Printing on the network home using WRT120N router

At home, I have two desktops (bedroom and living room), a printer of room bedroom and a router WRT120N. Office of the bedroom is connected to the WRT120N route and the printer is connected to the desktop computer bedroom.  The Office of the living room is connected to the WRT120N route. I can print from the table of the House, but may not know how to print from the Office to the living room.

How can I print on the room from the living room office printer?

Run the file and Printer Wizard on your XP machine.  Under printer, you should see a little hand under the printer icon.  In the other computer, run the add a printer.  It will find your printer.

Tags: Linksys Routers

Similar Questions

  • Sharing of a printer on the network home

    I have a HP USB printer connected to a desktop computer running XP in a wireless home network.   I'm now having trouble getting a wireless connection to the printer with a new Dell laptop computer, running Windows 7.   I went on "sharing printers" on the PC desktop, but when you use the option to add printer on the laptop (running Win 7) it does not find the printer.  What Miss me?

    Here's the Forum Vista, XP or Windows 7.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    See you soon

    Mick Murphy - Microsoft partner

  • Computer not finding printer on the network

    I have an OfficeJet Pro 8600 Plus with a wireless connection to my home network, E2000 Cisco router. I have install the printer using the software that comes with it. Everything worked fine for several months, but recently, I found that my network computers are randomly impossible to locate the printer on the network. I am also unable randomly ePrint. I noticed that if I power cycle the router, the computer will then find the printer. Now, I am regularly power cycling the router. Should not have these problems, I don't know even where to start asking questions. I'm not having other problems with the router. I connect to the internet OK, see the other computers on the network OK, just could not find the printer. There are usually 3 different computers that are enabled and disabled the network throughout the day (sometimes using the printer, sometimes not).

    What are some of the common issues that could cause this problem? Any suggestions to make the connection to the most reliable printer?

    Hi there, your PC into hibernation should not make a difference but some common router settings to watch out include:

    •Wireless isolation is enabled (won't let not peripheral connected wireless to talk with each other)

  • Computer cannot find the printer on the network

    I have a Photosmart D110A and use a router Airport Extreme to print from my PC and iPad.  Until a few days ago, it worked fine but now neither my iPad or PC can find the printer on the network.  When I run the test report of network on the printer, it shows that everything is fine and dandy.  No the guided HP solutions even to get close to solving this riddle... it seems that any questions they discuss involve the printer will not connect to the network.

    OK, so they are both on the network of comments.  Comments network does not allow for communication between devices.

    Open Airport utility, select your airport and click installation manual.  Access to the Internet zone, then DHCP.  What are the two structures IP DHCP for your two airport networks (invited and regular).

    For example, mine is 10.0.1.X for the ordinary and 17.16.42.X for my network of comments.

  • Need help Kodak 5500 AiO printer over the network.

    I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer.  I need help.

    Thank you

    Phil

    original title: using network printer

    Everyone,

    That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.

    Hey all,.

    We had this same problem...

    We had to follow the procedure proposed by Drompa...

    > 1) share permissions
    >> 1. In explorer, select C:\windows\system32\spool\PRINTERS
    >> 2. Make a right click, properties
    >> 3. Tab sharing
    >> 4. Advanced sharing
    >> 5. Check "share this folder".
    >> 6. Permissions
    >> 7. Grant everyone full control
    >>
    (> NTFS permissions 2)
    >> 1. In explorer, select C:\windows\system32\spool\printers
    >> 2. Make a right click, properties
    >> 3. Security tab
    >> 4. Edit
    >> 5. Add
    >> 6. Advanced
    >> 7. Find now
    >> 8. Select 'NETWORK '.
    >> 9. Ok
    > 10. Total control of the NETWORK grant

    AND THEN we had to install local printers, using the port trick...

    1. go to 'printers '.
    2. click on "add a printer".
    3 Add a local printer.
    4. "create a new Port.
    5. use the "Local Port" option
    6. on "Enter a Port name" enter: "\\Computername\Printername".

    And if all goes well should do!

    Good luck!

    Credit to Drompa and otherdreams to help out me.

    Phil

  • That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

    That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

    A

    Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

    ▹ System Preferences network ▹ 

    If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

    Configure IPv4

    If the selection in this menu is

    Using DHCP

    Click on the button

    Renew the DHCP lease

    Test.

    Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

    B

    Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

    1. Change the selection in menu using DHCP.
    2. Change the address assigned manually to one that is not used by another device.
    3. Change the address of the other device.

    Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

    If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

    C

    According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

  • LaserJet 4050N: cannot connect the printer to the network.

