Printers network returns to 'Use printer offline' system recovery (extended). Windows 7 SP1 all versions

Similar Questions

• I don't have a place to uncheck "use printer offline"

  My printer is offline - it's a jet of HP pro 8500 wireless desktop. I have Windows 7 Home premium. Each supposed to answer uncheck 'use printer offline' BUT I don't have that option when I right click on my default printer.

  Hi Canufixit2

  I would say to post this question on the forum Windows 8 rather than Win 7 one if you are looking for more answers ;)

  Suggestion above (to check on both computers):

  • Click Start, point to settings, click Control Panel, and then double-click Services.
  • On the list of services , click the remote procedure (RPC) call Serviceand then click Startup.
  • Under Startup Type, click Automatic, and then click OK.

  d. do the same for the print spooler service

  e. is your network discovery service works as well (if not is not implemented as noted above)

  I hope this helps.

  Muzzy

• HP 1102w: printer wireless, Hp 1102w reinstalled and says use printer offline

  Hello I recently changed my suppliers and changed to a router different had verizon has worked for years changed to twc with an arris TG1672g router I can print the first test wireless page, but when I try to print anything else in the see what's printing box it says printer use offline, I've tried printer audit of the United Nations in offline mode and then he goes to the printing error that it will work when I connect the usb cable from the suggestions

  Hey @Lucastrujillo59,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve the printer offline issues you encounter with your HP LaserJet Pro P1102w printer on your Windows 7 computer since installing a new router. Please follow the steps below to fix this problem.

  Step 1: Uninstall the drivers:

  Even if your printer prints first page initial well thanks to new wireless, there are chances that your drivers are not properly configured for the new network connection. I'll have to make sure that everything is installed and is successfully, you uninstall and then reinstall your drivers.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select your Printer HP Laserjet
  5. Select Uninstall

  Follow them on the instructions of the screen to complete the uninstallation of your printer. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start when you click it, type %temp% , and press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  4. Select "delete" on your keyboard. No real files and folders will be affected by deleting the temporary files on your computer. If one of the temporary internet files will still be used by a program on your computer you receive automatically pop up to 'jump' the question.
  5. Once you empty the Temp folder, close the file.
  6. Right click on your recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the full feature software and drivers for your printer
  2. Once the site opens click on the download at the top left button
  3. Allow the download to run when prompted
  4. Follow the prompts on the screen to reinstall your printer.
  5. After choosing the option Wireless printer should be found on your network. Select your printer and press 'Next' or 'continue' to complete the installation.

  Once the reinstallation is finished, please try again to print. Should you still be problems there are additional steps, I will have you go through. I can't wait to hear strings attached good luck!

• Use the same system recovery disk?

  I have exactly the same - HP Pavilion dv6406nr 2 laptops.  I ordered the system recovery disk for one, several months ago.  Can I use the same disk or do I have to order one especially for the 2nd laptop?

  Yes, they will work, if the model numbers are the same.

  .

• I used Print artist 4.02 with Windows 98 but does not work in Windows 7

  I have a copy of the Platinum 4.02 artist Print.  It worked with windows 98.  Now, I have Window 7 Home Premium and get an error when I try to download the program.  What can I do to make this program loaded on my system? P

  Artist is up to version 24...

  Nothing below Print artist 22 is NOT compatibible with Windows 7.

  You need to upgrade to the latest version...

  http://www.PRINTARTIST.com/

• MSG come insert automatic system recovery disk windows & ihave not this type of dick that how can I do?

