printing from microsoft word

I use Windows 8 and the HP Officejet 4620 printer all-in-one.  I printed before MS Word wrap, but now I can't.  Any advice?

Thanks, I had already tried who. Since my post I have just reset my router and it is printing again! So far so good!

Tags: HP Printers

Similar Questions

  • HP Deskjet 1512: Cannot print from Microsoft word 2007

    Hello

    I recently bought a HP Deskjet 1512, it scans and copies without any problems, I am able to print images and files of e-mail, but it won't let me print anything from Microsoft Word (2007), I rebooted and reinstalled the software, I ran the hp doctor and nothing works I still can't print There is no error message and it is not in the print queue, it simply nothing if I click the quick print or preview before printing in word.

    Thanks for any help

    Jessy

    Thanks for the help dragon fur.

    Your answer does not solve the problem, but he did something worse either.

    I have it fixed now though it was a security issue blocking MicrosoftOffice to link to all connected devices.

  • Error BCCode: 1000008e and cannot print using Microsoft word or excel

    Original title: I have 2 questions.

    (1) error message (BCCode: 1000008e - BCp1:c000005 - BCP2:BF9472FD - BCP3:AB6A91D4 - BCP4:0000000 - OSVer:5_1_2600 - SP:3_0 - product: 256_1)?

    (2) I have HP LaserJet 6 L printer and it will print the test page put not print other pages to print such as word or Excel.... etc? Note that the test page didn't print that from the printer not your PC

    Hi TurmanTurman,

    1. Did you the latest changes on the computer?
    2. Exactly when you receive the error message? You are able to boot into Windows after the error message?
    3. You are able to print using WordPad or Notepad?
    4. What happens when you try to print using Microsoft word or excel?

    The stop error 0x0000008E occur mainly due to the following:

    • Drive hard damage
    • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
    • Incompatible device driver
    • Incompatible software

    Check out the articles below and try the steps mentioned, check if it helps.

    General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

    http://support.Microsoft.com/kb/945658

    You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

    http://support.Microsoft.com/kb/903251

    I suggest that you see if you can print using WordPad or Notepad on the computer.

    If you are unable to print only when you use the Microsoft office application then I suggest that you post your question in the forums of Microsoft Office.

    http://answers.Microsoft.com/en-us/Office/Forum

  • Can print control panel test pages, but cannot print from applications (Word, WP)

    Original title: can print test of control panel pages, but cannot print from applications (Word, WP) no error no message other than can not find printer.

    Recently upgraded to SSD as boot drive.  everything is working except cannot print from Word, WP or any application (Editor, etc.).  Can print test pages to control panel on each installed printer, and do not appear.  Try to print from Word he pauses and says "cannot find the printer."  Tried reinstalling Word without solving the problem.  I don't know that the problem is Windows 7 related, not printer hardware problem.  Several times reinstalled printer that also does not resolve the issue.  Any ideas?  Anyone?  Anyone?

    Hi Doug,


    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
     

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    1. What is the brand and model of the computer and the printer?
    2. have you made any recent hardware or exchange of software on your computer before the show?
     

     
    Please follow the methods and mark the question below:

    Method 1:


    Step 1:

    Run the Microsoft Fix It from the link below.

    Diagnose and automatically fix problems printing and printer:
    http://support.Microsoft.com/mats/printing_problems/
    Step 2:

    Follow the steps in the link below.

     

    Method 2:

    Follow the steps in the link below.
    Method 3:
    Follow the steps in the link below.
     

    If the problem persists then I suggest to uninstall and reinstall the printer drivers.

     
     
    I hope that the information above helps you.
  • Cannot print from MS Word 2007 P1606dn

    With the help of Windows 7 (64-bit). Just installed my HP laser printer model P1606dn. cannot print from MS Word documents. Reads "problem sending a command to the program". Troubleshooting solutions on the internet all the State spooler problem.

    Not familiar with the technical terms. Really need help, thank you.

    Lenelk

    Hi lenelk,

    This seems to be a problem with Microsoft word.

    What happens if you print from WordPad?

  • I can't print from windows word pad 8

    Hello

    I have a Canon I-Sensys MF8050CN printer. All of a sudden, I can't print from Notepad, Word pad or Microsoft office packages. I can print from the internet and can print the printer test pages.

    Thank you

    I had the same problem. It turned out be the black ink cartridge. Change the color of the font to something else and print something. See if it works.

  • Can't get the page to print from Microsoft Visio. Also will not delete the queue.

