Printers using the HP02 cartridges?

Similar Questions

• What current photo printers use the 178 cartridge ink?

  Just take a big lightning hit on my HP Photosmart Premium all-in-One aging and it is a write-off.

  Problem is I have about a dozen unopened 178 ink cartridges in a drawer and certainly not want to throw away them.

  Are there current HP photo printers that the 178 - and they are all good? I was reasonably happy with the Photosmart Premium (C309 was the model), but there are certainly better machines to print only one photo on the market.

  All-in-One or photo only? Photo printing is the priority n ° 1 (amateur, not pro level), followed by regular printing, even if I have another older HP machine which can take care of the day-to-day things. Then comes the scanning and copying. These days, I find I'm using fax very, very rarely...

  No matter which input received with gratitude.

  TKS

  Chris Gibbons

  Hey there Chris

  There are a number of printers that take the HP178. Take a look at the Photosmart printer Buying Guide. Something like the series PS 5510 I think would suit.

  In any case, have a look at the guide and if there is something more that I can help with just let me know

  http://h71036.WWW7.HP.com/HHO/us/en/EP/index/Photosmart-all-in-ones.html

  PS - this guide is intended for the United States you may need to change the location of the country in order to get the right printer model no.s (they vary slightly depending on the region)

  Ciara

• Can I still use the toner cartridge after deposit of 2 and a year and a half?

  I have a HP CE505A toner cartridge model in a sealed box, but the box have a date on it his 20111003 (I think that refers to October 3, 2011). Now my question is if I unseal the box can I still use the toner cartridge (whereas 2 years and a half elapsed from the date on the box), or if I buy another cartridge of toner?

  HP Laserjet toner cartridges are usually not a particular lifecycle or expirary date or end of warranty.

  You can use all your stored correctly with your printer laserjet toner cartridges & most probably you shouldn't find any problems or defects on them, until the cartrdiges are sealed pack & storage, or weather conditions (heat, moisture, and direct light from the Sun) did not cause any damage to the cartrdiges.

  Please consider reading this useful document related to the storage and handling of the HP laserjet print cartridges:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-bpl02955-5%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401253189408.876444892.492883150

• printing with printer deskjet 2050 using the black cartridge only

  printing with printer deskjet 2050 using the black cartridge only

  all solutions? PLIs answer me. thanx

  Hi d33com,

  Follow the steps below to set the black ink only.

  1. open the printing preferences (step 1)

  2. click on the Advanced button (step 2)

  3. click on the drop down arrow next to the print in grayscale to change black ink only.

  

• My 3-in-1 uses the color cartridge for copy/printing black a black paper on the glass top...

  My 3-in-1 uses the color cartridge to black for a black document on copy/printing tray, but use black cartridge to print in black from the computer itself.

  In other words:

  (1) if I have a document with a black print in Microsoft word on my hard drive and I want to print this document in black print, while the 3-in-1 works fine. In other words, is the black cartridge can print a document in black to a black document.

  (2) if I take this same document which has just been printed in black and put one on the glass and try to produce a black document thereof using the copier function, the 3-in-1 uses the color cartridge to produce the black document... .more is very slow (the same speed it would be if I were to produce one side of color of color documents.

  Of course, it cannot be the black cartridge.

  Through a long trial and error process, I got lucky and I resolved and the resolution is not what I was expecting and makes no sense to me.

  Use the settings of the printer itself, I just changed the setting from "automatic" to the "plain" paper and the setting in 'text' value 'None '.

• DeskJet 5500: When the printer uses the 57 cartridge?

  I thank very you much for your reply to my last post. Makes perfect sense.

  I'm doing a huge amount of B & W / grey scale printing; I use 56 about two cartridges a week and I reload them successfully for a few tens of cycles each.

  My 57 cartridges also mpty very frequently while I print almost any color - the only color is perhaps a small logo on the page.

  I tried to use the gray filter in Macintosh 10.4.11 system to send a grayscale image to the printer, but the 57 cartridge still empty quickly, even if the printed color is negligible.

  If the page still contains the least amount of color, 57 cartridge automatically prints the whole page, or the cartridge 56 prints black and the 57 print the little bit of color?

