Printing after DC update problem

Similar Questions

• LaserJet 3050 stopped printing after last update 1st OCT 14

  LaserJet 3050 stopped printing after last update 1st OCT 14.

  Work status displays "Printing" but watch then "Waiting for printer to become available" and prints ever.

  Tried the usual power out voltage/power on both computers & printer.

  iMac with OS 10.9.5

  Thanks for any help.

  Darrell

  P.S. This thread has been moved to printers - LaserJet Macintosh compatible products. Forum Moderator - HP

  Printer started working today.

  I deleted my printers HP3050, removed cable printer, stop computer and printer.

  restarted printer and computer, reinstalled cable and now the printer works normally.

• Windows Vista x 86, and Windows 7, losing by default settings of the printer after install updates day or end of remote session.

  We have been troubleshooting this issue for a while and we didn't have a patch even if it's a known issue.  When a workstation is set up as a network printer, even if the default settings of Windows (xps document writer) has been removed, the workstation will lose the default settings of the printer after that remote desktop sessions or windows updates have been installed.

  We tried MS FixIT and a registry mod that changes the order of the printers without success.

  We are hoping that there is a fix available before finalize us our Windows 7 image for deployment.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows]
  "DebugOptions" = "2048".
  'The documents '=' '
  "DosPrint' = 'no '.
  "Load"=""
  "NetMessage' = 'no '.
  'NullPort' = 'None '.
  "Programs"="com exe pif bat cmd.
  "device"="no printer name1, winspool, Ne01:

  In our reg mod, we have changed the position of the device at the same time Ne00 and Ne01 without having an effect on the loss of the default printer.  The mod set the default printer, but the settings do not stick.

  I hope there is a fix for this, in addition to a logon script, because our users are on several remote sites.

  ISA1 MCSE

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please post your question in the TechNet forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Magic mouse after Sierra update problems

  Hello

  Are there other people who have problems with their magic mouse in Photoshop and Illustrator after the update of the Sierra?

  It seems that my mouse has become more sensitive waaaayy.

  It makes it nearly impossible to zoom with precision and to move objects while now shift.

  
  This was not the case with El Capitan.

  I checked my settings but nothing weird here.

  Just installed the latest Macos update and Adobe apps are finally working properly!

• Problems with printer after windows update on Vista

  I am running Vista Home premium 32-bit with SP1 and have an Epson SX215 printer. I have Noton antivirus installed.

  My printer will not respond after installation of recent updates. Remiain of items in the queue for printing and the caanot be deleted. I tried Mr. Fixit for printer problems, but it just crashes evenn after leaving 2 hours to run! I tried the system restore, but I just get a message saying "unknown error found no changes."

  I can solve the problem by resetting the PC to the settings to factory, but when I load these recent windows updates again that the problem comes back.

  Help, please!

  Hello

  What updates caused the problem to occur?

  Look for updates in the update history.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  I suggest that you realize the following methods and check if they help to solve the problem.

  Method 1:

  (a) click Start, go to control panel

  (b) select system and Maintenance

  (c) select administrative tools

  (d) double click on Services

  (e) in the services list, scroll down until you find one called "print spooler".

  (f) make a right clic on "Print spooler" and "restart".

  (g) "suppression" of work will be lost and all work queued in your queue will print.

  Method 2:

  I would completely uninstall and reinstall Epson SX215 printer driver package.
   
  a. open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  b. right-click on the printer you want to remove, click on remove the device and then click Yes.

  If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.

  Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. now, reinstall the printer . Note: Valid link also for Windows Vista.

  Method 3:

  If the above didn't help, restore settings PC and install the updates one by one and refrain from installing the update (although not recommended) which is the origin of the problem.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problems with printer after windows updates 14th Dec2011

  December 14, 2011, downloaded the windows updates now, I don't see my network printer. I have a mac, a computer laptop xp pro and a win7 pro, mac workstation still sees the printer and it works. Computer laptop xp can't find any, work stations can be found, but it will not print correctly. The printer is a laserjet 1022n, it has the latest firmware and two windows machines have drivers elatest th. Help!

  Hello

  ·         Your computer is on a domain network?

  Follow the form as follows article and check if that helps.