  How can I start my pc when msg came "bootmgr is missing" I have no any drive

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• System Recovery Options Windows Vista Home Basic x 32 help

  I have a gateway with Windows Vista Home Basic x 32.  Recently, it would break any chance and will have to be turned off manually.  Some options in the start screen and I would always click on start windows normally.  Today, I went through the process and came up with the blue screen of death.  He said that if this is the first time you see this reboot, so I did.  Then the blue screen of death came once again, and he said to go in the system recovery options.  Having no idea how to do that I restarted again.  Then the recommended option was to go into system recovery thing, so I said to myself Oh well it will fix itself.  I went in there and he brought me to the system recovery option screen.  It is said to find my operating system in a list and there is no operating system indicating.  Then I read and it says if you do not have an operating system, then load the drivers here.  I click on that and there is a list of about 50 cases.  Inside of some folders are folders more.  I can't possible go through all records to find driver software that he wants me to.  I also never had a disc of windows vista with the purchase of the computer

  I have a gateway with Windows Vista Home Basic x 32.  Recently, it would break any chance and will have to be turned off manually.  Some options in the start screen and I would always click on start windows normally.  Today, I went through the process and came up with the blue screen of death.  He said that if this is the first time you see this reboot, so I did.  Then the blue screen of death came once again, and he said to go in the system recovery options.  Having no idea how to do that I restarted again.  Then the recommended option was to go into system recovery thing, so I said to myself Oh well it will fix itself.  I went in there and he brought me to the system recovery option screen.  It is said to find my operating system in a list and there is no operating system indicating.  Then I read and it says if you do not have an operating system, then load the drivers here.  I click on that and there is a list of about 50 cases.  Inside of some folders are folders more.  I can't possible go through all records to find driver software that he wants me to.  I also never had a disc of windows vista with the purchase of the computer

  Hey EricLeonard

  link below has the various processes of recovery vista gateway described for you

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  what you want in the above link looks like this below

  Gateway System Recovery from the hard - the following are methods to recover or repair the computer using the recovery of hard drive partition.

  • Complete recovery plant
  • Restoration with automatic data backup
  • Windows recovery environment

  If you have problems with it contact gateway for support

  They provide their own process of recovery for vista

  http://support.gateway.com/support/SRT/allsysteminfo.aspx?cmpid=headerlink

  have a Happy New Year

  Walter, the time zone traveller

• No CD operating system created by the function 'Create the recovery media' - Windows/Vista/SP1

  I bought a R61 with Vista Business installed for the purpose of this downgrade to Windows/XP. I noted with interest that the system had arrived with VISTA/SP1 is installed. First thing I did was summon the Thinkvantage Rescue to create and support recovery in the case where I decided to go back to Vista at some point in the future. After you have created all of the proceeds of the recovery disks and being the creative professional that I am, I decided to test the newly created disks. Three DVD has been created. When I tried to restore the system from these backups, I learned that I didn't have a CD of the operating system. None of the 3 DVD was recognized as a CD of the operating system. Unfortunately at this point in the process, the hard drive had been wiped out and I didn't have a working computer. My only alternative was to restore using the recovery media to Windows/XP that were in the area and call Lenovo and request recovery Vista media. They arrived very quickly, so I deleted the XP image and restore the image of Vista from Lenovo's Vista recovery disks. I was very disappointed to discover that there was no SP1 Vista recovery disks. To make matters worse, when I tried to call the 'create recovery media' of this image of Vista, I even created a box of 3 DVD recovery DVDs that once again, did not contain an operating system CD.

  I find myself with the situation that I can't get the exact picture that was on my computer, when it left the factory. I don't know that besides as SP1, it should have been revised pilots and others who came with this machine originally, and which I am not aware. These could create strange incompatibilities I had to install Vista/Sp1 from the Microsoft site on top of the current generation of Vista.

  Is it possible to get a Vista Business/Sp1 for the R61 recovery support?

  Moreover, my computer is Windows XP now and recovery media created from this environment of work like a charm. I know. I tried them.

  It took a few months to get a handle on this, but here is the final solution.

  First of all, the person who suggested that if the first media was on DVD, to copy it to a CD to work had no idea what they were talking about. Either works just as well, even if Lenovo suggests that the first must be a CD.

  As usual, the 'problem' was caused by poor documentation. When you perform a set of recovery using Rescue and Recovery Media, you do not create an "operating system CD", and this is normal. When you get a set of recovery CD / DVD from Lenovo, you will always get one which is marked "operating system CD.