  If the 57 prints the whole page if it contains ANY color, is there anything I can do in the impression of New York to get the printer to use the cartridge 56 instead? I took to remove the cartridge 57, but when I put again, the printer goes through the cycle of test page, I want to avoid if I can.

  Thanlk in advance for your help.  I can't tell you how much it means for a user that a knowledgeable HP employee has actually answered questions through this forum. Other companies to let users themselves, often to hang in the wind without usable responses.

  Many use printers, not only HP, so-called 'underprinting' this is the pose of an ink of color on the page before the black ink.  Essentially, it is a primer for the paper.  The color dries quickly and is a base for black ink, allowing it to dry and cure without spreading out on the page.  If you have already printed with the cartridges out of alignment and saw a blue or magenta shadow to your text, you see the underprinting.  That's why, when the same printing black text, the printer uses a color ink.

  This printer is able to print reserve mode, which means it can print with 1 single cartridge installed.  The printing speed may be slower, but it's an easy way to make sure you are not using any color.  For reserve mode, remove the cartridge you want to use.  (Find a hermetic place to store this vertical cartridge with the nozzles pointing down as it is when it is installed in the printer, or it will dry out and become useless!)  To leave the reserve mode, put a good cart in the empty slot.

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• OfficeJet Pro 8610: New printhead - printed without using the installer cartridges - want to use

  Has had a chance to offer a new free printhead when one would not accept my new replacement ink cartridges.

  Didn't I have to use new ink cartridges supplied with the new print head. On the contrary, kept all the cartridges no-SETUP, that I had just bought. Printer accepted them and printed a huge amount of things. Some of the prints seem too dark. Now the printer asks to change the cartridges and will not accept the cartridges SETUP.

  (1) is my printer not configured correctly because I haven't used the SETUP with the new print head cartridges?

  (2) is it possible that I can get the printer accepts CONFIGURATION ink cartridges so that I don't have to lose their?

  If the printer did not print installing cartridges and now you want to use them, it will not accept them. I'm sorry. Replace ordinary cartridges.

• HP7520 printer using the photo cartridge during the printing of the documents not General and black print cartridge

  My 7520 printer uses the photo and not the General black cartridge when printing on plain paper documents. The black general still full but my photo cartridge runs out of ink.

  Hi shay!

  My apologies, I didn't know that your prints come out in blue print when you have a totally black cartridge. It is a problem of print quality with the printer or something in the settings of your computer.

  I suggest to try the steps in the guide below. You have already tried some troubleshooting, try so the steps that you have not yet tried, I understand:

  The streaks of ink fixing, faded prints and other common print quality problems

  If you're still only able to print in blue (no black print), so I recommend you call HP to let them know. As you mentioned you have only had the camera for 3 months, it is likely under warranty and you might need a spare part or unit.

  Here are the details of HP:

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  I hope this problem is solved for you, have a wonderful Wednesday

• Issue using the ink cartridges.

  I just replaced all my ink cartridges (and now black twice). He did not print documents sent by my iPad or make copies. However, it will display the printer status. I cleaned the print heads. It is then printed out-of-print diagnostic quality showing all my color cartridges are full, but nothing for the black. I clean the printhead three times now and same thing.

  Hello

  Many printers will not print if any of the ink cartridges do not register. If
  You can remove and reinstall the black print cartridge (had to do that to my)
  Printer Brother last night).

  OEM for the printer manufacturer is responsible for the proper functioning of the
  printer and their drivers. Check with their support, their online
  documentation and drivers and ask in their forums (if any).

  =============================================

  The main issue "might" be the engines, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with photosmart c4380 using the black cartridge XL

  Why my photosmart c4380 suddenly not recognize the Black XL cartridge which was working previously?  When I replace it with the previous cartridge (standard size), he seems to recognize and begins the process of allignment.  I have another XL cartridge, but at nearly £40 a go, I am reluctant to that that I'm already using waste AND another a new.  I get the warning message indicates that a cartridge is missing or not detected.  Anyone has any ideas please?

  I found it - I knew that it was there!