   

  How to use Windows XP to share a printer with other people on your network

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  See also:

  Cannot print to a network in Microsoft Windows shared printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02030510&tmp_task=solveCategory&cc=us&DLC=en&JumpID=reg_R1002_USEN&LC=en&product=439323

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

• HP Laserjet 2840: HP Laserjet 2840-custom color print after Windows update.

  I updated my Windows 8.1 operating system (64-bit) with the provided updates, automatic updates of Windows, about two weeks ago.  After that my HP Laserjet 2840 will not print anything in color.  It copy in color, so I know that the printer still works.  Ayone have any ideas as to why this happens, and yes I tried to reinstall or update printer drivers provided on the HP website.  Still does not work and want a solution or I will throw this printer out the window, literally and buy something new that works with 8.1.

  Updated - with the help of the forum search on another HP Color LaserJet-cannot print in color - I used these steps in this post to solve my problems of color printing.  Please keep this forum so valuable to others who have questions and need to find solutions.

• Cannot print on a Brother printer after Windows Update

  We share the same brother MFC-8660DN on a network (Win XP x 4 & Win 2008 Server x 1), everything was fine until yesterday (16/09/10). 2 XP computers cannot print (Status: printing error) just after the recent update of windows installation (windows auto update has been set for each week). When we tried to print to the brother printer, he would be stuck in queue for a minute and a bubble pop up "document cannot be printed." 2 computers work fine otherwise. Everything works normoally and can be printed to another printer like Canon. (PS: I tried to uninstall and reinstall the brother printer driver, but no luck the question of setting)

  On the other hand, the other 2 XP did not have an update, and so they can't always print on the Brother printer. Also, Win 2008 server doing a windows update auto but print very well so.

  Therefore, I believe that the update of windows XP must have something to do with the printing error. Is there a fix or update? Alternatively, we can uninstall the recent windows update (only one?) to solve this problem? I'm not sophisticated OS, do not know what could be uninstalled. Help, please!

  I received a call from a client 2010-Sep-16 that they could no longer print
  on a network printer from any workstation.

  Workstations have Vista Business 32 and have been updated morning of September 16.

  The server is Server2003 & printing it still worked well.

  Printers using IP ports very well for more than 2 years.
  Fix was to use instead of the intellectual property & create ports with the full share name.
  
  The IP address of the printer had not changed AND
  I couldn't always navigate with IE8 (using IP address)
  printer see printer configuration data

  Workstations are Server 2003 domain

  This trick of name full-fledged was how I had to put in place
  Vista Home Premium workstations
  to use network printers in home networks.

  Why Vista Business "updated" settings for Home Premium?
  Is this a permanent 'update '?

  Why no matter what version of VISTA do this?
  Windows 7 has the same problem?

  With Vista Business 32 (short-term)? solution was to change the port to a local port with full sharing of the printer name

  See you soon

• Satellite Pro C50-A-154 - battery after automatic update problems

  Hello world!

  First of all, I must apologize for my bad English, if it is not as good as be... after that, I could start to tell you all what happened to me in the last few weeks...

  I have an a C50-A-154 Toshiba Satellite Pro and I use it for stuff like watching youtube videos, listening to music, and do this kind of thing than a normal user.

  A few weeks ago a Toshiba Tempro Alert remember that there are software updates avaliables to download for my laptop, so I installed them, I normally unplug my battery when I have the power cord plugged in, so I didn't realize after a week after that my battery was not recognized as it should be for my toshiba.

  Initially, windows said that it is fully charged and no need to continue to load, so I unplugged the power cord and the laptop shutted down (with battery connected and therefore be charged to 100%).

  When I plugged it again the power supply cable, windows said that the battery was empty and told them, hip but not load...

  At the same time, a new toshiba update was released, this time was for the bios, if I have that it is probabbly fix the problem with the battery, so I updated the BIOS and windows says that the battery was full charged... I couldn't believe...!

  But the system always goes down when yo unplugg the AC cord, and now battery said once again that it is empty...

  Yesterday was a new update for the Bios, so I give another chance, but nothing has changed... I can't use the battery, and I have no warranty, so I don't know what to do...

  I read a lot of posts on battery of problems lately, in the forums of europe and US forums... maybe it's a software problem? Maybe toshiba boys don't have any idea about this problem?

  Thanks for your replies!

  Ruckmess

  Hello

  I think it might be a software related issue.
  In Device Manager, you will find the battery input compatible Micorsoft ACPI method. It belongs to the Advanced Configuration and Power Interface.