  Different sets through processes of different recovery and rescue and recovery needs to know what kind of game you have, it allows to perform the correct process.  It does this by asking the question "Do you have an OS CD?" Based on the answer she executes a process or another and expects different content on the CD / DVD that are presented to him. You cannot mix DVD upward between the two processes. If you say Reccue and recovery that you have a CD of the operating system (ie. provided by Lenovo) and present it with media created by you using the process of "Creating rescue media", the recovery fails.

  Finally, I went back and restored my machine using the DVD that I created initially using Rescue and Recovery. I answered 'NO' to the question "Do you have an OS CD?" and ended with a perfectly functional R61 VISTA/SP1. He didn't stay for long, however. Then I reinstalled XP using the provided Lenovo recovery CD, I answered YES to the question and ended up with a fully functional XP R61. Now, everything's fine.

  ,,

• I'm temporarily using a diesel powered computer, running Windows XP Home Edition, Version 2002, Service Pack 3

  I temporarily uses a computer filled with diesel fuel, until I can afford to replace it with an updated model. It is using Windows XP Home Edition, Version 2002, Service Pack 3.
  The problem is that it's totally out of memory and as far as I know, I deleted everything I can, short of service packs and security features, such as malware and anti virus.
  I do a disk Clean up and Defrag on a regular basis, but it shows now that I have zero remaining memory.
  Anyone know how I can free up more memory?
  What happens if I delete ServicePack 1 & 2?
  What happens if I use the restore disc came with the computer? It will remove everything and I start with a clean slate?
  Unfortunately I can't replace this computer for a few months more, what should I do?
  Thank you
  Monica

  You run lack of disk space, not memory, if that's your hard drive, you're referring to :-)

  If you have the service pack installation files on your PC, you can probably pick up near a GB removing them (most likely you do not have).
  You can remove security updates uninstall files and pick up some space here: http://news.cnet.com/8301-13880_3-9862223-68.html
  If there are programs that you use rarely or never, you can uninstall them.

  If you use the recovery disk, it most probably restore you to the day; No program, no service pack, no update of safety, nada, just WinXP right out of the box. I wouldn't recommend, unless you have nothing better to do with your time than to reinstall all your stuff. And if this isn't in SP3, then you will not be able to download updates of security.

  If you have a little cash on hand, you can always get a bigger hard drive and clone this player to the largest (most new hard drives come with software to do). Or if you have geek friends who save ALL their old stuff (like I do), maybe one of them would have a replacement part that they would be willing to give you. Wouldn't hurt to ask :-)

  SC Tom

• hp photosmart printer shows 'offline', but 'use printer offline' is unchecked. wired network

  I have tried turning printer off, power, switch on without having the network cable is connected and in reconnecting it after its start-up.  What I have to uninstall and reinstall the HP Photosmart C6100 series printer, or is there a simpler solution?

  I guess that's Windows?  If Yes, go to control panel > printers.  Remove the printer in question.

  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Missing startup programs, printers uninstalled and run used print spooler

  Hi guys,.

  The title really says it all.   I am running XP.
  I tried to use my scanner but it will not work properly.
  I tried to use my printer laser hp 8000 and Canon S800 deskjet.   They are more installed and when I try to install I get an error that says that the print spooler is not running.
  All programs are missing in commissioning.   If I click on programs, then I can find them.
  Any ideas?   I ran, but I'm not all that good in the first place.
  TIA
  Greg

  "Missing programs" indicate likely malware infestation.  What do you use for an antivirus application and is his current subscription?  Have you let the subscription expires?

  Start with the download, install, update and run an analysis complete with each of these tools free amtimalware.  Do not run the scans at the same time.  Each is likely to take some time, so have something else to do.

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  Now for the symptoms.

  Hidden entries in the start menu > all programs

  Beginning > menu all programs is a combination of two folders (directories) on your hard drive:

  C:\Documents and Settings\All Users Menu
  C:\Documents and Settings\\Start Menu

  If the subdirectories in one or both of the above is given to the "hidden" attribute, you will not see the corresponding entry when you click Start > all programs.  To check and fix this, right-click on the Start button and select "Open" or "Open All Users" (you should do as well until you're through).  In the window of Windows Explorer that opens, click Tools > Folder Options > view.  Click on the button "Show the hidden files and folders" and uncheck "Hide protected operating system files (recommended)."  OK your way out.

