Printing labels with HP and Mac laptop

Similar Questions

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Print labels on DVDs and CDs using disks light scribe

  I recently bought a hard drive 750 GB of HP DV 7 QuadCore with 8 GB of RAM and a blue Ray player. I was wondering if I would be able to use disks light scribe to burn labels onto CDs and DVDs using my blue Ray player, since it is also a super multi drive. Or I'm wrong because I have come to understand that HP which was pretty much standard on their laptop computers and other computers because they are mainly manufacturers of disc light scribe. Please help me this is my first HP computer. Thank you!!

  Hello

  DV7 is a series of several models of laptops. What is yours, but since id light scrib not very popular now so your machine may or may not have it. Again, you must check the specifications of your machine and the quick way to check is his model. Here's how:

  http://support.HP.com/us-en/document/c00033108

  Kind regards.

• printer labels ZEBRA GX420T and Windows 7

  Need serious help!

  We have a Zebra GX420T label printer that runs on a computer running Windows XP with IE8, installed a printer GX420t printer with the latest drivers from the Zebra EPL and shared on the same USB port of the printer generic/text printer, this example displays the barcode labels.

  Then when connect us everything on a new Windows 7, with IE9, computer the same installer does not work, try the generic/text only, unique zebra GX420t printer and the credits and the combination pilot EPL and combined with generic/text and GX420T installation, still can't make it work. It prints a bit of code to bars and text but completely false and partial.

  Printed the barcode on a regular printer to two computers, and it shows that all the command line the exactly the same for both computers.

  Anyone any suggestions?

  Hi Falcontech,

  I see that you have problems with the printer when connected to a windows computer 7. I'll help you with this problem.

  1. What is the brand and model of the computer windows 7?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the printer connected to a domain network?

  I suggest you try to run the printer Troubleshooter and check.
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Please see these articles also.

  Install a printer: http://windows.microsoft.com/is-IS/windows7/Install-a-printer

  Printing to the correct printer: http://windows.microsoft.com/en-US/windows7/Printing-to-the-correct-printer

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Print a test page: http://windows.microsoft.com/en-US/windows7/Print-a-test-page

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Printing labels with El Capitan using multiple addresses

  Printing Contacts address labels, a label is printed for each address listed for each person, for example, home and work.

  It is possible to select default address by using edit > edit Distribution list, however, this does not preclude other addresses used to produce additional labels. This didn't happen with Yosemite, so it seems to be a bug in El Capitan. Does anyone have a solution for this?

  I can't check Yosemite but with Lion, 10.7.5, all addresses in a contact card to print so that the problem has been around for a while.  Report the problem to Apple via http://www.apple.com/feedback/macosx.html

  

• How can I print on my printer Brothers with a Sony Mini Laptop made in China?

  Information about the printer

  Model: Brothers MFC - 210 c

  Features: USB cable, not without wire, scanner, copier and printer connection

  Computer Sony laptop information

  Model: Sony Notebook or Netbook PCG - 31311L

  Characteristics: Output USB cable, wireless, DVD/CD player, Arcsoft WebCam Companion 4 monitoring mode, exit HDMI, etc.

  Hello

  Check with the support of brother, their documentation online and drivers. OEM brother is responsible
  for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Brother - MFC - 201
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC210C

  Brother - Download graphics driver
  http://www.brother-USA.com/LP/windows7compatibility.aspx

  If this does not help, then you should contact the Support of brother.

  Brother - Support
  http://www.brother-USA.com/support/

  ===============================

  You may also contact the Sony Support.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Photosmart HP 5510: print/label with a hp Photosmart 5510 all-in-one

  I would like to label printing on dvd blank that I recorded, my question is: can I print on DVDs with this printer model?

  Hello

  Unfortunately not, this printer does not support printing directly printable CD / DVD.

  Kind regards.

• Best way to generate a PWM for a stint with LabView2010 and a laptop

  Hello

  as mentioned in the title, I'm looking for the best way to generate a PWM signal to a relay. I want to use a laptop computer and the LabView2010 for she. I have read through several topics, but after a time that he just got more confused. For example the NI USB-6008 OEM case seems to be a solutiion at low prices, but I don't know if I can use for the generation of PWM signals like this thread says is not possible:

  http://forums.NI.com/T5/Multifunction-DAQ/using-PWM-on-NI-6008/m-p/231860/highlight/true#M13339

  But then again this thread right here makes it seem as if it was doable:

  http://forums.NI.com/T5/Digital-I-O/generating-a-PWM-using-USB-6008/m-p/421654/highlight/true#M5527

  Once again in abbreviated form.

  What I need:

  -the best way to generate a PWM signal to control a relay

  What I have so far:

  -LabView2010

  -Laptop

  If possible, it would be good to have two channels for two separate signals, but it is more low importance right now.

  Hey Kambra,.

  The first thread you mention is correct, you can't make output PWM in any deterministic mode with a 6008. The 6008 is strictly software timed, which means that each digital writing that is done in the unit must go through the operating system and down to the device. And there is a lot of jitter of the involved BONE. The second article you mention says the same thing. They emphasized that they could reduce the jitter of some, but still can not remove it entirely. In the second thread, they mention using a M-series USB device do output PWM deterministic (timed material).

  The compromise really down to your application and its requirements. If your application to control the relay requires no determinism, then you can use the 6008. If you need precise control over the relay, try the USB M series.

