Similar Questions

• LaserJet CP2025: My computer did an update of Windows 10 and now I can't do duplex printing CP2025

  Microsoft today pushed through an update Windows 10. Now I can't do a duplexing printer laserjet CP2025. Any ideas? The drivers that I download do not seem to help.

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Now try printing again.

  Kind regards
  Shlomi

• HP Color LaserJet CP2025 in Windows 7 64 - bit... installed, does not print

  HP Color LaserJet CP2025 / Windows 7 Ultimate 64 bit

  I went through all of the steps outlined on the HP website (has not used the CD of the product, plugged in USB, allow to find the Windows Update driver: the last HP Color LaserJect CP2020 Series PCL6 for 64 - bit indicates in the printer server properties) Windows Fix - it says printer is no problem, only one of the four diagnostic tools/wizards that HP actually provides support this printer (1 out of 4... really!) and only one tool that It is very well... when he's not.

  When I send a job to the HP printer, it does nothing. No job/queue printing is created (the queue is empty... always). So far, a terrible experience... not support for Windows 7 in the basic installation, then any support for this printer HP by HP diagnostic tools. A complete skin... I'm about to go back to Amazon to refund and enter the negative feedback to warn everyone who could expect the support of Windows 7 now and certainly support by HP of the diagnostic tools and of the "wizards" for a real product, HP.

  Someone out there has a similar problem and more important still, a real solution.

  I've tried everything that (before), but I tried again... and not luck. So, I gave up trying with USB and figured out how to use direct Ethernet to my PC. There is no instructions with the printer on it good... seems they are focusing on the use in a LAN environment against a small home/office network. But it works now. Thanks for trying.

• HP Color Laserjet CP2025 does not print the colors in the document

  Original title: print film

  I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

  Hi DirkjeAbma,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3 color printing fails all printing applications?

  You can see the following HP support article and check if it helps to solve the problem:

  HP Color LaserJet CP2020 printer - image quality problems

  You can also read the following article and check:

  How can I check my ink or toner levels?

  Hope this information is useful.

• How can I get the total number of pages printed on my LaserJet 3055?

  I have a nice 1012 LaserJet that is not supported in Windows 7, but there is a solution which is to set up a Vista driver as if the printer is a LaserJet 3055.  It works, even if sometimes I get a printed statement that it does not work, and when that happens I just turn off the printer and turn on again immediately and it is fine.  I would like to know if there is anyway I can get the total number of pages printed at some point, as I could with the LaserJet 1012.

  P.S. This thread was moved from software for Laserjet. -Hp moderator of the Forum

  Please ignore my post on the LaserJet 3055.  With the help of a good soul on another thread of discussion, I was able to install and operate my LaserJet 1012 printer on Windows 7, exactly as it did in XP.  No errors, no slow printing, no problem.  The LaserJet 3055 thing helped initially as a work around, but the message about the bad personality who stopped the printer until you turned off and turned it back was boring.

• HP laserjet CP2025 my printer does not recognize my spooler and I tried to remove and download the new drivers with no result. Help, please

  I had recent work done on my computer, which should not affect my printer, but it did.  My system won't let me download a new driver for my HP Laserjet CP2025. It gives me several spooler errors.  I tried the process to start, Control Panel, administrative tools, Services, and then there is no button print spooler Services click on. So in some way it obviously was wiped out when they saved my computer and installed the new screen. HP site doesn't let me download because it sites that this driver is installed with Windows 7. Any suggestions?

  HP does not include drivers for this model, you will need the driver through windows update

  If you say that the print spooler service is not in service, it can help

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-service-missing/ca883d0c-66dB-4599-A886-b8be2ec1ef5f

• How can I connect my iMac for HP Laserjet CP2025 El captain

  Connection to HP Laserjet CP2025

  Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

  This article should help you to solve the problems of printer on your Mac - Apple Support

• HP color laserjet CP2025: no color since the Win10 update

  My Win10 system updated itself lastnight version 1607 (build 1439.82). Before the CP2025 (network printer) worked well. Since the update, she refuses to print in color.

  (Built-in menu CP2025 printed) demonstration page is fine: full color

  Windows all prints in black and white. Printer properties are:

  HP Universal PCL6 print

  Color: No.<>

  Double-sided: Yes

  Clip: No.

  etc.

  Color usage log shows that all the pages/sides were printed in Mono; only one page (the demo page) is reported as printing color.

  How can I tell the printer which is * can * printing color?

  Don't know if this is relevant for your device / driver, but you may need to inform the driver that the device is compatible color.

