Similar Questions

• LaserJet CP1215-printing color out of alignment

  Hello

  We have a laserjet CP1215 color and (I think since the replacement of the black cartridge) print colors out of alignment. It seems that only black ink is out of proportion with the other colors. Have tried various recalibration etc, but nothing has worked so far. I've been advised by our IT support company that it's a hardware problem.

  I was wondering if it was just a case of a questionable cartridge that needs to be changed, but we do not have a spare part for the moment so I didn't spend the money on a new if someone could suggest anything!

  I would be grateful for any help or suggestion.

  Thank you

  Rachel

  Hi John,.

  If you are having print quality problems, calibrate the product.

  1 open the HP Color LaserJet CP1210 Series Toolbox.

   

  Open HP Color LaserJet CP1210 Series Toolbox in one of these ways:

  1. In the Windows system tray, double-click the printer icon ().
  2. On the Start menu, click programs (or all programs in Windows XP), HP, HP Color LaserJet

  2. click the Device Configuration file and then click on the page of print quality .

  3. in the field of the color calibration, click Calibrate to calibrate the product immediately.

• Internet Explorer plays not just... in divs are out of alignment with the other 1 px

  Hi I just finished draft of the boabdesignlandscapes.com.au site and all is good in other browsers, but of course Internet Explorer gives me a time hard and all my divs are 1 px out of alignment.  I've been over and over the code and set explicit and given widths to zero margins and paddings but can't see where the problem lies.

  I would like to reealllly reallly appreciate a look on that before go me crazy!  Thank you.

  Since then I've been able to resolve your problem in a different way. I changed your em to px width.

  Your css files should be involved in all areas:

  #header {}

  margin: 0 auto;

  padding: 0;

  Width: 1038px;

  height: 8th;

  background-color: rgb (17, 17, 17);

  }

  #container {}

  margin: 0 auto;

  Width: 1038px;

  }

  #mainContent {}

  margin: 0;

  padding: 0;

  Width: 638px;

  height: 71.8em;

  float: right;

  }

  #sidebar {}

  Width: 400 PX;

  height: 718px;

  float: left;

  background-color: rgb (109, 109, 21);

  margin: 0;

  padding: 0;

  }

  #footer {}

  margin: 0;

  Padding: 2em 0 0 0;

  Width: 1038px;

  height: 8th;

  background-color: rgb (17, 17, 17);

  margin: 0 auto;

  }

  Some of the css may be not the same as your as I was playing around with it, but it does not work. WHEB using 0 (zero) for padding, margin etc, you do not specify any unit. If the margin: 5px 0 would be 0 at the top and bottom and 5px to the right and to the left.

  Jim

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• Align with the graphic point nearest

  I have a chart xy with several points. The graph is controlled by a mouse press event, when the user clicks on the chart, he draws a red circle at the point of click. My question is how I would get this to align with the closest point?

  
  

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Illustrator aligns with the pixel & changes the path?

  I work with paths are for some reason strange and annoying, snaps to the pixel grid. I have even the 'Snap to Pixel' off and the traces are changed by the Illustrator so they dynamic enters the pixel grid. I've never experienced this before where illustrator actuall moving anchor points where he wants. Here is an example of what is going on (this happens in the raster preview and normal preview):

  Here is a vector path on a grid created to show where the pixels are:

  

  I select the object swap FILLING in the RACE and immediately you can see that illustrator changed the location of the paths:

  

  I share the RACE to FILL and it alters the paths still more!

  

  Here's another example:

  The paths are not clearly aligned with the pixel grid, but illustrator is trying everything possible to make the line of pixels to the top. (This image has "Quick align inside" and is previewing rasterized).

  

  Same thing but pixel not preview. Super weird behavior:

  

  Will there be some sort of setting in the preferences of masters that is causing this behavior? I did this wink on the grid and snap to pixel is turned off and rest nothing will do. Anyone encountered this?

  Thank you!

  I'm assuming that CS5 because you are talking to match the pixel grid. Is this correct?

  Possible bug, but...

  I can easily reproduce this problem with a small graphic and align on grid of pixels. If I disable snap to grid of pixels (in the transformation Panel) the problem disappears.

  Note there must be a very small chart for the question to stand.

  Are you sure you want to align the grid of pixels off?

  If so, you might try trashing your file.

• Is it possible to align with the edge of a STROKE?

  It automaticly sanps in the middle of a stroke s, o cutting for example, you get a line cut in two.

  As far as I know, the only way to align with the edge of a stroke is by describing it with benchmarks commented under tension.

  Of course, you can make a temporary copy of the race using Cmd - F or Cmd - B to keep it in the right place, align on that and then delete the copy.

  In this example the angles of the pink triangles align on the path statement.