• Problems running Setup.app with e4200v2 and Mac network

  I bought a router e4200v2 about a year, but somehow, it got lost in my computer room and I don't a not localize until quite recently, just after I bought a new iMac running Yosemite. The new iMacs don't have an optical drive, so I downloaded the Setup.app since the support site of Linksys without problem.

  However, when I run the Setup.app, he starts a Setup Smart Wi - fi but stalls when it comes to about 25% of fact, with a message "could not find your router." I called Linksys, and even if this isn't their period of free support they gave me a free call since I'd just take the machine out of the box.

  We couldn't get the Setup.app to work, so they talked me through a manual installation. I can now access the net of my Wired iMac or any of the various devices wireless around the House (telephone, laptop, etc.).

  BUT it was only after I hung up I have realzed that the different functions available from the diddn t Smart Wifi configuration (for example, guest access) appear to be available.

  I don't want to pay for a support call, but it's really irritating. The Setup.app still does not work, and I see no way to not get LLA.

  Can anyone suggest a solution? Am I missing something simple?

  Thank you.

  I do not recommend the use of the software to configure the router in your case.

  On the contrary, to connect to the router and use the link below to access and configure.

  http://192.168.1.1

  Default user name: admin or empty

  Default password: admin

• BlackBerry Z10 mobile internet tethering with Z10 and my laptop?

  How can I use my Z10 as modem wireless for my laptop. The feature is part of the BB desktop but I do not see the link for BB.

  Thanks Brian

  You can activate the hotspot and connect your PC wireless:

  HotSpot/connections network/configuration (note that WIFI will go off when your enable hotspot)

  (I tried yesterday, painless)

  OR

  Select tehering, then use a USB connection or bluetooth:

  connections/network/modem Setup

  (used only with my Playbook tethered bluetooth)

  Some vendors may require for hot spot or tethering so I guess that some suppliers may have this disabled in their locked phones.

• Connection printer square with Hotspot and Airport Extreme

  Hello

  My family has a joint small pizza and I'm looking to switch our POS system instead. We do not have WiFi, so I was wondering if there is a work around to use the personal hotspot feature, set the AXE to "Join a wireless network" and then connect the printer to the back of the AXE to print receipts and also to use the cash register. This is the kit of POS of the place...

  https://squareup.com/shop/bar-restaurant-iPad-mini

  Maybe get WiFi would be the best solution, but I just wanted to see if this is possible. I have connected the AXE to the personal hotspot, but can not get the printer to be visible by the Setup program in the dashboard square app.

  Any suggestion is appreciated.

  Thank you!

  Your link does not work for me.

  You should be aware that Apple has removed 'join a wireless network' option... it no longer works in all utilities V6 later.

  Even if you use later hardware will not work...

  It works on older when equipment... It has an unpleasant effect...

  The airport becomes a silent client on the network... the ethernet ports have been disabled... the only access was wireless.

  I have connected the AXE to the personal hotspot, but can not get the printer to be visible by the Setup program in the dashboard square app.

  Nothing is plugged in by ethernet will work in this configuration. (USB might work if.)

  Apple authorizes the express be used as a wireless bridge. It is called client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

  However, you can buy any other brand wireless bridge... There is no reason in this situation to buy apple products.

• Can I delete. TemporaryItems and .apdisk? (Sync OneDrive with iOS and Mac, sometimes with Win8.1)

  Hello

  When I look in the root of my file OneDrive structure, it looks like this:

  

  . TemporaryItems is empty, the .apdisk file looks like this:

  

  Can I delete. TemporaryItems and .apdisk or he will destroy the synchronization mechanism?

  Philipp BR

  Hi Philip,

  Please write us with the following details.

  You see these files even if you connect to your computer with Windows 8.1?

  You can go ahead a remove files that you mentioned if you don't need them.

  Open Internet Explorer In-private mode to check if you still see these files. When you start Private Browsing, Internet Explorer opens a new browser window. The protection that offers Private Browsing is in effect as long as you're using this window.  When you start InPrivate browsing, Internet Explorer opens a new browser window. The InPrivate browsing protection is in effect as long as you're using this window.

  To open Internet Explorer in session In-private open Internet Explorer and then press Ctrl Key + key Shift + P together.

  Let us know the status of the issue. We will help you.

• widowxp with window7 and mac

  Currently, I use Mac + wimdowxp the two in my computor apple. All the other computor to my office have window xp. Computor all work with Lan.

  Now if I have installed window 7, will all the other computor om Lan will support?

  How to install Windows 7 with Mac system?

  Yes, the local network should work.

  Follow this link: -.

  http://www.digitaltrends.com/computing/how-to-install-Windows-7-on-an-iMac/

• Can a printer works with cable and wireless to two computers?

  I have a HP c309g printer that is connected to a Dell Inspiron computer.  I recently bought a HP laptop.  Is it possible that I can access the printer time Wired for the Dell wireless laptop?  Thanks for your help.

  Well Yes, connect to your wireless network.  From the front of the printer: Setup > network > network Wirleess assistant.

  Now that it is connected to your network, run the HP software on each computer, choose the type of installation 'Network' when asked.

• Adobe Creative Cloud for teams works with PC and Mac?

  I am interested in buying Adobe Creative Cloud for 3 people in my work. 2 use of the PC and 1 uses a Mac. Creative Cloud still work?

  Yes.