Printing of multiple numbers of document/picture on a single page

I have a separate document for each week of the year, each document has a worksheet in it. I would like to print the worksheets in each document, but want to put more than one of them on a page. Is this possible? So far, I can only print each individual worksheet... Thanks for the tips!

Hi pmgw,

I don't know any way to print a table of two separate documents on a single page in a single step. There are several ways to do this using multiple steps.

  1. You can configure individual documents so that the tables you want to place on the printed page even alternate position on their leaves, 1 week at the top, 2 bottom, week 3 on top, etc.
    Two consecutive weeks can then be printed on a single page by printing the first, reinserting the page into the printer using the same orientation *, then print the second.
  2. Open the documents numbers during the two weeks that you want to print.
    In the second, select the table to print. Copy.
    Switch to the first. Click on an empty space on the map. Dough.
    Drag the table glued in position. Print.
    (optional) Select the pasted table and press DELETE.
  3. Open a document of 'Blank canvas' pages.
    Open documents from figures for the two weeks that you want to print.
    Copy and paste the table of each document numbers in the Pages of the document.
    Print.

Notes:

Second printing works - Orientation: the best way to ensure that the document is oriented the same for the two rounds is to place a light pencil mark near the center of the edge of the paper closest to you when it is in the tray. After the first run, replace the paper in the tray with the pencil mark in the same position. U

Table selection: to select an entire table, you can place the mouse pointer on an outer border of the table. When the pointer icon changes to a line crossed by a two-headed arrow, click to select the entire table. Or click the table icon in the sidebar (Numbers ' 09). None of these methods to select a table to move or copy.

Or (once) click any cell in the table, and then press command + A to select all. Use this method to copy the contents of the table. When glued, the result is the same as copy and paste by using the first two methods.

The use of the Pages: the advantage of paste tables into Pages is an easier control of the appearance of the printed page. If you do this often, I would say adding guides to layout of the document Pages indicating where to place both calendars, and then deleting the calendars (leaving the guides) and save the document as a template.

Kind regards

Barry

Tags: iWork

Similar Questions

  • HP 4630, how to print multiple copies of a picture on a single page

    I have a Toshiba laptop with Windows 7 and a HP 4630.  I want to print multiple copies of a picture on a full page.  What HP application need me it, and how I put in place?

    Hi Dore71,

    Welcome to the HP Forums!

    I see you try to print multiple copies of a picture on a full page.

    I recommend you take a look at this web site. Picture printing: frequently asked questions.

    Hope this information helps and have a great day!

  • Ability to print the 2 pictures on a single page?

    Is it possible to print several different (shooting) photos on a single page in the print module.  I can't find anything in the help files for LR3.  I know I can do multiples of the same photo, but I want two different shots on a single page.

    Thanks for your help.

    Paula

    In fact, you can drag as many photos as you can on the model. I put

    a model of 19 shots, one a day

    Pre

    Right panel, choose 'Custom Package' and drag your photos from the

    Filmstrip in the model.

    >

  • Can not find help to put 4 pictures on a single page

    I have looked everywhere and cannot find how to put 4 individual photos on a single page to print all at once.  Help!

    Hello

    Picture Package allows you to place multiple copies of one or more photos on a single page, much as traditional portrait studios. You can choose from various size and placement options to customize your package layout. You can print image of organizing elements packages.

    Select Picture Package in print under "Select print Type" organizing elements dialog box opens and allows you to print the required photo package. For more information about printing to a bunch of elements photo organizer, see print a batch of photo in elements Organizer guide.

    http://help.Adobe.com/en_US/photoshopelements/using/WSB1BFB7FE-86EC-4148-B804-FC5833D52ABB .html #WS287f927bd30d4b1f-5796c0e112e28b07616-7ff6

  • How to download multiple images to d-base through a single page?

    I can upload a single image with a shape to my MySql database without problem.  It sends the name of the file to the database, and then saves the image in an image file.

    But now I want to download multiple images in the same way from the same PHP page.  Each multiple upload must be stored at a single record (the designated user who is connected).  I have a field for each image in the database.

