Printing cyan color

Similar Questions

• Color Laserjet 4600 printing Cyan (blue) on the face back papers

  We have a Color Laserjet 4600 printer. For a long time, it has been printing cyan on the back of the documents that are printed.

  Recently, I cleaned the front "roller", which is long and looks like a long piece of rubber/plastic black thick.

  It printed fine for a few leaves, then again blue printing on the back of the paper. The front of the book seems perfect, however.

  I also noticed more cyan toner, which is "stuck" on the front "roller" of the printer.

  I went back to take a picture of him, but I couldn't find on the "roller" to show you.

  Here are some photos to show you what I mean:
  http://imgur.com/a/wBYxx

  What can I do to fix this?

  The part number of the kit is Q3668-67925. Very easy to replace. You just remove the screw at the top of both sides and just slide the old one out and put the new. You must first remove the top of the foot. If you have a crazy glue container, the people were able just to glue the broken pieces and put back once the glue has hardened.

• OfficeJet pro 8500. Installe4d new cartridge HP cyan. Do not print this color

  Installed a new HP cartridge twice. preformed cleaning cycles & alignment. Will not print cyan. Worked fine until I changed the cartridges

  There could be little ink clogging one of the ports of the print head. There is a document with steps to help solve the problems of location printing here.

  Make sure you do 3 levels of cleaning print head. If none of the steps of work, then you may need to replace the Cyan/Magenta Printhead or the printer.

  I hope this helps.

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• HP Officejet 5740 all-in-one: HP officejet 5740 not printing cyan

  Hi, I was really like my printer HP 5740. But yesterday, after I've changed the HP 62 tricolor ink cartridge align unsuccessful, print head and printer is not printing cyan, I press clean cartridge several times trying and trying but still the same thing. One color, absent from the Tri color. Today I bought new paper in printer try again, but still no cyan... totally, no idea now.

  Help, please. I need print an important document. Thank you!

  Thank you for your response.  I definitely have the use of the genuine HP cartridges. He bought Hurstville post office.

  Today I already returned it to the exchange of post office for a new tri color ink. I have lost my receipt because I didn't expect that this situation will occur. But the staff is very helpful. I installed new ink and is now ok. I love my printer again now!

  It's a faulty color ink. Personal Post Office said this is the first time, they found the HP ink defective return. I'm not very lucky... I lost a lot of A4 paper to test print again and again.

  Check back here to let people with the same problem know, stop old papers. It could be solved if you exchange your ink. But please bring the defective ink and test print report with you. If you still receive also bring it with you.

• DeskJet D2360: Deskjet 2360 - prints wrong colors, even if the test page seems well

  In 10 (64-bit) Windows, Deskjet D2360 prints the well test page, but the colors aren't any application (documents, photos...). Cyan looks like dark blue. Green also appears dark blue. I just updated the drivers from the HP website, but the behavior remains the same.

  The problem appeared after Windows 10 updates (January 2016 and later versions).

  Print and Scan Doctor couldn't fix it. Help!

  (Suggestion: If your printer prints the test page, why not propose an image file with what the test is supposed to look like.) This is useful especially to confirm colors. If I have a print test and see a few squares of color, how could I know if they are the correct colors?)

  After a long period of frustration, I found the non-professional magic solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/printer-prints-wrong-colors-after-Windows-10-update/TD-p/5242565/highlight/false/page/3

  Print a test page with HP print and Scan doctor. Once the problem is resolved.

• HP OFFICEJET 5740: HP OFFICEJET 5740 WON'T PRINT IN COLOR FROM MY MacBook Pro

  I just bought an installed my HP 5740 earlier this week.  I can't print in color of my MacBook.

  It will be printed in the color of my iPhone 6 however.

  When I print the page 'Print diagnostic quality' print A4 pages with color 4 color blocks that is to say, the black box has 3 columns of black, grey and light grey.  The Cyan box has 3 columns of the dark blue, light blue and medium blue.   The Magenta block has 3 columns of the BlackBerry to the lighter shade of a rose.   The yellow block has 3 columns of the shade darker of yellow in the middle and lighter shade of yellow.

  My older HP printer which was connected by cable always worked fine in color.

  Can help you.

  Thank you

  Allan

  Finally, after several other attempts to download software and and full of reboots to laptop and printer, I was able to print in color.

