Printing a Configuration Page - Laserjet Pro CP1025nw

Similar Questions

• LaserJet Pro cp1025nw MAC OS 10.8 wireless configuration

  I have a new HP LaserJet Pro CP1025nw color printer, an iMAC running OS 10.8, an iPad and iPhone.

  I configured the printer very well via USB port of the iMAC.  I can print from the computer, but I can't leave my iDevices.  I understand that I can no longer use the CD that came with the printer, or the last download of HP to set up the wireless or install the new firmware because I get the "install HP' can not open because he...» "error.  So I have three questions 1. How can I configure the wireless on the HP printer using my iMac running 10.8, 2. How can I activate Apple's AirPrint and 3. How to install the latest firmware (ver. 20120130) in my printer using MAC OS 10.8.  Your help would be great.

  None of the options I found in HP forums allowed me to configure my printer wireless using MAC OS 10.8. I've been by the dint of borrow a laptop running windows 7.  I plugged in the wireless, used the disk supplied with the printer to install on the network, downloaded the upgrade of farm and installed it. All my apple and iDevices computers see the printer. It works like a charm.

• life cycle of the product of the HP Color LaserJet Pro CP1025nW?

  As far as I can see, the HP LaserJet Pro CP1025nW of color is a good product. As a tech support impression of our company, I was invited the lifecycle expected from this product. This model will be based in 'X' years? The supplies will be available for this product?

  Hello McGinnis,

  It's always a little hard to say anything with a 100% certainty about the future but the CP1025nw was released in 2010 and usually (replacements and new parts) services and support would be available for about 6 years after that. Even after this, it is likely that drivers would be released to or included in new versions of operating systems. For example, the PSC 2110 was released in 2002, and although there is no driver/software package to download from the HP website there at least the drivers included in Windows 7. About supplies (well, toner cartridges) I can not guarantee anything as such, but it is very likely that you will be able to buy those for even longer after that services are no longer available for the phone itself, an example here is a 900-series Deskjet printer. The first of the Deskjet series printer 900 printers were released in 1999 (I think) and you can still buy HP cartridges for these printers.

• LaserJet Pro 200n: problem printing PDF with HP Laserjet Pro 200n

  Hello

  I have problems printing of PDFs of our color laserjet pro 200 hp MFP M276n.

  I get a sheet of paper and a blank message on the printer saying 49 service error - power off, then on

  I can print from word/excel documents. It started only recently, and the printer used to work properly. I have updated the firmware of the printer from the Web site and also downloaded the new driver software and deleted, reinstalled the printer.

  Connected printer throgh network, using the static IP address. I have reset the default printer and reinstall with a different IP address. The problem still exists.

  Let me know what to do for them.

  Hello

  My printer now works, and it is wrapped only because two or three color toner runs out, and the printer to enter this mode. Really stupid... as I tried to print the document B & W, and then set the options pint to print grayscale.

  In any case, the solution for me is that make sure toner all have dye in it, and youi don't have no cominng message saying 'Replace cyan"etc...

• LaserJet 1102w: force print the second page, Laserjet 1102w

  Hello

  New laptop.  I can print fine from the front.  When I try to print double-sided printer, as normal stop, after that the first page is complete, but used 'popup' support to continue does not appear.  OK, I'm working on this one.  But is it possible that I can press something on the printer to say "go ahead, print the second page."?

  Thank you!

  Evan

  Hello @evanmjones,

  It is a great place to get help! I read your post and see that you do not get the option "Continue" to print the second when the double-sided page. I want to help you solve this problem.

  You can continue the second page by opening and closing the printer cover. (this model does not have a resume button)

  Make sure that manual duplex printing option is selected from the printer driver:

  1. Click on the Windows icon (), and then click devices and printers.

  2. Right click on the HP product and then click on printerProperties.

  3. Click the device settings tab.

  4. The manual Duplex allows to "Enabled" and click OK to save the change. (click on the + to expand the list)

  Ensure that the bidirectional Support is enabled.

  Go to start, devices and printers, right click on the printer, the printer properties, click the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  Try to print again.

  If you're still having problems, try printing from another application to see if you have the same results, it could be a setting in the application of double-sided printing.

  You need to maybe uninstall and reinstall the printer if the problem persists.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• HP LaserJet Pro CP1025nw: HP LaserJet Pro CP1025nw

  Hello:

  I just installed a new pack of toner from the printer.  It will print a page of test OK but can not print any regular file.

  The top light should light up when the p. printer is on but does not work.  The bottom light instead.  It will not print any document.  Any suggestions?

  Hi David:

  You went to a lot of trouble trying to help me, and I want to thank yhou for this.

  Moreover, the "op" was short for work.

  David, what happens is that when I have a file open on the computer, then click on 'print', it send it using the configuration screen (number of pages, etc.).  and check things, it shows that the information was sent to the printer from my computer.  But the problem is that the printer does not attempt to print it.  No response.

  When I look at the list of available drivers, it shows many different drivers, but don't watch the driver for this printer.  This is why I feel that in some way, the driver has been removed.  No driver... not printing.

  I had a lot of different websites trying to download a driver for this particular printer but can't seem to find one I can download and click 'install' and have the driver appear on the list of different drivers.  I could select it and everything should be OK.

  I'm tired.  Just can not solve this problem.  Hope I have explained this OK so you can understand me.

  Thanks again.

• Color Laserjet Pro CP1025NW: maintaining existing address email eprint

  I bought a new printer and connected web. but I have a new email address how can I change this to my old address, eprint, which is much more memorable.