    This can give you a better idea of what the database looks like:

    ,
    Username ID image1 image2image3
    scmeeker5Dotty.jpgHello.jpgKitty.jpg
    jdmeeker7

    So now, I want to download multiple images for each field of the image.  When it works properly, it should send the name of the image file in the appropriate field and then send the image to the folder of the image.  I have tried several ways with no luck at all.

    Anyone have any ideas?

    Thank you!

    I think you'd be better to have two tables in your database. One would be a users table that has all user data, including a userid (the primary key of that table), and the foreign key to another table. The second would be an array of images. You would use the images download table infinite (well, as much as the PB can manage) images. The thing is that each record in the table images would have a foreign key, which would be the user id for the user who has downloaded.

    This way your users would be not limited to three images but could download as much as you want to allow them. The association of the id of the user, which must be unique for each record in the users table (there may be duplicates, it should be your primary key on the users table), the user id in any number of records in the table of images is allowing this work.

    EX:

    The users table

    user_id what L_Name E-mail other_info
    100001 first last [email protected] ...
    100002 What L_Name [email protected] ...

    Table of images

    image_id CBC user_id
    10000000001 /db_imgs/img1.jpg 100001
    10000000002 /db_imgs/img2.jpg 100001
    10000000003 /db_imgs/img3.jpg 100002
    10000000004 /db_imgs/img4.jpg 100001
    10000000005 /db_imgs/img5.jpg 100001
  • HP deskjet3545 all Rhapsody printing: how to print print multiple images on a single page of Tablet Oudong hp printer 3545

    nothing

    Hello

    First, you must first download a third party application that will allow you to create a collage of images into a single image/page. Instagram has an option to do this and also allows an application named Moldiv - if you are looking for collage app on the game store, you will find much more.

    Once you have the collage of pictures on a single page, you can use the HP eprint app to print your page or if your android phone has the plugin installed (and active in the settings) HP Print, you can print it there.

  • HP LaserJet 1300: Print > 1 copies of a document in Windows 10/MS Word 2016

    Hello

    Given that I've migrated to windows 10 I can't print multiple copies of the same document. I use the latest version of the pilot broadcast February 2, 2016. How to solve this problem?

    Thank you

    Zulkafil Abbas.

    I suspect that the following is the case:

    • Your document is a MultiPage document (i.e. not just a single page).
    • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
    • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
    • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that LJ1300 supports one of these.

    You can confirm that the foregoing occurs by:

    • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
    • Then examing initially file resulting .prn (you should be able to open it in Notepad).
    • Most of the file can be unintelligible, but initially will look like the following (note that this example is for LJ 1320):

    If the command SET QTY is there, this confirms that the driver think the printer will make copies.

    If so, check the settings of the device to the printer:

    to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

    If the disk hard printer is set to installed, change to not installed.

    If the Mopier Mode is set to Enabled, change it to disabled.

    Then repeat the tests to see if it makes a difference.

    He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

  • Printing of multiple copies of photos

    Let me my old printer to print multiple copies of the same photo on A4 paper picture so you can maximize the use of photo paper and just choose if you wanted to format Passport x however many, 5 x 7 x 3, etc.   On my current HP printer photosmart 410, I can only print 4 x 6 pictures - he will not even extend to 5 X 7 photo of the photo tray paper size.

    I can now print on A4 who downloaded Irganview (tip of this forum - thank you).  But I cannot print multiple copies of the picture on A4 photo paper or get the printer to recognize the biggest paper in the 4 x 6 photo tray.  I changed the settings of the printer more than once - it makes no difference.  Any help gratefully received!

    Hi Caro03,

    I understand that you want to be able to print multiple photos on one page. Usually this feature is part of a photo program. The HP Photosmart Premium Fax e-all-in-one printer - C410 has the HP Photo Creations software included with the download. Once you have scanned your photo in the program, you should get the option to put as much on one page as you want.

    I hope this information helps, let me know.

    Thank you

  • How to print both sides of a document to MS Word in HP 1020 Plus printer

    Two days before I bought a HP 1020 Laserjet Plus printer. How to print both sides of a document MS Word and Corel Draw document in HP 1020 Plus printer? I tried manual duplex printing by print the odd pages first and then even pages... .it came out OK,... .but whenit comes to continuity Page numbers, it is not properly printed... why? Can anyone highlight on this and give me an instructuion step by step to Duplex print and thus help to create 20 - page or page 30 booklets of document MS word typed document or corel draw... Expecting a quick fix

    Thanks & best regards,

    K Narayanan

    @immo22269

    The laserjet 1020 has only manual duplexing capabilities. Please refer to this document for a full set of instructions.

