the following resources:

    DB-00396: that is - different ways to establish an HTTP connection or socket
    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

    Video of transport network:

    http://NA.BlackBerry.com/eng/developers/resources/VideoLibrary.jsp#tab_ddetail_subtab_jde

    On BlackBerry's wireless data Transport Management - Part 1

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe?func=LL&objid=832210&objAction=browse&s...

  • Multifunction LaserJet 1536dnf printers: ADF rollers stuck in down position

    Feed documents through the ADF, the feed rollers will stay low and will only return to the position if the printer is power cycled. It is an intermittent problem. More of a nuisance than anything, but wouldn't mind getting this problem.

    Thank you.

    Hi @DeweyE,

    Welcome to the Forums of HP Support!

    I see that you are having problems with the ADF on your HP LaserJet Pro M1536dnf multifunction printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand that this ADF is in the correct position after restart the printer. Looks like there could be a problem with a lack of power that the printer receives, firmware glitch or the rollers slide.

    I would like to do a hard reset to see if that will solve the problem.

    • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
    • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
    • Try to use the ADF again.

    Then, update the firmware of the printer. Click here to download it.

    In addition, I would like to try the steps in this guide if you are still having problems.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • Multifunction LaserJet 1536dnf printers: HP Toolbox does not work after update of Windows 10

    My HP Toolbox worked very well and I was getting a fax to my computer until about a week ago. After the last update of Windows 10, HP Toolbox does not start little matter what I do. I tried to run as an administrator and tried to start through the command prompt, but nothing helped. I want to be able to receive faxes on my computer, but I don't know how I can do without the work of the box HP Toolbox. I uninstalled and reinstalled several times using the latest version of the software on the HP site and tried to install it with the original disc supplied with the printer but nothing seems to work. Toolbox HP will install, however, it won't work. I tried the diagnostic tools and I tried to run it in compatibility mode, but nothing seems to work. Someone please help.

    Hi @Alphas,

    Thanks for getting back to me.

    There is corruption on the computer.

    Try the following steps:

    If the problem persists: please create a new administrator account and reinstall the software.

    • Load the HP utility?

    NOTE: Windows 10 user accounts:  

    standard user (Users) - the standard account is a limited user unelevated account which can be a local account or a Microsoft account. It can help protect your computer by preventing users from making changes to the system that affects everyone who uses the computer. When you are connected to Windows with a standard account, you can do almost everything you can do with an administrator account, but if a standard user tries to do something that requires high rights (ex: run as administrator), Windows will display a UAC prompt for the standard user to enter the password to an account administrator for approval and confirmation before allowing the action.

    administrator user - is an administrator account unelevated which is created by default during installation of Windows, or is already set up for you on an OEM (ex: Dell) computer. This account can be a local account or a Microsoft account. An administrator account has full access to the computer and can make changes. If a user administrator is trying to do something that requires high rights (ex: run as administrator), Windows will display aUACprompt for the user administrator approval before authorizing the action.

    Built-in 'Administrator' - the hidden built-in high "Administrator account" is a local account that has unlimited access to the PC. By default, the 'Administrator' account is not invited by the UAC. Everything that's running while it is connected to the 'Administrator' account also will have full unrestricted access to the computer, so it is not recommended to use the built-in for daily use "Administrator" account. It is recommended to use only the account 'Administrator' integrated as necessary instead.

    Otherwise I would be 'restore from a system restore point' to the help of this guide, options recovery in Windows 10 or contact the HP support by phone.

    Contact HP for service in all countries except Asia-Pacific.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the results. I can't wait to hear strings attached good luck!

  • Printers Multifunction LaserJet 600: Laserjet MFP - tray 2 600 do not lift

    So I have a printer Laserjet 600 who repeat his tent raised tray 2 assumed that the engine is down I just here for an overview see if there is anything else I can do. I passed on trays just to make sure that it is not this, but still the message happens.

    Does anyone else have this problem? You can simply replace the engine? or does go deeper then that as a control on board is no longer sends the data to activate it?

    The number on the left indicates the number of page when the error occurred, the number on the right is the error code.

    In this case, your number of pages current is probably higher than the numbers on the left, which means that those who are the old codes and have nothing to do with the current problem.

    I just faked the problem on the M602, I removed the tray, determined which finger came out of letter size paper which is the middle finger.

    Then I reached in and pushed the switch from the Center to the bottom so that the printer has been trying to raise the tray and after about 10 seconds, he got an error 60.02. I repeated the process twice, in an interesting way, the first time that I had not seen the error immediately, I had to push the home button to access.

    I work under the assumption that your machine is not any additional trays under tray 2.

    At this point I would replace the DC controller, but I have a spare for troubleshooting if that would make it easier for me than for you.

  • HP LASERJET PRO m277DW mfp: Printers Multifunction LASERJET PRO m277dw WARNIN CARTRIDGE NOT RECOGNIZED PROBLEM

    After you download an update from HP, I can't print because there are the following warning: "memory of the cartridges defective material consumption in ciano black - yellow - red.
    How can I solve the problem?
    Thank you

    Hey @manekineko,

    Welcome to the Forums of HP Support!

    I see that you have some problems with a cartridge on printer Laserjet M277dw error. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the problems of the cartridge with your printer.

    Please let me know the results after following the above. If after following the above, you are able to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Printers Multifunction LaserJet pro CM1415fnw does not print in color.

    I have a hp pro cm1415fnw mfp laser jet in my office who does not want to print in color. I have a windows xp. Whenever I try to print in color out of windows from microsoft or the internet the picture comes out all black and not in color. When I print a diagnostics page it prints in color, however. I need help.

    Hi RicherdAC24,

    Follow the steps below to uninstall and reinstall the printer.

    1. open Control Panel

    2. click on uninstall a program

    3 uninstall the Laserjet CM1415 in the list

    4 restart your computer

    5. download and install the latest version of Adobe flash player

    6 download the drivers and full software functionality, and then reinstall the printer.

Maybe you are looking for

  • Unable to connect to the internet through Firefox or Chrome, but Internet Explorer works fine - what's up?

    Ping-works - I can get to google - but both Chrome and Firefox will not - connect I can't even download the Mozilla or Google code to reinstall BUT Internet Explorer (which I don't like) works very well Any ideas - just started to happen yesterday af

  • Impossible to update the app due to the payment

    I can't update my application because of the method in my AppleID payment was declined, this problem was because my Bank has banned any transaction with the apple store and steam recently (Maybank) that make me not able to update my application befor

  • Using a value of PeakX as a filter

    My question: I have a channel (NICE) that contains numbers between 8600-99999.  I have a sample County channel that tells me how many times a certain number of NICE hits channel.  Then I do the calculation PeakX and PeakY to determine top 10 of NICE

  • Digital chain

    I am creating a survey using labview, the program must go from 1 to 8 and according to location 8, he will publish a string that is associated with the digital.

  • Why my photos are open in Notepad

    My photos are for download on the computer and they are fine in the snapshot. When I double clip above to enlarge, they are coming in the notebook that I can't read. Can anyone help. Barb