  @stew2t5

  See: HP - establishment of a HP connected accountt printers >

  Frequently asked questions > can I use a custom printer email address?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• LaserJet Pro 500 M570dn MFP: Print server wireless for LaserJet Pro 500 M570dn MFP

  Hi, use that in a SOHO environment, low volume, a few client machines. Has been wired Ethernet before, but after a move, I need now it wireless (I have 802.11 B/G/N/AC available). I want to keep the functionality of scan-to-network-folder in addition to printing. Should what print server I use? There is such a range of price, and none of them indicate compatibility with the M570dn I see.

  Thanks in advance for any help!

  Can try for Ethenet power adapters.   Pretty cheap.

  https://www.Amazon.com/s/ref=nb_sb_noss_2?URL=search-alias%3Daps&field-keywords=Powerline+adapters

• iPhone/iPad print several copies on LaserJet Pro M1217nfw after upgrading firmware

  Life was good - could print famously well from any iPad or iPhone at home... then I saw the firware update this active ePrint and I've updated so I was able to print to the print House of my laptop on the road. Do not know why, never really need before - but alas, I digress... The problem is that eth firmware update airprint sinc is no longer the functiosn correctly as I get continued to copies of the same print jobs - again and again - unless, after the first print job, I double click on the button "home" NFB iPad to make upi the print queue manager and press Cancel. It seems that the iPad/iPhone does not receive a complete message from the print job from the printer (?) and it continues to send print jobs.

  Anyone else having this problem or have any ideas on how to fix?

  Kind regards

  J.

  Good news for all,

  There's a new firmware update available now for m1217 series that solves this problem of airprint, that you all see. It is also available for windows, OSX no only. It is also a NEW version of the firmware, not the downgrade option available on osx only.

  Thank you all for your patience on this issue and the help of AlwaysNeon looking into this issue.

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?

• LaserJet Pro M402n: Cannot print on LaserJet Pro M402n on port TCP/IP for Windows 10

  I'll put up a new workstation Windows 10. It is brand new with all updates applied. The printer gives me fits. I tried to install as myself (with administrator privileges), 'run as administrator' and logged in as a local administrator and I got the same results each time. I used 'install' and 'non-installateur' version of the most recent drivers.

  The printer is a HP LaserJet Pro M402n. I'm installing a Standard TCP/IP Port. I can ping the printer. I can get on the printers web interface. Likewise, the installation program detects the printer and gives no error. But when the installation is complete, and I try to print a test page, nothing happens.

  The same printer is configured the same on my old Windows 7 workstation which is still on my desktop and connected by the same switch and on the same subnet as the new work center. It prints very well.

  Any ideas to get this to work?

  Got, it works. It had to be that something gimped upward in the initial installation of Windows. I've reconfigured on the PC and was able to get the printer to work first time.

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP LaserJet Pro M475: Print Duplex when not intended

  I have a problem printing to my HP LaserJet Pro M475DW. While the duplex printing works well, there is one thing that I do deal with. If I have an "even number paged document" everything is good. If there are an odd number of pages AND I want to print multiple copies, each blank page is printed. For example, 10 copies of a single doc page translates into 5 printed pages duplex with a copy of each side of the page. 2 copies printed on a 3 results of document from page to page 1 of the second copy being printed on side 2 of the second page of copy one. I've seen this with Windows 7 PRO 64-bit, Win10, 64-bit. The M475DW is wireless printing, but an access point. Essentially, each blank page is printed on weather or not, it is part of the same document if multiple copies are selected. If I want 10 copies of a doc simple face, I need to print 10 - single prints, one at a time.

  Symptoms suggest that the printer driver is probably at fault by not properly inserting commands to eject the last sheet of copy before starting on the first page of the next copy.

  'Capture' a sample (sanitized data) print file (using the "print to a file" option in the print dialog) and analysis the file resulting .prn should comply or not this is the case.

  You can perform your analysis using the PRN file analysis tool in paraphernalia PCL app, available via http://www.pclparaphernalia.eu

  If the driver is at fault, then you will need to check whether or not another pilot is available/appropriate.

  If the driver does not seem to be at fault, this probably means a fault of printer firmware; Verify that your printer has the latest version of installed firmware.

• LaserJet P2055X: Laserjet printing on the page lines

  When we print of this Laserjet P2055X we almost get ghost text down both sides of the paper (scan picture below). We cleaned the paper path and the roll it seems now that something will have to be replaced. Can someone tell me what is at fault, so I can get the part? Thank you.

  

  Make what is called a test of half.  Put a sheet of paper on the manual fold down tray on the front and open the drawer of the cassette.  Now print a configuration page from the menu information and when the rear edge of the paper between the printer, quickly open the toner door to stop printing.  Remove the toner cartridge and look at the picture below.  If the fault is present, the question is the toner cartridge and nothing else.  If the defect is not present, the fuser unit teflon sleeve has problems and the fuser unit will need to be replaced.  I hope this helps.

• Download driver driver page for HP LaserJet Pro M201n hp support does not

  Met the error after downloading printer driver for HP LaserJet Pro M201n for Windows 7 on the official support of the HP page: the requested URL /pub/softlib/software12/COL55789/bi-134296-2/LJ_Pro_M201-M202_Full_Solution_14101-a.exe was not found on this server.

  What is c?

  Hi @ghforoiu,

  I see by your post that does not have the driver downloaded. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I met the same problem using Firefox. I tried to use Google Chrome and was able to download the drivers successfully. Please give it a try.

  If there is anything else I can help you, let me know. Thank you.