  Double-click the programs folder.  Any folder that is hidden will appear "disappear".  Right click on each hidden folder, and then select Properties.  At the bottom of the general tab, uncheck the 'hidden '.  Click OK.  Select "apply changes to this folder, subfolders and files. Click OK.  Do this for all the hidden folders.  When you are finished, go back to tools > Folder Options > view and the changes that you have made previously.

  Repeat the above by right clicking on start and select open or open all users, no matter what you is not done everything first.

  Print spooler does not and empty the folder printers and faxes

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line (don't forget the quotes)

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on this site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• my computer crashed and restored using the system recovery disk. I saved all the files using a .fbw format. I can't read. What should I do?

  My computer crashed while updating. It's a double 4 year old HP desktop processor. I could get into the repair screen, but nothing would be useful. I backed up data (115 GB) using the tools available on a drive hard usb. They are under the folder MINWIN and meet 31 different files. All I get is the demand to put in the disc. I copied the last file on DVD, but it will not read it. All other recovery programs say there is no backup file.

  I have backup, with an extension of FBW 32 files
  Help

  Hello

  1. are you able to boot to the desktop now?

  2 have you tried to reinstall the operating system?
  3. what program did you use to create a backup?
  4. do you get an error code or error message?

  According toOberwald, it seems that fbw files are generated by HP, not Vista backup tool. I suggest you to read the following article to restore files from Microsoft.

  Backup and restore: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  If you are not able to boot to the desktop, then I would suggest trying the following methods and check if it helps.

  Method 1:
  Start in safe mode and then try to run the restoration of the system to a point before you install the update and check if the problem persists.
  Step 1: Start in SafeMode in Windows 7:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: System Restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/features/system-restore

  Method 2:

  If you used a third-party program, and then try to restore using the same program and check that it works.

  Also check the FAQ from HP or post the question on a forum of HP.

  Hope the information is useful.

• I used on my Toshiba Recovery CD, Windows Vista and now none of the drivers is installed. I can't connect to the internet. Help!

  Some drivers to try to install automatically, but after each reboot, they try to re - install again. I am not absent/not search for drivers, because I can't reinstall my network card.

  Hello

  Go to the Toshiba site on the computer that you use to get here > drivers and downloads Section > key in your Toshiba model number, then the operating system > find, download and SAVE the adapter, Chipset drivers, etc on the desktop > copy to a Flash drive and transfer them to the other laptop.

  http://support.Toshiba.com/drivers

  See you soon.

• How to print full-size in Gallery windows live photos (current version)

  I feel everything simply perplexed. Clearly, Miss something.

  I can't find any button, menu, etc. to adjust the size of the photo I want to print when I'm in the dialog print drop down. Not 100%, 50%, or any other adjustment of the size.

  For example if I have a picture that is 2 x 2 "and I want to print using its actual size on a sheet of letter size paper - I can't find a way to do this...

  the application extends the picture beyond the borders of the paper - cropping (with the 'fit the picture frame' option checked) or if this option is "unchecked" - it extends from the photo on the edges of the paper distort in a gross enlargement.

  This is also true to print with a reduction in the size of the picture - say 50%...

  can anyone help?

  Thanks in advance.

  see you soon-

  Cindy

  PS: I don't want to use the 'photo' of windows 8.

  I feel everything simply perplexed. Clearly, Miss something.

  I can't find any button, menu, etc. to adjust the size of the photo I want to print when I'm in the dialog print drop down. Not 100%, 50%, or any other adjustment of the size.

  For example if I have a picture that is 2 x 2 "and I want to print using its actual size on a sheet of letter size paper - I can't find a way to do this...

  the application extends the picture beyond the borders of the paper - cropping (with the 'fit the picture frame' option checked) or if this option is "unchecked" - it extends from the photo on the edges of the paper distort in a gross enlargement.

