Printing error: "Spooler subsystem APP has encountered a problem and needs to close."

Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.

Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:

"Subsystem spooler APP has encountered a problem and needs to close."

The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.

I also discovered that the print spooler is never started.

In addition, even when I start the spooler it remains not said during the next time I start up.

Can anyone help? I've been banging my head for two weeks.

Salvation;

Thanks for responding.

My IBM ThinkPad running XP - Pro

My computer is a DELL and running XP-Home Edition

Printer installed on DELL

I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.

Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.

I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.

I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.

Any advice you can give me would be greatly appreciated.

Tags: Windows

Similar Questions

  • Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience.

    Spooler SubSystem App has encountered a problem and needs to close.  We are sorry for the inconvenience.

    Hello

    1. When you get this error message?

    2. that you get this error message when printing?

    3. What is the brand and model of the printer?

    4. don't you make changes to the computer before the show?

    Please provide us with more information on this issue to help you best.

    If you get this error when printing, follow the steps from the link below.

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/810894

  • Spooler Subsystem App has encountered a problem and needs to close

    We cannot print anything on my computer. the message is that the Print Spooler Subsystem App has encountered a problem and needs to close. How to get the print spooler to run and work my printer start?

    Hi Saeed,

    1. were you able to use the printer before without any problem?

    2. did you of recent changes on the system?

    3. What is the brand and model of the printer?

    Method 1:

    You can try to start the Fixit from the following link and check if it helps.

    Problems printing and printing errors

    Method 2:

    You can also read the following article and check if it helps.

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  • In XP randomly receive error message "Windows Explorer has encountered a problem and needs to close"

    I get the error message "Windows Explorer has encountered a problem and needs to close".
    It occurs at any moment while I'll do something on my computer.
    The signature of the error is,
    App name: explorer.exe
    App version: 6.0.2900.5512
    The mod name: unknown
    Mod Version: 0.0.0.0
    Offset: 4ec683bd

    After the error message appears and I click 'send or do not send', everything on the screen refreshes, & I have to reset some programs.

    I am unable to do a system restore to solve the problem because I have no good restore point before this problem occurs. He began to occur initially in Jan 2011 & I can't go to a restore point of return in 2010.

    Can someone please?

    * original title - I get an error message "Windows Explorer has encountered a problem and needs to close". It's a little different from the others I found the message communautaires.*

    Hi Jaaz76


    Method 1:

    You can perform a security analysis and check if there are viruses or malware present. Check out the link below to run the scan and check if this helps-

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

     

    Method 2:

    Also I suggest you perform a SFC scan and check. To Perform a Scan SFC -

    a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

    b. type the following command and press ENTER:

    sfc/scannow

    c. a message indicating that "the system scan will start. Be patient, because the analysis may take some time

    d. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    e. once the scan is finished, close the command prompt window, restart the computer and check.

    Check the link below for further guidance on scan SFC - mentioned
    http://support.Microsoft.com/kb/310747

     

    I hope this helps.

  • Installation of QuickBooks 2012 gives the error "set.up.exe has encountered a problem and needs to close."

    I try to install new software Quickbooks 2012 on the computer that is running Windows XP. The installation will start and get error "set.up.exe has encountered a problem and needs to close." I spoke with Quickbooks technical support on this issue, but they have been unable to solve the problem. I have read several of these posts on this forum about this kind of mistake, but none seem to be directly related to my situation. I plan to try to reload the Windows XP operating system, but unfortunately, the CD is missing. I'd appreciate any help that anyone could have.

    original title: setup.exe error

    Hi Bill Gammon,.

    You can go ahead and try the suggestions and if the problem persists then I you suggest to run the Microsoft Fixit and then try to install Quickbooks 2012.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Let us know if that helps.

  • Spooler subsystem app has encountersd a problem and needs close__

    Spooler subsystem has encountered a problem and needs to close

    Spooler subsystem has encountered a problem and needs to close

    See http://support.microsoft.com/kb/324757

  • At startup, Error Message: dd.exe has encountered a problem and needs to close

    Every time you start the Error Message is: dd.exe has encountered a problem and needs to close. Close.

    "dd" is - in this list.  Looking more far over the line to SD in this list...

    What is the 'command' that launches the application (perhaps to widen the column to see everything) and what is its 'location' (perhaps to widen the column to see everything)?

    (Only for the DD.)

    You could uncheck here, restart and see if it happens again (it will not).

    Then, with the information that I just asked for, there's the real 'location' and remove the 'command' begins with manually to get rid of it permanently.

  • When restarting Thinkpad T43 running XP Pro, error "Thinkpad Fn + F5 has encountered a problem and needs to close."

    I'm using a Thinkpad T43 with XP Pro. When you're cycling on it always shows a message of "Thinkpad Fn + F5 has encountered a problem and needs to close. We are sorry for the inconvenience. Please tell this problem to Microsoft. "I hit send and continue switch upwards and everything works fine, including the wireless. Is it possible to get rid of this annoying little window on start up? Thanks for any help.

    * original title - Fn + F5 false error message *.

    Hi and thanks for the answer-

    When I woke up this morning it became me to the simple thing instead of all things "a simple" I had tried to do. IBM keyboard shortcut RELOADED drivers and the problem disappeared. Thank you very much for you reply and suggestions.

  • Error message: KBD.exe has encountered a problem and needs to close

    kbd.exe has encountered a problem and the need to close

    kbd.exe has encountered a problem and the need to close

    KBD.exe is part of the driver for your keyboard. Go to the support page and drivers from your computer manufacturer's website. Enter the model number of your computer. Locate the driver for your multimedia keyboard and reinstall.