  I recommend you to uninstall the three topics that you might find in the battery area.

  Reboot the laptop. After restarting again, the system should install all devices removed once more.
  Usually, this should help to unravel the question in the case of its just system problem

• Program after the update problems

  Hello, I had a hard time with updates on 7.  The last challenge has been with outlook do not open, even with the system restore.

  I used it to fix outlook, type "run" command > outlook.exe/resetnavpane

  I tried similar things for the desktop gadget for the time that it did not work.

  I have the clock and the calendar, they came back, but the weather went and now I can't open, even with the admin, the Google desktop gadgets Gallery.

  It was after the last automatic update a few days ago.

  Restore does not fix it.

  I need a fix, as I had for outlook.  But I forgot where I found it, I may have searched online and came across it.

  Who knows what other programs do not work I have just not used!

  Why are the updates mess up my system?

  7 came on this machine.  It is a mid-range Acer.

  OK, hope that someone has some wisdom.

  Thank you!!!

  * Title *.
  Updates programs, fixed bug with outlook, now a bug with Google desktop gadgets Gallery and who knows what other programs I tried not to spoil.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. If of Spybot's Tea Timer is enabled, please disable it and leave this option disabled until we're done here. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. now to reset IE8 by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  6. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Ignore the section to APPLY to;] KB971058 access via IE8 32 bit only. Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  7. a last reboot & test. If the problem persists, see if disablingand then enabling the Windows Firewall Comodo Firewall resolves the behavior.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP LaserJet 1018 is no longer prints after security update

  
  

  Looks like you have problems of printer since your last update. I recommend firstly to remove the software and then go to the HP website and re install the direct driver software downloads.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Start computer after the update problem

  I just have an automatic update from Microsoft to settle on my computer and automatically restart to complete the process. Everything seemed fine with the installation to reach 100%, as it has been taken out of windows. However, my computer now not turn back at all! I've had no problem with the computer before.

  The computer is an Evesham axis R6 XT and I am running Vista Home Premium. Is it possible that this update caused a conflict with my material that could prevent the computer from starting completely or is it just a complete cooincidence that the computer died during a restart of the update?

  The computer has power as when I try and turn on the computer, it shows a blue light continuous flashing on the front (not the HD light) but it feeds any upward? Suggestions regarding the problem would be welcome.

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also, once you get in Vista:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with services of automatic startup after Windows Update problem

  These are probably related to many things I tried trying to solve the problem of Windows Update - until I found the answer to Fix It.  That fixed my Windows Update, but now I have these problems.

  I tried to run the bat file that Sohail suggested in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/41f1d01e-e787-479b-83de-c66f40a23a37/
  He ran with errors, so I suspect he undid some things and then they don't get put back.

  Those that I know I need is:
  Windows Audio
  DHCP client

  These two begin very well once the system is in place, but I have to do it manually.  They still claim to be automatic when I view in the Services management tool.

  I also noticed that the following services are set to automatic but have not started either.  Is this a problem?
  Task Scheduler
  TCP/IP Net BIOS Helper
  Windows event log
  TPM Base Services

  So, how do you restart automatically?

  Problem posted in another thread to improved Performance.  Long story short - a repair settled with Vista DVD.   He fixed the problem of services, but the problem of Windows Update is back.

• Connection in R12 after Java update problem

  Hi all

  After upgarding Java on the Application Server for the JDK7, I am not able to go beyond the opening screen of application session oracle in R12 using the web browser IE-8, received with error, below, while I am able to work as usual in the browser web Firefox, also established that some of them are able to access the applications , including forms that are of the smillar system configuration than mine, as OS, version of IE.

  ------------------------

  < PRE > Oracle error 1403: java.sql.SQLException: ORA-01403: no data available ORA-06512: line 1 has been detected in FND_SESSION_MANAGEMENT. CHECK_SESSION. Your session is no longer valid. < / PRE >

  Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. For more details, please see the application log.

  The problem here, I mentioned seems to be the specific system, if that is so I have to make any changes to my system to address this problem? Please suggest.

  Thank you

  Moore

  @Hussein:

  I can login and registration after the implementation of this change.

  Uncheck the option "activate the next generation Java plugin" in the Java Control Panel

  Thank you