    Can't get the page to print from Microsoft Visio. Also will not delete the queue.

    The problem arose when the USB printer to a laptop with Windows 7 on a desktop using Windows XP. The printer is a HP Deskjet D1660.

    Hunting around, I found a solution that had been proposed for someone else's problem. The detachment is shown below.

    Re: Update critical to correct a PC to printer communication problem, washer dot?

  • all-in-one Deskjet 1515: do not print from MS word

    My printer prints not MS word.it prints from all other programs except for ms word. Ive tried everything I could think, suggestions

    Hey @mangee,

    Welcome to the Forums of HP Support!

    I would like to help you today to solve the printing problem of Microsoft Word that you encounter when you try to print from your computer Windows 8.1 for the printer all-in-one HP Deskjet Ink Advantage 1515. Because you are able to print from all programs except one, I don't think that what you feel is a conflict driver on your computer Windows 8.1. To resolve this conflict, can I please have you perform the following steps.

    How to add another driver:

    1. Open your screen to Start by clicking the windows button in the lower left corner of your computer screen or by selecting the "Windows" button in the bottom left of your keyboard to the left of the Ctrl key
    2. In the screen type start "devices and printers
    3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
    4. In the devices and printers folder right click on your HP Deskjet Ink Advantage 1515 and left click on printer properties
    5. Left click on the Advanced tab
    6. Left-click on new driver
    7. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
    8. Select HP as the manufacturer on the left
    9. DeskJet 9800 select the printer on the right. If Deskjet 9800 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 9800.
    10. After selecting Deskjet 9800 hit Next to complete the wizard driver new
    11. Under the printer properties window, select "Apply", but don't hit not OK
    12. Select the general tab
    13. Rename your printer HP Deskjet Ink Advantage 1515 at
    14. Click OK
    15. Finally, right click on your HP Deskjet Ink Advantage 1515 one more time and click on Printing Preferences
    16. Left click on the paper/quality tab
    17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
    18. Press apply and OK

    Now that the other pilot is successfully added to, please try to print the new Word.

    Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

  • Impossible to only print from message WORD get no installed printer

    I have AM UNABLE to PRINT IN WORD - GET MESSAGE "NO PRINTERS INSTALLED" - AM ABLE to PRINT FROM WORDPAD, EXCEL AND INTERNET.  Help!

    In general, you should ask questions related to the word in the Word forum: http://answers.microsoft.com/en-us/office/forum/word

    Before you do so, however, it may help: http://support.microsoft.com/kb/223418 are most likely parts of this article apply to your situation:

    Set a different default printer and set your original as a default printer.

    If you do not have a second printer installed, install the 'generic - text only' default printer and then set your normal printer back to the default value:

    1. Click Start , click Printers and faxes.
    2. Under printing tasks, click Add a printer, and then click Next.
    3. Click local printer attached to this computer, and then click Next.
    4. In the use the following port box, select LPT1: (recommended Printer Port), and then click Next.
    5. In the manufacturers list, click generic.
    6. In the Printers list, click on generic / text-only, and then click Next.
    7. Check the name of the printer, and then click Next.
    8. Click do not share this printer, and then click Next.
    9. Click No when you are prompted with the question whether you want to print a test page, and then click Finish.

    To change the default printer and the new driver, follow these steps:

    1. In the Printers window, click generic / text only printer (or your other existing printer), and then click set as default.
    2. Right-click your original printer and then click set as default.
    3. Try printing again.
  • Quality photo and text to PDF from Microsoft Word

    Hello

    I produce reports for clients in Microsoft Word using a Windows PC, and they include texts and photographs. Before sending it to the client, I print to Adobe PDF in Word.

    When you look at the PDF file using Adobe Acrobat X, text and photographs have always lost sharpness and accuracy compared to the original version of the word.

    Is there a a way to improve it using Acrobat please or is this a word problem?

    Thank you

    Anna

    Hi anna_123,.

    Please convert the Word file in format PDF of Acrobat itself once the changes below.

    Menu-> Preferences Edition-> convert to PDF-> MS Word-> change the settings from-> high quality printing.

    Let me know if there is no change.

    Kind regards
    Nicos

  • HP DeskJet Ink Advantage 1515 prints Via Microsoft Word

    has you issue ever resolved? I have the same problem.

    After the printer for 8-9 months and being only unable to print from Word, Acrobat, Firefox etc., after having the problem in windows 7 and 10, I found a simple solution to work. I decided to publish this so that others can benefit from the solution.