  I don't have access to a printer LaserJet CP2025 , so what follows shows the device settings tab in the printer properties dialogue for a local Laserjet 1320n printer (which is set up to print with the latest PCL6 UPD):

  

• HP Color LaserJet CP2025 is listed as offline

  Our HP Color LaserJet CP2025 was purchased in mid-November 2011 and worked well since then. I have set up with a static IP address and nobody had connection problems or printing until yesterday. All of a sudden the printer is listed as offline for everyone. A restart of the printer will sometimes allow a print job, and then back to offline. Any time it's connected via USB, it works like a charm. I uninstalled and reinstalled the driver/printer, I updated the firmware, I ran the utility HP diagnostic print and it says all is well, I have it plugged into the various switches and none of them work. I'm lost and ideas. Any help?

  I'm currently running Vista Ultimate 64-bit, but it did appear as offline on the XP and 7 computers as well.

  I thought about it. I put a static IP address on the printer but no has not store the IP for it on my DHCP server has someone else take the address. As soon as I changed the IP address, it was working fine.

• Driver for hp color laserjet cp2025 windows 7 32-bit

  I just bought a refurbished Dell Optiplex 755 32-bit with Windows 7.   I have a hp color laserjet CP2025.  The icon appears in the devices & printers as indeterminate, unknown and yet no model. appears correctly as CP2025.  It has a USB connection that loads a driver automatically.  I can't print a page of test etc.  After I powered the system in place initially I was able to print a test page but after 200 or so updates, I can't do anything with the printer.

  Hi, I don't think that my printer USB of FYI is supported in the latest version of Windows 7.  TNX., Ray

• Print from TO Laserjet

  Hello

  I am an amateur so please forgive me if this is a silly question. I use Illustrator to design a brochure for my business, and I print on a Laserjet Printer brother. When I print a test page for the machine, it comes out crispy and the text is very clear. When I print from Illustrator, however, the text is a little pixelated, as if it was a little fuzzy. I tried different media and get the same result.

  I think that I export it wrong, but that's my question. I tried to create outlines, brochure pixelation and flattening, as well as the file I print without doing any of the things, but it looks the same. I also made sure the printer output is set to the PPP more high and defined for the specific media. Should I be printing from a different program, or have I missed something in my export file to the printer?

  Any help would be great!

  Thank you

  Pete

  Pete,

  I realize that my printer cannot print to the edge, but what adjustment will maximize the use of the paper and give me the smallest border?

  Everything is decided by the printer (driver)

  Also, is there anything else I can do to maximize print quality? I guess my quesition is, how can I save the file to make sure that my production is neat and clean. I'm printing brochures and leaflets and generally to use Illustrator. There are so many printing options, it's a little confusing for me. At the moment I put the maximum dpi (on the printer dialog box) and I usullay vectorize the text.

  If you have only vector illustrations and save to the PDF format, you can't do much more. No need to text, it can make things worse.

• Install a printer LPT1 HP LaserJet 4 L printer USB port in Windows 7

  Before this "incident", I was able to print from my HP LaserJet 4 L (LPT1 to USB) printer.  I still have the correct driver.

  I was forced to do a clean install of Windows 7 Ultimate and lost the ability to print from my LaserJet.  Windows only allows you to install it as a USB printer, but stop there in recognition.  I need to go beyond that point.

  It was working before and I know it can work again.  I just need help to get there.

  Hello

  I realize has the inconvenience that you are experiencing with the impression. I will certainly help you to question.

  Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  I suggest you check the steps mentioned below:

  Method 1:

  Run Troubleshooter printer and check if this can help:

  Open the printer Troubleshooter

  Method 2:

  Restart the Printer Spooler service and check if that helps.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform these steps.

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2:

  See the link below and check if it helps:

  Diagnose and automatically fix problems printing and printer

  For more information, you can also check out the link below:

  Solve printer problems

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  Hello DavePerdue,

  Thank you for your message.  Click HERE for your driver from the HP website.  It seems that it just took some time to get the driver online and available for download.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• HP Color LaserJet CP2025dn UPD: Hp color laserjet cp2025 goes into cleaning/calibration in the middle of print job.

  HP Color LaserJet CP2025dn will be printing and stop suddenly and get into the routine cleaning or a calibration for no reason apparent.  This will be the last 5-10 minutes and then resume the print job.  It was produced for each 2-3 pages it prints.  I provide support for a medium-sized company, we are a print HP shop all, we use

  HP Color LaserJet CP2025dn UPD PCL 6. can someone help me solve this problem please.

  Thank you

  You must make changes by using the SAP or box below to tools:

  * Do not change/modify all settings for printer drivers. Let the printer with the default drivers.

  In the System tab and the management of the paper:
  Default paper size: letter or A4 size
  By default paper Type: plain
  Manual feed: Off
  Tray 1 size: any size
  Tray 1 Type: All types
  Tray 2 size: A4 or letter
  Tray 2 type: heavy 111-130g
  Size tray 3: A4 or letter
  Type tray 3: heavy 111-130g

  In document manipulation:
  Select specify time and Action.
  Paper at a time: 0 seconds
  Paper action: substitute

  In the tab system and print quality:
  Calibration of market: 60 Minutes
  The calibration setting: 168 hours