Printing - Officejet 8600

Similar Questions

• Problems when scanning double-sided printer Officejet 8600 Pro Plus

  Hello everyone

  I recently bought a printer HP Officejet 8600 Pro Plus (CM750A n911g)

  I am facing difficulties when more than one original double face scanning by ADF.

  A single page works fine, but with several pages it works in about 10% of cases.

  This is what is happening.

  In normal situations, side of first page the page is parsed, page is hit, second side is scanned, new page flips and ejects the page.

  But there are times that when the first side is scanned the first page is fed into the ADF, the second page we begin to slide into the ADF, because the upper feed Dungeon rollers turning at this time here in time.

  For the moment that first page trying to flip the machine 'sees' the second page and decided to eject the first page without analyzing the second side. It begins directly to scan the first side of the second page. (image is reversed 180% because the machine "thinks" it is the second part of the first page)

  This is happening (not always, sometimes some pages are treated as it should be) up to the last page.

  Last page is always correct, since there is no next page more to disrupt the process.

  Anyone know what to do to avoid this behavior? The paper used is normal paper 80g.

  I installed the latest version of the firmware in this machine (CLP1CN1304AR)

  I'm starting to think that this could be a bug software and superior power rollers run too long.

  I've tried different settings and this happens when starting a scan of the computer, but also when starting a scan of the screen touchscreen printer.

  Thanks for any answers

  Kind regards

  Ronny

  This one is over.

  For those who might be interested, he has focused on the machine.

  Machine update itself to works and always the latest version of the firmware very well

  Good bye

• OfficeJet 8600: default 2 sides print officejet 8600

  my firmware updated and now 2 copy/printing face is the default value. It's very disruptive! I do not use 2 sided.  How can we change this stupid default setting the Single value to face impression

  Hi itakexrays,

  You are right! My apologies. After you set the option 1 sided Original 1 sided copy , go to settings, lower left corner. Now, you will see up and down arrows in the upper right corner. Continue to press the arrow down until you see set as new default.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!

• HP OfficeJet 8600: Print using black ink only

  We use our printer as a copier only.  It is not connected to a computer.  Why do the color cartridges run out of ink and we cannot print black print.  We print any documents using color.  Is it possible to turn on the black only?

  Sorry, but the HP Officejet Pro 8600 has separated from the inks and printheads and requires that all inks are available to avoid damage to the print head.

  You can minimize the ink used with the following steps:

  • Use draft mode when the quality is sufficient.  Draft mode uses about half the ink or Normal or best mode.
  • Power switch of the printer only allows to turn off the printer.  If an external switch (as a protector or output impulse) is used more ink will be used at startup.

  HP and other printer manufacturers have technology another printer for different needs.  For ink jet printers:

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The Officejet 8040 has us an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet 8600.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Officejet 6700 is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

  If you do ever print color laser printer would probably be a better choice.  If you occasionally print color but especially black a HPI printer as those in the first category above can be a good choice.

• Cannot sweep of the MAC Book Pro using OfficeJet 8600

  I have used my OfficeJet Pro 8600 to scan until last week.  So I rebooted the software of HP and I still can't analyze.  I tried the Apple via AirPrint (version 2.0) drivers, still does not work.  Prints well but will not scan.  10.10 OSX is loaded but it worked for weeks after that.  The strange thing is that analyze the Mac of my wife (an old portable) with OS x 10.10 using version 1.0 of AirPrint.  Ideas?  I tried all the resets of the queues, etc.

  Hi @Cap1007

  Welcome to the Forums of HP's Support. I understand that you are no longer able to scan using your printer Officejet 8600.

  We know that this is not a hardware problem that you are able to scan the older Mac Help. your wife I included the document Mac OS X: Scanning Software done is not open or stops responding .

  Please let me know the results.

• Automatic on-demand for printing on 8600

  So my 6 year old niece signed for some children-letter to print every day. Problem is that she doesn't remember their login or password so I am unable to stop these dailies (colour) prints. Still not sure how she could know an e-mail or how she created something but this daily nonsense has now lost one of my color for my 8600 toner. I tried the obvious things, I think, but can someone help please! I need this printer on the network.

  HP.com/manageprint would be useful I'm sure, but who knows what children it's info.

