printing continuous paper

Similar Questions

• 7200 printer: photo 7200 printer acts like it is printing, but paper comes out without any ink

  I tried to print photos.  The printer pulls the paper of photo through the machine and acts like it is printing, but paper comes out the same as it began.

  I was unable to print a document, machine not to copy, use genuine hp cartridges, some levels many other low, but non-printing ink.  In fact, I disconnected power to the printer and restarted, it.  Subsequently, he printed as it should.  Thanks for your help.

• Photosmart 7515 prints on paper bond, rather than on photo paper. How to solve this?

  I printed on paper photo on this printer in the past, but I don't remember how and instruction book is no help;

  Go to your printer on your computer preferences.

  1. Start Menu---> devices and printers---> right click on the printer

  Select the appropriate paper type, and then click APPLY.

  It gives you any kind of error message?

• Letter p will print continuously on my hp pavilion dv6?

  My hp pavilion dv6 letter p prints continuous Linda? A technician will replace an element in the keyboard today. I'll let you know if it works. It has already restarted my laptop which didn't help and probably should not be done at all. My laptop is only a little over a year and my warranty is over. I think hp printers work fine, but hp computers could use the help of their own staff of the company.
  
  Bless
  CF & S

  Hi CSandF,

  Let me know what is your model number and your current operating system? Here is a link that will help you find your model.

  Please let me know.

  Thank you.

• OfficeJet 4500 wireless cannot print bold paper for comics cards

  rumblings of the printer and jump but will print normal paper fine - only growls with a stock of Council and stttutters

  OK, please check your Inbox to private message for options to reset, I send you.

• 1315 all in one printer: my 1315 all in one printer shows "paper jam".

  My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

  Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• Nine D110b. Installed the cartridges supplied. Black ink will not print on paper, color OK.

  I just opened and installed the new all-in-one printer of D110b. only the color cartridge is printing on the page.  Using this with an iMac OSX running.  Do you have the utility printer cleaning of the printheads through step 3, but no change.  Audit of the use of ink and black ink is expressed.  But where is it placed?  Please help as soon as POSSIBLE.  Thank you.  (Since this is a new printer, you would think that HP help for free - no luck.)

  I called HP hotline and they get my cartridge black to finally work.  It turns out that the ink inside, since it had been sitting for about a year, has been a bit lazy, and he had to be convinced to enter the tube and print on paper.  Thanks for your suggestions.

• Epson Stylus Photo R2880, tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Hello

  This looks like a good question for the support of Epson.

  Help and Support - Epson America, Inc..:
  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  Concerning

• You are using windows 7, how can I get my Officejet Pro K8600 print on paper 13 x 19?

  I bought a laptop with Windows 7. Now I can't get my Officejet Pro K8600 to print correctly on paper 13 x 19. It prints on paper 13 x 19, but everything is 8.5 x 11 in size. I click on print, click Properties, change the Super B 13 x 19 paper, press ok, watch box paper 13 x 19 with images by filling out the document, I click ok to print and it prints the image 8.5 x 11 in size on paper 13 x 19 rather than fill the paper 13 x 19. I did not have this problem (and still haven't) with my old laptop with XP. It is the operating system or is it a bad setting in the properties? I tried to compare the property settings in both computers, but I can't find any differences. I don't think it's the driver... Please help!

  Hello HW,.

  Try this: go to devices and printers and right click on the of K8600 Officejet Pro and click on printer properties. Go to the Advanced tab and click on the button called Print Processor. Select Winprint. Try another print and see if it works now. If you still see the same question to see if there is an option of scaling in the print dialog in the application you are printing from.

• printer, continuous printing to stop in half way through

  printer, continuous printing to stop in half way through

  Hello

  1 are there any changes or updates made on the computer?

  2. what operating system is installed on the computer?

  3. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to see the link and try to run the troubleshooter.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• printer says paper jam but not cluttered with paper

  printer says paper crowded but not cluttered with paper

  .. .and printer brand and model also.

• Printing on paper 8 x 12 photo

  I am new to this community and relatively new to the use of my Pixma Pro-100.  I just got the impression a lot of pictures of a recent photo in Botswana safari, and I have problems printing on paper 8 x 12.  Because the proportions of some of my photos to the size of 8 x 12 and would look nice in that size, I bought some media Inkpress paper chandelier in size 8 x 12 B & h.  They told me the specifications for this document are already loaded into the printer Pixma Pro-100, so I thought that it would not be a problem.  However, no matter what I've tried so far, I can't have the printer to print on the paper without leaving a border approximately 1/4 "white on one of the short edges.  I tried to resize my picture at exactly 8 x 12 size; in the print (through the Photoshhop items) menu, I selected the correct printing size, 'size' real and then the slider a bit to fill the preview with the photo frame. has tried no border and no - without margins.  The problem seems to be with the selection of the paper size. There is no selection 8 x 12, and the selection of 'custom' won't let me choose the size and instead gives me an error message saying: I put the wrong numbers and he will choose the closest size to you.  So I get this darn unique border!   The only way I could print my photos of 8 x 12 of to lose a big piece of photo paper and print the 8 x 12 in the middle of it and cut.  There MUST be a way.  I don't really like this printer and she gave me great photos to research.  But I want to know if possible to the thing of 8 x 12.   Is there a printer driver or something like that is needed?  I'm not totally computer/printer warned, but I think I could install a new printer driver, if I had to - and if it wouldn't screw up my printer by other means. In the meantime, I'll just go on the waste of paper, I guess.

  Thanks for any advice,

  Mary

  I had a problem getting 8 x 10 to fit on 8.5 "x 11".  I downloaded the Canon Print Studio Pro, in the latest version.  He has contributed to some extent, but what it does is it reduces images to 6.75 x 8.5.  I think I can adjust parameters of borders.  So, check for the latest version of the driver... help!

• I do not remember how to print a paper to a CD image oohl

  I haven't used my Canon Pixma for CD printing for quite awhile and I forgot how print proof on paper first before committing to a disc. Please hep?

  Depending on the printer you use, it should work almost in the same way for both printing on paper or CD.  The only major difference will be support for type and where you insert it into your printer.

  https://www.USA.Canon.com/Internet/portal/us/home/support?tab=manuals

  Use the link above to download the instructions in your printer manual.  I hope this helps.

• How can I get to the screen to insert the DNS settings? Printer continues to fall from the network

  Windows 7

  Photosmart 6520

  How can I get to the screen to insert the DNS settings? Wireless network printer continues to fall.

  The screen to manually set the DNS and IP parameters is in the SAP, or shipped to the printer Web server.  To access this page, it will take the IP address of the printer.  This information is found by pressing the icon on the front of the Photosmart 6520 wireless.

  Once again, we have the IP address, and then they could type this information in the address bar of their favorite browser.

  On another thread, you have mentioned the difficulties getting to the Web integrated printer server.  It is possible that the printer has a valid IP address, but still has no "communication" with the router.  Have you tried to enter the menu of the 6520 wireless and default network selection.  After having done that, then we can re - run the Wireless Setup Wizard in the wireless menu to reconnect the printer to the network.

  With this new valid IP address, you can access SAP of the printer?  In addition, make sure that the printer and the PC are connected to the same network access point.  Let me know how it goes.