    Hi all

    I recently moved my house, where a new router. My HP LaserJet 4050N was previously connected to my router to another and worked well on the network. However, in my new House and my router (ethernet port connected to the printer) I can't find the printer on the network. I tried to change the IP address, but still when I try to ping, I get the timeout error.

    Help, please.

    Hi Calstar,

    I suggest you uninstall the printer and then reinstall it with the new IP assigned to the printer. Let me know what you find?

  • How to recover or find the network key for a router wireless (Netgear)

    Network wireless adapter NIC Ethernet network device

    How to recover or find the network key for a router wireless (Netgear)

    Hi RaymondKramp,

    ·         What version of Windows is installed on your computer?

    If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

    If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

    For more assistance, you can contact Netgear Support:

    http://support.NETGEAR.com/app/home

    Hope this information helps.

  • OJ 8500 A910 Pro - iPhone does not see the printer on the network?

    I have my HP OfficeJet Pro 8500 A910 connected to my wireless network.  The printer found the network and now has an IP address.  My iPhone is also connected to the wireless network.  I can see both devices on the router.

    When I walked into photos and try to print a photo, he says to choose a printer.  When I click on choose, I get "No Printers Found.

    Any thoughts?

    Hey k9rescue!

    Sorry to hear that you are having a problem with AirPrint. What iOS version are you running? And what iPhone model do you have?

    Additionally, if you are unsure that your device supports AirPrint, try to turn your bluetooth off and see if the printer appears.

    Let me know if it helps!

  • HP 2520HC: install the software of the printer over the network

    Hello

    I use the HP 2520HC series at the office. I use a network connection.

    Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

    Please help me.

    Hello

    such a USB printer allow only all features on a directly connected USB computer.

    Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

    You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

    Kind regards

    Shlomi

  • documents of fact pending does not print when printing over the network

    Hello!
    Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
    When I tried to print via USB cable, it works well.
    I don't understand how this problem can be solved.
    Kindly help me.
     
    Printer model: HP LaserJet M1120n MFP

    Hello

    Looks like the printer is not on the network or the ip address may have changed

    Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

    or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

    Although I am an employee of HP, I speak for myself and not for HP.

    * Say thank you by clicking on the "Bravo!" Star"located on the left *.
    Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

  • Install HP Officejet 6500 E709n failure - can't see the printer on the network

    My HP Officejet 6500 E709n refuses to acknowledge that he is already on the network a specific IP address and used by other computers in my house. How can I get this software install to work?  I have to let Windows 7 install its own version, which worked (sort of).  I prefer having the center of solutions for scanning, but the HP install software (full version), in contrast to the MS Windows 7 software, can't find the printer on the network, even when I give the software the exact IP address.

    (Yes, I uninstalled all the pieces I had to uninstall in Control Panel by the NSB instructions re-re-re-install software page.)

    Hi rchimes,

    Thank you for the update. If you are unable to get the problem solved after using the doctor print and Scan follow the steps to scrub the software on the computer and then reinstall it.

    First step: clear temp directory

    1. tap folder in the race or search programs and files of field

    2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

    3. proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1 download the drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know what you find?

  • Photosmart 5510 MacBook Pro with OS 10.9 does not see the printer on the network

    Continues to give the error message that the printer is offline... in the process of installing it says successful implemented, but impossible to find the printer on the network... I has not changed anything, unless there was an automatic update done some part/sometimes recently... it was working fine.  The self-test on the printer wireless past everything!  iMac and iPad see & print!

    Please help me!

    Oh, Yes, it appears in the list of devices printer twice: once HP 5510 series when connected by USB, and once as 77 has 267 with everything what unknown IP connection but State... is one that says offline and cannot be found on the network.

    I tried all the steps listed in the proposals of the forum without success.

    Hi msdok,

    I understand that the printer is appearing offline even if you can print from the iPad and iMac. I see your message that you have already done some troubleshooting, but I'm not sure what you tried. I recommend using the steps below if you don't have it already.

    Reset the printing system

    1. Click on the Apple icon ( ), then click on System Preferences.
  • Users on the network cannot use the files after upgrade to Windows 10

    When I switch to win 10 people on the network cannot use the files on my computer

    Hello

    Thanks for posting your query on the Microsoft Community.

    With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.

    I would be grateful if you could help me with more information to better understand the problem and a solution:

    1 is this computer connected to a network domain or home?

    2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?

    In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:

    http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_web/Windows-10-network-file-sharing/18fba63e-7b6c-46FE-BA23-575a634fcee8

    Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.

  • LaserJet P2055DN - do not print over the network

    Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

    I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

    Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

    Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

Maybe you are looking for