printing messages iPhone5 for printer HP Officejet Pro 8600 Plus

Similar Questions

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Change the default print for all printing on OfficeJet Pro 8600 Plus

  OfficeJet Pro 8600 more

  10.8.3 OS iMac

  I want to change the value print factory set in the default print setting. I want the documents I send to the printer via AirPrint to print in black and white, not color. But the 8600 by default is always color. Sometimes, I am able to change this setting for individual tasks, but sometimes I can't. I wish that the default to be always in black and white. Is this possible?

  The steps above refer only to the Mac, indeed.

  AirPrint provides all color configurations, but only allow printing in color... all available Airprint parameters are listed in the What are the printing options are available? section below:

  http://support.HP.com/us-en/document/c02623193

  You can install the HP ePrint app and print through it, like black and white, know that color options are available for the types of documents only (PDF, TXT, MS Office files, Web sites or email), but not for the types of photo files:

  http://support.HP.com/us-en/document/c01923321

  Shlomi

• OfficeJet Pro 8600 Plus: now really can not print from Officejet Pro 8600 Plus

  It is my second attempt to get help.  First aid made it worse.  I had been unable to print from my printer wireless to my MacBook Pro, iPad, or iPhone.  After 20 hours I managed to do print from a cable (it sees my network but none of my devices can see).  So I posted here asking for help and was told to uninstall the software, repair disk permissions, and then reinstall the software.  But when I downloaded the new software that my computer would not install it because it says it's for Mac system 10.7 or less and I 10.10.  So now I can't print anything at all.  I need this job.  Please help me to fix it for real.  I can't take this more.

  In fact, HP support did not help at all. I finally fixed it myself after a lot of trial and error. The answer was that the printer software was incompatible with the software on my Mac. I removed Rowmote and it started working again. Weird, Rowmote had not been a problem before, but it can be updated. I was told there was new software of the printer of February, but when I went to the driver page with the link that the person a condition he had as the old one. So if he is really a software it should be provided to users. Thank you, they were attentive, though, and I received several phone calls.

• Printer HP Officejet Pro 8600 Plus: notice I have paper

  The paper is in their but he does not notice.

  Hi @Printer666,

  Welcome to the Forums of HP Support! I see your HP Officejet 8600 more does not recognize the paper in the tray. Do you get any error messages? I see you are using Windows 10, did this happen after having upgraded to Win 10, or was it a problem before?

  "I would like to you to start troubleshooting here: a ' paper ' or 'Stalled engine Pick' displays

  What are the results?

  I'll watch for your reply.

  Thank you

• All-in-one printer, HP Officejet Pro 8600 Plus will not print the image in the logo of the company

  I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.

  Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.

  Any suggestions?

  Thank you for responding!

  It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.

  This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.

  I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• Photo printing is blurred: HP Officejet Pro 8600 Plus

  Hello

  Recently I bought printer HP Officejet Pro 8600 Plus and I have no complaint about normal printing.

  Yesterday I bought HP Everyday Photo paper glossy and took some Photo impressions. to my surprise, I see that there are a lot of blur and a large part of the ink is taken on the photo.

  This printer really print photo printing? or I'm doing something wrong

  Output picture is very blurry, a large part of the cartridge from the printer and the ic a sensation by using ink on my fingers

  can someone help me here

  Thank you

  Load the print paper down in the input tray side.

  Many papers have print sides and not printable as paper photo and other special media.

• I need a printer hp officejet pro 8600 for win2000 driver

  Someone in the world has a print driver that works with a printer HP Officejet Pro 8600?

  The Officejet Pro 8600 printer does not support Windows 2000.  I'm sorry.

  However, there may be a workaround solution.  To clarify, I don't have a Windows 2000 system to test this with, and it can take a series of changes for the following steps to work with Windows 2000.  You may need to find the equivalent Windows 2000 for this process steps/formulation as it was done using Windows 7 (the process must be the same).

  It sounds weird, but the Deskjet 990c driver will work for the Officejet Pro 8600, and there's a Windows 2000 driver that is available for download.  However, Windows Update already has this driver and it's easier to use it instead to extract the executable driver and ending.