  This is also true to print with a reduction in the size of the picture - say 50%...

  can anyone help?

  Thanks in advance.

  see you soon-

  Cindy

  PS: I don't want to use the 'photo' of windows 8.

  ==========================================
  First... 2 x 2 "looks like a Photo ID... If it's
  what you try to print the following free site...
  maybe worth a visit:

  OddPrints - print your own passport pictures
  http://www.oddprints.com/Passport
  (Start by scrolling down
  of the page and left click on 'Get Started')

  And now, to answer your question...

  Photo Gallery employs only a few specific models.

  The following freeware is very versatile and can do
  exactly what you're asking:

  FastStone Image Viewer will allow you to photos of the Crop
  the exact size required, and then print the Photos
  the right size.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows 98, ME, XP, Vista, 7, 8)
  (Download from Site 2)

  FastStone Image Viewer tutorial
  http://www.FastStone.org/FSIVTutorial.htm

  To crop your image to 2 "x 2"... and print "
  it exactly that size... try the following steps.

  First, you will need to download and
  install the program.

  Now, open the program and select
  the photo you want to crop and print.
  The selected image is displayed in the
  at the bottom left of your screen.

  Now, go to... Edit / crop Panel (or type X)

  Click on the button 'Set Ratios of paper'.
  (it's just to the right of the proportion of paper
  fall of window)

  Click on the 'Add' button and enter...
  2x2inch... click on... Ok...

  Open the "Ratio of paper' drop window
  then 2 x 2 inches.

  Adjust the bounding box to include the
  exact part of the image you want to
  include in your photo ID done.

  You can resize by dragging the corner
  handles and reposition by dragging the
  arrow 4 positions. At the end... Click on the 'culture '.
  button.

  Now... to... File / print...

  Open the 'Size' drop window and choose
  'Normal '.

  Click on 'print '.

• Failed disk Seagate used CD of HP recovery and windows won't complete installation...

  Hello long player date people initially displays......

  I have an older machine of the HP A6567c... that has been modernized with almost new under the motherboard, processor and ram... Ive swapped the power provides the gpu and of course HD... heres so my question...

  I use a 1 TB hd seagate... Recently it failed on me, so I sent away from replacement since it is under warranty... they me sent a disk of 1 TB of Nice refurbed which is half of the width of my other more old... which I thought was weird... but I installed it anyway... I ran the cd HP 3 recovery al was going well until he went to complete your installation of windows... and then I got an error message saying: could not complete my installation of windows... Please reinstall windows... I was stunned... Ive replaced maybe 4 or5 readers in my time and I've never seen elsewhere... so, I read somewhere to disconnect printers and GPU and nothing that I did this retrial and same issue... so I went diggin' autour and found an article stating that more old CD of HP recovery do not allow some drivers be installed on recovery as what the new style HD session require... and skip this premise I ended up finding a few articles more where people have said the same thing...

  So im at a loss for why the recovery CD don't work... someone knows if there are more recent style recovery CD that work with the new drives? Ive read some forums of HP where others had the question and have had mixed responses from HP support a tech saying they had to buy all new recovery CD, while the other tech said a customer they should improve their OS... I guess that I wouldn't mind upgrading to Win7 from my vista home Prem 64 I hear win 7 is better... but i only run 4 gig of ram so win7 would go on my computer?

  Also if there is a new hard drive in style... What's the beef with them? What makes them so different for older... Unfortunately with this being a holiday weekend im GROUND on get ahold of Seagate... so im stuck waiting til dec 1 Monday to get their hands on them... but I was hoping someone could find it and give me some ideas...

  Thank you

  Starbuxx

  Hello

  Run the hardware BIOS diagnostic and make sure that your PC is OK. Check with Seagate and be sure that the hard disk that you received is not a drive hard format advanced, because these types of discs will not work with former HP recovery programs.

  If your PC does not have BIOS version 5.32 or superior and a 7 GB or more then remove some DIMM memory in order to reduce the total less than 7 GB.  You can install the latest BIOS updates after the recovery of your PC.