• LaserJet 1600: problem with printing on color laserjet 1600

  I just replaced all color cartridges, but the left side of the print is faded.  I cleaned it up, and I don a supplies status page.  black and cyan colors print correctly.  yellow - the left third of the color bar is faded to white.  Magenta hardly shows in color at all.

  any suggestions?  Thank you

  Problem running on this series with the Magenta.  Yellow it is possible also, but more than likey you have a bad toner.  See instructions attached on how to fix.  A lot of work but not so hard.  Usually I leave the track of wire black plastic which crosses the upper part as it is a bear to get back up and is not necessary.  A couple of tie wraps will do the trick.

• Print black color with a color of the image page

  If I set up my printer to print in color, it prints black parts with cartridege or black color combination?

  Hi reneincer,

  I understand that you would like to know if the printer uses black ink if you set up to print with the color cartridges.

  There are different to choose print settings.

  High quality grayscale will use less cyan, megenta and yellow (CMY) that say normal printing mode, but will not be a drastic reduction. However, the only feature of black ink slightly reduced the use of the CMJ. This setting produces a composite black.

  The feature of black ink only will limit the use of color for the amount that passes under the black ink to ensure an impression for a long time and the true-black tone that should.

  More economical printing would quickly the project and black ink only.  Grayscale setting uses the color cartridge to print in grayscale, because it offers better quality.  The quality is better with shades of gray, but it uses more ink.

  You will find information in the following article. Use of inkjet printers ink.

  Here is a document on the color management settings.

  I hope it's useful.

• HP Officejet Pro 8600: Printer does not print in color

  I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

  Hi @monitons,

  Welcome to the Forums of HP Support!

  I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

  To determine the cause, I would like to use this document:

  • Fixing poor print quality

  If the problem persists, I suggest you try a new complete set of ink cartridges.

  How many times have you filled out the ink in these cartridges?

  TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Deskjet 3050: Problems with printing in color?

  Hi all, I have problems printing in color. No idea what to do. Here's the problem: I'm trying to print in color and the colors look darker on one page, my colors are fine then saw green to halfway through until its finished. On another page, the colors are ok, but some colors are missing.  I tried the cleaning test, the colors seem to come out ok! Tried to see the ink and the remaining portion. It seems to be more left black and yellow, cyan and magenta. No idea what do then, never had this problem with the printer before. Thanks for any help!

  Looks like you have a cartridge that is short of magenta or default.  This can happen to cartridges that are very old, even if they still have ink or third party cartridges that were not filled out properly.  The steps of troubleshooting in the paper here may help, but I suspect that you need a cool color cartridge.

• Will not print in color from my Mac or iPhoto for HP photosmart D110

  My printer will print only in black and white when I print from my Mac OS X 10.6.4 on my printer.  I uploaded the photos I photo and print only in black and white.  When I put the card directly into the printer, it prints fine color.

  HP website was no help at all with this issue.  All of the suggestions.

  Print a self-test of the front of the printer. It prints color? If this is not the case, there is something wrong with your color cartridge. What version of Mac OS X?

• Photosmart HP 6520 - print in color, not black and white

  I have had this printer for some time and configure options so that it used only the black cartridge unless I put it specifically to do otherwise when I wanted to color.  It worked well and I could switch between black and white and color very easily.  A few weeks ago, the printer started to ignore the options I would set and printed in color.  I double checked the parameters, and the printer is always set up for black and white, but now it completely ignores and still print in color.

  I tried the settings at the time of printing, and that indicates that the image in black and white, it still prints in color.

  I haven't added any software or made any changes to my pc.

  Can someone help me with this, please?

  Hi Lulu and thank you for the reply!

  I suggest to download and run the HP print and Scan doctor.  Once you have run the tool successfully, try again the configuration in black and white.

  Please let me know the results.

• HP 6700 will not print in color

  OFFICEJET 6700 WINDOWS 7 my HP officeject 6700 used to print in color and now only prints in B & w. went forward in the configuration menu, click on the GREY SCALE, but only option is black how do I get it to print in color again. Thank you, Sue

  Hello marrre,
  
  Welcome to the Forums of HP Support!

  Are able to copy in color using the Officejet 6700? If you are able to copy in color the problem may be on the side of the computer.

  You could try printing HP and Dr. Scan, it will look at the software and drivers installed for the printer.

  Let me know to come out.

• CP1515n: CP1515n does not print in color began new update win10

  I have installed the latest updates from WIN10.

  After that, my printer want print in color.

  Button to choose disappeared...

  Even with the update of firmware and drivers for the HP printer, he wanted to work :-(

  Any solution to this problem?

  Yesterday, I deleted once more my printer installed again en all the drivers etc.

  Thus, exactly the same way as previously, guess what... it works again

  Thanks for the info guys!