  Hi Dankjista,

  Welcome to the Forums of HP's Support.  I understand that your dear niece subscribed you to one of the pads on the front panel of your printer Officejet 8600.

  It is very easy to subscribe to an application from the front panel, you don't need an email to subscribe.  If you do not use ePrint to the printer one of your options is to simply remove ePrint.  I've included the document delete ePrint and printable in connected HP HP .  I have also included the document How to stop platelets at the request .  The last option of the document is to know how to stop the planned printing of the control panel of the printer.

• OfficeJet 8600 scan to file on mac

  I have a MAC running Lion (10.7) I just bought a printer Officejet 8600 and I want to use the "SCAN to file" (directly from the Menu of printers).

  HP says that this does not work on a MAC... Is this correct? someone at - it work?

  Hello

  The computer function scanning work with Mac OS.

  Make sure to install the latest software of full functionality for your HP and not the original CD operating system that is not compatible with Lion.

  Be sure to select the Software from HP recommended during installation.

  http://FTP.HP.com/pub/softlib/software12/COL40131/MP-97865-2/OfficeJet-Pro-8600-series_v12.14.0.dmg

  Once finished the day, be sure to install any update available HP by clicking the Apple icon, then the about this Mac.

  If you reffer scanning to a function of a record network, the\ do not currently have supported by Lion because of the issue of the BONE.

  You can find more information below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3377075&prodTypeId=18972&prodSeriesId=3377075&ObjectID=c03037582

• OfficeJet 8600 Pro +-switch lamp cycling light then dim

  My printer Officejet 8600 Pro + is brand new and is connected via my cable network. It works perfectly until now. Wi - Fi and fax are also well (deliberately) turned off / disabled & unnecessary.

  The power switch has a beautiful green light to indicate that the printer has "power" OK - and the lamp seems to have two "on" States, namely 'dim' and 'bright '.

  The printer seems to go into "Sleep Mode" OK, and the control panel goes off as planned after my predefined interval 'Sleep '. (I do not use the schedule options).  She also wakes up OK when I send a print job.  Once again, everything is going well so far...

  While the printer is in this state of 'ECO' of low power, the intensity of the Green switch lamp varies slowly between high heat and Sun, on a cycle of 6 seconds - 3 seconds to "quick", then 3 seconds to "dim" and it keeps road - bright then dim then bright etc...

  BUT... and here's my question... This lamp should stay there "dim" while the printer is in sleep mode?
  Alternatively, the fact that he is back to 'light' all seconds imply that it is somehow failing to STAY fully 'asleep '?

  I can't find clues about this in the manual of the printer.

  Maybe I should raise a query with people to Support HP, but I thought I'd ask here first.

  Thank you in advance.

  Edited to add:
  I would be happy to know that any other Officejet 8600 owner (or the owner of any other model Officejet) sees this same high heat/Sun behavior on their switch lamp?  Thank you.

  --
  Help calm this edgy world - be quick to smile. Be slow to take offense.

  Hi PenSphere,

  This is normal. All 8600 printers here at my place doing the same thing. He is to inform the customer that the printer is in mode 'sleep' and not completely extinguished. I hope that helps answer your questions.

• How can I disable the cartridge on my HP officejet printer protection 8600?

  Hello

  I read that the officejet 8600 has a cartridge protection feature that can be disabled through the Toolbox. I have been through all the settings in the printer of his auto tools and can not find, I also have trawled through all kinds of HP stuff on my computer and cannot find any protection tool box or cartridge feature.

  It's one of the links, I'm referring too.

  http://www.cartridgesupport.com/HP950and951usage.PDF

  But has met several items similar to this on the net. If someone out there can give me a step by step method to achieve this goal, I will be eternally grateful.

  Thanks in advance.

  Robert

  Is your printer still under warranty? You can check with the tool of warranty HP here.

  If this printer is connected over the network, you can enter the printer's IP address in your browser and change the settings there.  You can find the IP address of the printer from the Control Panel, click on the wireless icon.