  This is a link to a youtube video that tells you how to do it.

  http://www.YouTube.com/watch?v=euzrPLMqDNc

  This sequence should be added at the end of the document that designates any person who responds to this request.  I don't understand why it is so difficult to find this answer? What can do this code? If the answer is not much, then surely its evidence suggesting people try to hp?

• How to monitor oc4j 9.0.3/4 &amp; JDK 1.3 using the JMX cartridge.

  Hello world!

  I want to follow the oc4j 9.0.4 on windows server 2003 using JMX. But the jdk 1.3 does not support the connection of jmx.

  What could I do?

  Thank you!

  As you note, JDK 1.3 does not JMX support, so you can use the JMX monitoring agent.

  Similarly, JDK 1.3 is too old to be supported by the Java agent.

  Older versions of Java JDK 1.3 are "not updated with the latest security patches and are not recommended for production use." http://www.Oracle.com/technetwork/Java/javasebusiness/downloads/Java-archive-downloads-javase13-419413.html

  You can monitor older versions of OC4J using:

  -Agent infrastructure for monitoring the use of process and OC4J resources on the host

  -LogFilter officer monitor the application log file

  -End user agents to control the specific transactions synthetically or any site web sessions passively

  Kind regards

  Brian Wheeldon

• Do I have to use the color cartridge if I want just the black and white to save my color ink cartridge?

  I have a HP Officejet 4500, system is window7

  Hello

  Yes, you can select 'Gray levels' print and keep as a default value.

  Kind regards.

• Printers using 21 and 22 cartridges.

  My HP Deskjet 3940 faithful just failed.

  The HP Deskjet 3940 is still available in the trade?

  Is there any other (currently available) HP printers that use the same cartridges as I parts requiring the use?

  Thank you very much

  Hello

  You may find it difficult to get a DJ 3940, because I think that it was introduced about 5 years ago. The HP21 are compatible with a number of different printers...

  http://h10010.www1.HP.com/wwpc/IE/en/Ho/WF06c/A1-12771-64199-69422-69422-455698-455702.html?JumpID=reg_r1002_ieen & lang = to & CC = IE

  Hope this helps

  Ciara

  General and features presentation

  Overview	Print HP 21 cartridge black inkjet with HP pigment inks print professional documents with laser-quality black text. Results, you can count on a wide range of paper ordinary and specialty media.
  	Standard Reliable ink for precise moderate impressions and every day. Trust original HP inks. Black
  Hardware compatibility	HP Deskjet 3910, 3920, 3930, 3940, D1311, D1320, D1330, D1341, D1360, D1420, D1430, D1445, D1455, D1460, D1468, D1520, D1530, D1560, D2330, D2345, D2360, D2430, D2445, D2460, D2468, F2110, F2120, F2140, F2180, F2185, F2187, F2210, F2212, F2235, F2240, F2250, F2275, F2280, F2290, F325, F335, F340, F350, F370, F375, F380, F390, F394, F4135, F4140, F4150, F4172, F4175, F4180, F4185, F4190 and F4194 printers HP Officejet 4315 and J3680 all-in-One printers and HPPSC 1410 all-in-One
  Name of the product	HP 21 black inkjet print cartridge

• List printers using HP01 cartridges?

  I'm looking to replace my Photosmart printer who was seen feeding problems.  I still have a number of expensive HP01 cartridges.

  Is there a list that shows which printers use the HP01?  Or a way to know definitively that no currently sold printer uses the HP01?

  I'd hate to get the manuals for each printer what is for me to find this information.

  wildcatherder wrote:

  I'm looking to replace my Photosmart printer who was seen feeding problems.  I still have a number of expensive HP01 cartridges.

  Is there a list that shows which printers use the HP01?  Or a way to know definitively that no currently sold printer uses the HP01?

  I'd hate to get the manuals for each printer what is for me to find this information.

  Could you confirm the printer model?  I do not recognize the HP-01 as a Photosmart cartrdige (can be a regional issue, the number of different cartridge in different regions).  The best way I found for numbers of cartridge for printers is to search on the site of HP pageyield the cartridge number and then look at the recent (introduced 2005) printers.