    The 1510 does not support windows 7 and more correctly. Therefore, shortened or the executable file of the program (for example, on the start menu), click Properties > > click on the Compatibility tab > > in the drop compatible menu change the setting to Windows XP service pack 3 > > Apply > > Ok. Restart word / Acrobat etc. Print!

    Note: I am not a representative of HP. It worked for me, maybe it will work for you. No commitment.

  • HP 6520: Cannot print from 2016, Word and PowerPoint 2016 but may leave Excel on HP 6520 2016

    Have charged the current driver... Can print from Excel 2016. But can't go to Word or PowerPoint-2016. Paper goes through but not print.

    Hi @Hopefully5,

    Thanks for getting back to me with this information.

    The first thing I would do is check the software and printer drivers. This can be easily done by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many software issues of print and printer.

    Please let me know if that solves the problem, or if you need assistance.
  • How to transfer text from microsoft word in the body of the email without errors in the form.

    Whenever I try to copy and paste a document in the body of an e-mail (in hotmail) the result is that hotmail changes the formatting of it. Hotmail will add spaces between lines that were not there before. It is very annoying and is wasting my time. To make things even worse, sometimes the formatting appears when I'm composing the mail, but when the mail gets actually to the beneficiary of the formatting is messed up. It makes me hurt people, especially the employers to whom I send my letter of motivation in this way. This happens not only to copy and paste form microsoft word. It happens when I copy Adobe and the internet explore and almost all the other programs out there also. Of more, not only to change the spacing, but this can change the size of the text too. Do you know how I can fix this error?

    Hotmail and other e-mail clients may change the behavior of the Enter key to give two lines instead of one.  If you use SHIFT-ENTER in Word, then he may interpret as a single line.

    But if you are corresponding with people professionally, I would suggest that you get an email address that does not depend directly from Hotmail or other free e-mail services.  You can easily register your own domain name and get email from that or you can subscribe to more reliable services is Hotmail.

    In addition, if you want to continue to use Hotmail, the right forum to address issues of Hotmail is here: www.windowslivehelp.com

    Steve

  • Cannot print from Microsoft Surface.

    Can I print from my Microsoft surface 2 with a HP Deskjet F4180 all in one?

    Hi Andy,.

    You can follow the steps in the link given below to print using Surface 2.

    Print and scan surface

    http://www.Microsoft.com/surface/en-us/support/hardware-and-drivers/print-from-surface

    Feel free to write us if you face any problem.

  • How to print from microsoft reader

    How do you print a document from Microsoft reader. If I try to pint I tells me to set a default value in the control panel but can't find something to do. How I print these documents now is to open in Adobe reader and print it from there. It seems the MS Reader device.

    Hi Brian,.

    Thank you for your message and give us the opportunity to help you.
     
    I understand that you want to print from the Reader app.
    It is possible to print using the application once from the devices option in the bar of charms.
     
    You can use this link to set the default player application to view the .pdf files.
    Refer to the section "to associate any type of file or Protocol with a program" on the article.
     
    Windows player: Frequently asked Questions can be found here.
     
    Feel free to use the forum for any other issue of Windows, you may have.

Maybe you are looking for

  • MacBook Pro 128 GB SSD storage

    What can I expect from the 128 GB ssd storage in terms of size of the OS and Microsoft office installed as well as software, very simple that I need for my daily use. will it be enough, or should I go for the 256 GB. On the other hand is the pro stor

  • iPhone 7 pre-order ask?

    Hello. I just a 1 question... When I put the pre orders online apple.com on seven 9. ghoulish I book with pick up on apple store? cause, I live in an apartment, I don't want delivery option, I want to take on apple store on seven 16, Thank you...

  • Forced to change their password

    Hello! Recently, I had to change my password number 4 dig (those who unlock my phone). I did some research on it and found that it is the exchange of e-mails. but I did not. Should I be worried?

  • M400 cannot output external 20 "widescreen 1680 x 1050

    Hello WE just bought 2 protected M400 and 20 "Wide (1680 x 1050) monitors to go with it. Thr problem is that the current driver provided by Toshiba does not seem to have this resolution. Graphics hardware is perfectly able to manage, because it goes

  • IoWMIOpenBlock failed when starting window is up

    I have to write code for the device driver that is need to interview some SMBios information in order to make some adjustments. I use the IoWMIOpenBlock function to access the WMI and IoWMIQueryAllData class to query the SMBios data. On Windows 7, it