    Print on both sides of the paper (manual duplex printing)

  • How can I print multiple different .ai files on a single page in Illustrator CS6?

    How can I print multiple different .ai files on a single page in Illustrator CS6? I have all the files organized by organizing Documents > tile all in the grid and I want to print files in this format, so that they can all be seen at the same time when printed on a single page.

    General information, it's that I have 16 drawings of different CAD I converted and edited in illustrator. I do basically a plank-contact with all 16 drawings so that they can be examined on a sheet of paper after printing. Each drawing is in its own unique file but I did not understand how to put everything on one page for printing.

    Try to do with the bridge. You cannot print all document tiled windows.

  • Print module: Picture Package should inlcude the ability to add different pictures of a single printed sheet

    Module printing - currently in LR2 I can print multiple images at the same size of a sheet of grid/Contact Sheet mode or a photo in several sizes for a map mode Picture Package.  I think I should be able to print multiple images in several sizes of a single sheet.

    This issue has been addressed in version 3 Beta.

  • 3510e: unable to print a copy of a document placed on the screen of the printer.

    My 3510 e printer works using my computer & Iphone but I'm unable to print a copy of a document that I placed on the printer screen.

    I solved my problem by installing new ink cartridges.

  • How to print a Word using ActiveX document

    How to print a Word using ActiveX document?

    Can I get a document to open and close. Impossible to find a way to have it printed. I think I looked through and I tried all the possible properties and methods, but I may have missed that I need.

    I would have preferred not to open the document if possible.

    Please point me in the right of ownership. For example?

    Thank you

    Chris


  • Printe all-in-one HP Envy 5660: obtaining a black page when I try to copy a document.

    Tried to copy a document. Obtaining a black page. Print preview displays also a black page. Full black ink cartridge. Tried to unplug the unit. No change. Any suggestions?  Thank you.

    Hey @JaneDeere ,

    The semi Full Reset is a complete programming on your printer reset. It resets everything on your printer, not only the wireless. Unfortunately, this reset is our last resort. Because the issue is still produced the last step would be the printer to service.

    I recommend at this point, contacting the Technical Support queue by phone to explore additional options.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    When you talk with the phone support agent, please notify them of all the steps that we have done and the results of these measures.

    It has been a pleasure to work with you. I wish you good luck going forward with this! :)

  • my printer has stopped printing. The issuance of documents in Quebec and he says the first line is printing, but it is not.

    my printer has stopped printing.  The issuance of documents in Quebec and he says the first line is printing, but it is not.

    Hello

    1. what version of Windows is installed on the computer?

    2. What is the brand and model of the printer?

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Try to run the printer Troubleshooter and check that if it helps, here is the link:
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Method 2:
    Try to run the below fixit and check if this may help:
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    It will be useful.

Maybe you are looking for

  • I get a Script error does not respond on many sites, including in Yahoo mail

    This error almost everytime I open an email from Yahoo mail as well as at many other sites. Most of the time the script that fails is chrome://divxextension/content/script.js:132, although sometimes there are others. I have same Chrome open and I don

  • SPA10 battery and BIOS of the time lost problems

    We have 7 SPA10 laptops in our Department of the University. They are all showing the same problem when they have not been used for a week or more. The error message is: RTC battery is low or CMOS checksum is inconsistent.Press the F1 key to set Date

  • username

    Hello. Please you can team tell me how can I change my username? Thank you:

  • Expect a result of zero when subtracting, but is 138.778E - 18

    I get unexpected values in a subtraction routine. I'm using LabView 2013. In my example code VI, I have several condition blocks sequentially decremented 7 banks of values. I get an unexpected result when executing my code under the following conditi

  • BlackBerry Smartphones and the documents on the go games

    This is a very stupid question, but I'm not very good with technology - if I'm going. I was wondering just if you were paying for the games, whenever you use them as I do not have my Blackberry data package until the end of the month and I don't want