  • error message "Windows Explorer has encountered a problem and needs to close" on click with the right button in my computer

    I had this problem for awhile now.  After I receive and send the error report my computer is blocked and I have to finish by WTM. I tried to start in safe mode and it was ok there and when I restarted in normal mode it was ok for the rest of the day, but when I put the computer today the problem reappeared. Dr. Watson is also sometimes with an error message.

    I am running XP with MS and updates.

    Would appreciate some advice.

    Chris

    When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

    Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

    Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

    If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

    First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

    Download ShellExView here to see what Explorer extensions you have loaded:

    http://www.NirSoft.NET/utils/shexview.html

    ShellExView does not install anything on your computer, simply of runs and displays.

    After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

    Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

    Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

    You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
    You can Google something like:

    Explorer XP crashing (you must fill in the name of add your suspect on.)

    See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

    I'm not a defender of trial and error, but I can't think of another way to do...

    Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

    If you recognize all the extensions that have been added or recently downloaded, start with these first.

    Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.  In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

    Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '.  You have disabled the last extension would be suspicious.

    You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

    If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

    The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

    I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

    If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

    If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  • "NTVDM. EXE has encountered a problem and needs to close"error after installing the update of security KB2707511

    After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.

    I have a lot of customers running a 16-bit MS-DOS - program that receives the same error.  It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware).  By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.

  • HPSF.exe has encountered a problem and needs to close

    using pavilion hp Elite desktop, windows 7 Edition 150ff Home premium, receive a HPSF error message. EXE has encountered a problem and needs to close. I tried to download it again from the HP website, but I get a message saying "your system does not meet the minimum requirments for this update, update has been cancelled. (1602) my computer has a hard disk of 1 terabite with 8 GB of ram and I have very little installed above with the exception of 4 songs and microsoft office and student that I bought and Norton Internet Security.

    Someone can tell me why I get this message and how do I fix the problem, my office is wired but my printer is wireless, I have high speed internet and I have also a HP Envy 700-019 again at Christmas last year, which has a HD 2 terabite with 12 GB of ram and windows 8, desktop computers are 64-bit. Not used at the same time.

    This message means that the HP Support Assistant had a problem.

    I recommend to uninstall the application from the--> utility Control Panel programs & features and then put it back. You can use the charm of the search and the type of programs & features. Click on the above icon to call the utility.

    You can reinstall from the Recovery Manager.  Invoke the charm of the search and type in recovery and click the icon.

    Find the Recovery Manager from the list of drivers and applications and put a checkmark in the box to the left and then click install in the lower right corner.

  • Problem installing MS LifeCam 2.07-"MsCamSvc.exe has encountered a problem and needs to close."

    Although the WebCam was working before, I had to uninstall the software due to other problems. To re - install the software from the CD, I now get an error message: "MsCamSvc.exe has encountered a problem and needs to close." I updated the new driver on the site of Ms. There is also no yellow or green light on the WebCam after installation and connection to USB port.  I got the WebCam to an electronics store, and they tested the material; This works. Why it will not properly install on my computer?

    Hello

    I suggest try to uninstall and reinstall boot clean and check if it works.

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    You can also check these links:
     
    File of Microsoft LifeCam Readme and troubleshooting information
     
    Troubleshoot failures to find the new LifeCam hardware
     
    Note: He is also involved on your lifecam.
  • SELF-PROTECTION MONITOR HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE. WE ARE SORRY FOR THE INCONVENIENCE

    Original title: Tamper monitor

    I KEEP AN ERROR MESSAGE "TAMPER MONITOR HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE.  WE ARE SORRY FOR THE INCONVENIENCE ".  HE COME EVERY 3 TO 4 MINUTES, IF YOU CLICK SEND ERROR REPORT OR DON'T SEND IT DISAPPEARS, BUT RETURNS.  IF YOU DO NOT CLICK ON FOR A FEW MINUTES, IT FREEZES AND WILL NOT GO OFF THE SCREEN NO MATTER WHAT YOU DO.  HOW CAN I SOLVE THIS PROBLEM...

    Hello

    1. have you installed Norton Security software on your computer?

    Sabotage monitor (tapmon.exe) is associated with a component of Norton called Norton safety Minder. I would ask you to uninstall and reinstall the Norton Security software and check. You can also contact Norton support on this issue.

    Check out the articles below to uninstall and reinstall the programs in Windows XP.
    How to change or remove a program in Windows XP
    http://support.Microsoft.com/kb/307895

    Installation of programs
    http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/installprog.mspx

    Support Norton:
    http://www.Symantec.com/support/index.jsp

    Note:
    It is recommended to install the software of security immediately after the issue is resolved.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Spooler subsystem app has encountered a problem.

    HP Laserjet 1020 printer does not work.  Have used this printer for years.  Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.

    Used Mr. Fixit.   Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,

    OS is XP Home Edition Service Pack 3.

    Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.

    Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

    AntiMailware MalwareBytes
    SUPERAntiSpyware

    Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

    Cleaning of printers

    NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

    A. Clean on print jobs pending

    • Open a command prompt window (start > run > cmd > OK)
    • Type the following in the black command prompt window, and then press ENTER after each line

    net stop spooler
    del/q '% windir%\system32\spool\PRINTERS\*.* '.
    net start spooler
    output

    B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

    A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

    Open a command prompt window (start > run > cmd > OK)

    Type the following in the black command prompt window and press enter

    dependent on the spooler of sc config = RPCSS
    output

    Note that there is no space before the =

    If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

    Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

    Use of SuperAntiSpyWare found two serious problems.  Could cross printer of pending work.  Printer works fine.  Thanks for your reply and advice.

    Best regards

Maybe you are looking for