  Essentially, the printer must be added manually using the Deskjet 990c printer driver.  There may be other resources out there, but I found none on the HP site for the use of this driver instead of the Oifficejet 8600 driver. This will give you only the printing features and nothing else. In addition, there may be problems printing since this isn't an official driver for Windows 2000 for the 8600 (I have not noticed any problems when I did a few test prints).

  1. go where your printers are listed and select the option to add a printer.

  

  2. Select the option to add a local printer (maybe it's a network printer in Windows 2000).

  

  3. create a new Standard TCP/IP port.

  

  4. Enter the address of the printer in the field IP address Ip or host name.

  

  5. the selection of the pilot window should now be open.  Click Windows update will complete the printer selection screen (may take several minutes using Windows Update).  Select HP for the manufacturer and the printer Deskjet 990c for the printer.

  

  6 the name of the printer. The default value will be the deskjet 990c since it is the driver used, but I recommend to name what the printer is so that we know what it is.

  

  7. the sharing screen appears.  If you share the printer, enter the appropriate information.  Otherwise, click Next.

  

  8. at this stage, the process could be completed.  Print a test page to confirm functionality.

  

• HP Officejet Pro 8600 Plus - Duplex printing problem

  I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

  He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

  Any suggestions?

  Thank you

  Hey there @operationorphan

  I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

  You can try to update the firmware: get the latest Firmware and updates

  If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  See you soon

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• HP Officejet Pro 8600 Plus: problem of print head

  Have had this printer for a couple of years without any problems.  All of a sudden getting the message: printhead appears to be missing, not detected, or incorrectly installed. Lived all the recommended diagnostic checks but still a problem. I got it working the first time but then after a few days print message pops up again. The message won't let me come back to the homescreen on the printer.  I took it by a realignment and the printer prints a test page. If the printhead has been the problem, then I thought that he would not be able to print a test page. Any suggestions?

  Thanks for your support Gemini02.  As well as through the HP recommended diagnostic tests I blush as the printhead to hot water, but still the same message. I also downloaded and reloaded the drivers, but to no avail.  The machine is 3.5 years old and so I came to the conclusion, it exceeded its use by date.  The cost of a new print head is $ 70 while the printer, HP Officejet pro 8600, is now manufactured and was replaced by the Officejet pro 8620 which sold $275 by HP.  HP said that because of the age of the printer, there is no guarantee that a new printhead will not solve the problem.  I then bit the bullet and ordered a new printer.

• Printer icon double label explanation yellow Officejet Pro 8600 Plus, automatic duplex short-term paper.

  OfficeJet Pro 8600 Plus, Auto Duplex paper too short. Runnig Windows 7 on Envy 17 3D t. How can I get rid of this 2nd icon, it came after I reconnected to the laptop on the USB port a day. Don't troubleshoot the icon that has yellow mark next to him. The printer is wonderful it prints beautifully. What I've done is by clicking OK on the normal icon created when the printer was installed when the message appears on short Duplesx Auto paper, I click ok and it prints fine. It bothers me that there is a second icon with a yellow mark on it. I know this isn't like that. The system finds no problem do you the troubleshooting tools. Tells me no problems.  Unless she's storying for me. Thank you

  Blessings to all

  Hello

  To solve the problem with the yellow mark righ - click this device and choose uninstall. Restart the system and this problem should be solved.

  To solve the problem with "Auto Duplex paper too short" Please check the link below:

  using my new printer officejet pro 8600, I get a warning "too short paper for auto-recto-sided".

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!

• my printer hp officejet pro 8600 n9911n series has a "ghost in the machine".

  My printer HP Officejet Pro 8600 Premium position of outgoing fax, and then numbers appear, usually of 9 and 6 randomly.  As soon as it starts, I can't abandon this process without turning off the printer.  My firmware, drivers are all to date. It's maddening! Thank you for the help here!

  Model number: N911n

  Product number: CN577A

  Thank you "Super Dave", just went down to thephone with technical support. We did together a semi hard reset. I hope that this solves the problem!

  See you soon!

  gilmost