  

• Qosmio X 70-A - need help with the recovery image installation

  OK, so I recently bought a new laptop (Qosmio X 70 - A) which came with pre-installed Windows 8.1.
  First thing I did was to make a backup of the system, all good and beautiful image... installed a program for a better partition the HARD drive and the program dirty windows. It would not start (a blue screen appeared with the error 0 x 80070035).

  Searched the web for solutions and managed to repair using a recovery media, but the laptop was moving to slow down, the best thing that I thought was a restore with the system that I've done before image.

  I put the image on a blu - ray player and entered the recovery media, troubleshooting, advanced option, image system restore, choose the blu - ray and he went for one minute after this error appeared 0x8078002c and my HD is completely erased...

  Please help me
  Laptop did not come with any dvd/cd etc.
  I don't know the serial number of Windows (there is no sticker on the laptop with the sticker).

  Generally the recovery image installation should not be problematic.
  A few months ago I ve installed Win8 recovery image on friends laptop U940.
  If I m remembering well, I just choose recovery image installation (out-of-box) and the recovery image has been successfully installed.

  There was no some don't troubleshoot option.
  Start your laptop and press F12 to get into the boot menu. Put recovery media in the optical disc drive, choose the CD/DVD/BD drive in the menu and press ENTER.

  Just follow the on-screen menu and choose recovery image installation (State out-of-box).

• Oracle cloud virtual image, I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud... But could please at least use us dbconsole?

  On oracle cloud virtual, image I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud. But could please at least use us dbconsole?

  
  I tried to start dbconsole, and it did not work:

  [oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  
  

  According to the oracle help doc center - "creating a database on an instance of virtual image service" (http://docs.oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-29290A81-8798-4988-848E-77A1BE0CF08A.htm#GUID-4851560B-D4B6-42...)

  database was created with the option as:

  emConfiguration - NONE - storageType FS

  
  

  I guess we have to manually configure the em console, but when I tried to create it, he told me that "' Dbcontrol repository already exists." "

  When I try to start it, it exports the error

  [Oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  Could someone could give me help with this problem?

  
  

  Thanks Brian. I tried your command, and it works. Now I've encountered another problem, how can I browse the URL?

  I created the access rule for access remote on port 1521 and 1158. but when I try to browse the EM console URL, it does not work. all the configurations that I need to do?

• Video end with the last image

  Hello

  I was wondering how you can end your video with the last image instead of turning to black.

  When I play my video in VLC Player after them have been exported, the video is always seems to go dark at the end instead of just stopping at the last image.

  Thank you!

  The drive works as expected.

  He plays the latest framework that is part of your video.

  When there is no more than the video to play it stops, the image turns black.

• C8180 don't align with the white paper

  Hi just bought a used C8180.  The test print shows empty for forj light scratches white and cyan, and cyan light magenta and magenta. I replaced all cartridges with new ones. I ran numerouse printhead cleaning and self-test of reports. Black print is fine.

  The pictures are horrible.

  Trying to align the printer, it gives the error "use clean white paper." The white paper is 96bright and new.

  I turned the unit on, reinsert the cartridges.

  What else?

  Hello

  The printer uses a colorful light to align the print head. If required (in this case Cyan) color is not printing - the printer cannot complete the alignment. If the printer does not know there is a problem, then he thing you use other than white paper.

  It seems that the printhead of the printer no longer works.

• "Failure of the printer: there is a problem with the printer or ink system" message

  I get printer error message on my printer Officejet 6700 Premium.  I'm on a Mac OSX 10.9.2.

  I have reset the printer and I tried to update the firmware by the instructions, but he tells me that the device is busy and won't.  The printer is out of warranty but was hardly used - less than 200 printed pages - UGH!

  What can I do else?

  Hi Embie2014,

  Thanks for letting me know you are using the HP cartridges No.

  HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridge not HP, or filled HP cartridges. If you use genuine HP, the following cartridges no could not solve your problem of print quality.

  A "cartridge problem," "ink cartridge failure," or "Incompatible cartridge" Error Message appears on the all-in-one.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document explains how to clean the print head.

  Thank you.

• Wireless printer not communicating is not with the computer

  I have a new computer and my first wireless printer a month or two ago.  I had all this work, then all of a sudden the printer stopped working.  The printer seems to be correctly connected to the wireless configuration and the computer is connected, but they do not speak with each other.

  If I submit something to print, it won't be in the queue for the printer.  I can print a page to test the computer printer, but nothing else.  I tried printing HP and doctor Scan and spent several hours trying to figure this out.  Probably I'm missing something that would be obvious to a more experienced user.

  I did uninstall the printer software and install an updated version of online, but which did not help either.

  Any suggestions?

  Ooh! Ooh!  I found it.  I'm embarrassed to admit what she was.  I was looking for articles on google print problems and someone mentioned the dialog box that appears when you print.  Mine has been configured to print in pdf format!  I've never been and was fine print for a month.  Who would have thought.  Duh.

  So, I appreciate all your help, and you led me to the answer.

  Thanks again.