  This disables the marking cartridge so that they cannot be used in another printer, that it does not print with another printer that have already been marked cartridges.  From the web page: "feature allows you to mark all the authentic HP used in your printer cartridges so that they cannot be used in any other printer. If someone tries to use your cartridge protected in another printer, use of the cartridge will be blocked and they will be that it can be used in the original printer. »

  

• HP Officejet 8600 more print and scan problems

  Hello

  I had my HP officejet 8600 more for 2-3 years and always had problems following and just kept reinstalling the drivers as a quick fix. I am now starting a business from home and I have no time to deal with printing and scanning the questions and, of course, my warranty has expired! My operating system is OS X version 10.9.4.

  When I scan to my computer, the printer indicates "not found computer." The status of my mac is no different than when I scanned a document a few days ago! Remove and reinstall the drivers solves this problem temporarily but I want it fixed permanently.

  In addition, when printing, sometimes a page can print immediately and at other times, it may take 5-10 minutes to print even if its status is 100% full in the print queue - even once, reinstall the drivers is a quick fix but I want a permanent solution.

  Any help to solve these problems would be greatly appreciated.

  Thank you very much...

  Hello Hello!

  I thank very you much for getting back to me! Glad to hear things are working at the moment! Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Have a good!

• How can I print a watermark on my documents with HP OfficeJet 8600?

  Can I print a watermark with HP OfficeJet 8600?

  Hello

  You can install software, not the printer. What software do you use?

  Kind regards.

• Printer (n911a) e-all-in-one HP Officejet 8600: higher margins when printing Pages

  I use a Hp Officejet 8600 (N911a) e-all-in-one model.

  Windows 7 64-bit SP1

  The printer is updated to the latest versions of firmware and software.

  Browsers: IE 10, Firefox Google Chrome 32 26

  It is using wireless (wireless router)

  When I try to print something, she often prints too large

  (for example, when you print a coupon, he eventually print half left of the coupon because half right extends beyond the margin of page). You can only print coupons a limited number of times.

  I am able to change the print size in IE 10 by right-clicking > print preview > and size reduction before you print it. Firefox is always printed on the margins.

  I tried using the print Hp and Scan troubleshooting utility doctor. It found no errors.

  Note: this problem is not occue when I choose to print to a different printer (HP LaserJet Professional M1217nfw MFP)

  I am a student, so I insist a lot on this printer. All advice is appreciated.

  Thank you!!!

  Hello

  It looks like firefox and printer compatibility. Firefox has just released a document fo adjust the print settings.

  http://support.Mozilla.org/en-us/KB/fix-printing-problems-Firefox

  Hope this will help you.

  Good impression

• HP officejet 8600 wireless printing error

  My HP officejet 8600 wireless 1 page prints at once.  Anything larger than a page and I got an error message.  Recently upgraded from WINDOWS 8 to 8.1 - no improvement.  Very frustrating! It would really appreciate advice...

  Hello dabadia,

  I'm sorry to hear that your 8600 Officejet will print a single page at a time after your upgrade to 8.1 Win. I would like to help you and give you my best advice.

  I recommend running HP Print and doctor to analyze first to find and fix common printing problems.

  If this does not resolve the problem, I recommend then Uninstall the printer, restart your computer and reinstall the software using the Printer Wizard install for Windows.

  Good luck, I hope this works for you!

  Kind regards

• HP Officejet 8600: No photo printing

  My Hp officejet 8600 will display the text but no pictures.  He told me my printer does not communicate with the printer, I can print a text very well.

  How is the connected printer - USB, wired LAN or wireless? What program are you printing from?

  I suggest going into Word (you have one) and paste a picture into a document with text.  Try to print to it.  If it prints OK I suspect the settings of the printer for the program that you use to print photo is perhaps not properly configured.

  If a Word document with a photo and text does not print http://www.hp.com/go/tools diagnostics can help solve the problem.

• How can I print from my phone smart hp officejet 8600 window 7 64-bit

  How can I print on my printer to my Android phone

  You can do this in two ways:
  ePrint printer (set up an email from the printer and send a document to the Android)
  * Use the HP ePrint home & Biz app that allows you to print directly to the printer of the Android

  In both cases, the officejet 8600 should be connected to your network wirelessly or through ethernet. To start using home & Biz it android should be connected to the same wireless network that the printer is working correctly.

  I hope this helps.