Printing on WinXP via a USB port.

Similar Questions

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• Problem connecting to HP DJ5900 via the USB port on the router

  HP DeskJet 5940, MacBook Pro, OS x 10.6.8.

  I want to connect the DJ5940 through my router (Speedport W723V) via the USB port.

  I see that the printer is connected to the USB port of routers and adding a printer on the MBP works.

  However, when I try to print, printing dialoge sas is printing (full % increases), but nothing is displayed and the status of the printer finally chnges for "printer paused".

  Is what I'm trying to do possible?

  Dean,

  Thanks for your help, but I went in a different direction: the Speedport router is EXTREAMELY oriented Windows, to the extent that it has nothing in the documentation to do anything with a Mac, so I've dug a former print USB/Ethernet of Axis Communications Server. At least 7 years old and no documentation, but connect to its IP address allowed me to set it up, and Macs connected to it directly.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Connect Legacy parallel printer on computer laptop w/USB Port

  Anyone with a printer HP legacy parallel port and a newer PC will have a challenge connecting the printer to the PC. The question is: can it be done and, if so, how?

  I have an old, OfficeJet - a R40xi relaiable. She has just a single interface - a parallel cable. Now, I have two PCs with no parallel port - an HP laptop and a desktop HP. Both running XP Home OS.

  Question is - is there hope using a parallel cable series on the laptop or a parallel to USB cable either?

  I suspect that Windowz XP and the driver of HP will not 'see' the printer on the serial or USB ports. Before that I go out and buy cables and pass the TIME, trying to get the system to work, I thought I would ask the advice of EXPERTS. Everyone out there knows?

  One option that I still have is to install a parallel card in the desktop PC. I don't know if there is a parallel PCI card for the laptop, but I can watch using GMBMG.com.

  TIA.

  Ko

  here ya go to start. Google may be a spy, but sometimes he is your friend

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

  We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

  SlaKir wrote:

  The answer is YES

  Well, then your USB port is likely.

  Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

  Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

  Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

  Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

• BlackBerry Smartphones No micro sd, data connection, simply to transfer photos and other BlackBerry to the computer via a usb port

  Very well. So I don't have a data plan on my blackberry, so no not web email, I use it strictly for telephone calls, text messaging and taking pictures. I want to transfer my photos and my text messages sms from my phone on my computer. I would also like to transfer my ringtones if possible but I won't push my luck on this one here. I don't have a microsd card in my phone, so everything is recorded directly on the phone itself. I tried to connect my phone to my computer via the usb port but it does not allow me to go into things phone and copy on my computer. I also downloaded and tried the blackberry desktop manager, but he wants me to turn on the storage of mass media that will not help me because there is no microsd card in my phone. I want to record everything on my computer because I bought a new phone that is NOT a blackberry and I want to have my files on my computer. Can someone help me please?

  Thank you!

  Hello

  Try to download and install an earlier version of the desktop as the BlackBerry Desktop Software 4.6 software.  You should be able to download it here: https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  Which works best?  Another option is to get the CD that came with your phone and install the original version (assuming you still have it).

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• Animate the CC of the tests on the device via the USB port or the publication of device does not

  Without a paid with Apple Developer account (waiting to have in fact my first AIR for iOS app works correctly), I created the .mobileprovision and .p12 files successfully in Xcode. With these I figured out how to debug in the Debug of Animate version iOS Simulator > DebugMovie > iOS Simulator but I can't debug my device (iPhone) via the USB port. ("Impossible to install the application. Make sure that the selected devices are connected. ") Connected and on. No problem with the available memory.

  Past the other road, I published with success (he said) but my iPhone will not complete downloading the app in iTunes and even less using the 'post publishing' check in settings to install on my selected iOS device of publication. It is there no dialog, no explanation why... simply "the application was published successfully."

  I moved the .ipa file in iTunes and on my device. It says it is syncing but then goes with anything. I once accidentally dragging the icon of my iPad where it has at least tried to install it. The dimmed icon appears on this device with "install...". "below, but it was not built for the iPad, so I trashed it after a few hours.

  I have watched the video of Adobe and don't see what I'm doing is different.

  In Xcode, there is a window of devices. You can select your iPhone and check requests in this regard. Try dragging the IPA in this list. It may still fail, but I hope that Xcode will give a better error message.

  It is a faster way to much to get applications on devices using iTunes. If it does not copy OK you can then try remote debugging in Animate and then open the application. The IP address of your computer, you must have this ready to type in.

• Via a USB port with a network printer

  Hi all

  I have a peculiar problem.  My company has Win7 and locked our laptops.  Can I install USB printers but not network printers.

  I have a LJ 425 MFD dn, who worked as a champion for the last couple on my network ofyears domestic.

  What I want to know is, if I can now connect to the rear USB port and also use it to print?  The machine will do both?  If this is not the case, can I connect to print, and then sign out and let him return to the networking features or do I have to restore it on the network every time I'm doing this (fixed IP).

  Thanks for any help.

  Jim

  This will depend on how tightly locked down your business is portable.

  To tell you the truth, you should check with your company system admins to see if what you want to do is possible before searching and mucking with equipment of the company.   We recommend that you violate your company computer policy just for the convenience of printing at home.  If its for work, then it can wait until you're on the job to print.  If you have a reason to print at home, then your company should be responsible to provide you with a printing solution that is approved.

  Thing to know is the software that is installed by default by HP.  If your newly guarded work computer running inventory on the applications that are installed you could be marked for a software not authorized by your IT Department.  The only pilot facilities are a little safer, but you will have to rely on 3rd party applications provided by your company in order to avoid stepping on the toes of scanning.

  You say you can install USB printers so we will assume that you are willing to take the risk and the computer is allowed to add printers custom.  You'd have to do is to download and install the drivers/full software solution for your operating system and personal printer.  Locate the drivers and the download page for your printer from here: http://support.printers.com. Once the files on the computer, and then run the installation and perform a normal USB installation according to the steps in the installation wizard.

  A printer can be the USB connection or network connected at the same time.  If there are job never contradictory in the queue of the printer will just print them on a first come, first served.  There should be no need to unplug the printer from the network to print via USB after correct installation.

  Hope that answers your questions.

• Photosmart 7960 installed via the USB port on the PC under Win XP Pro acting as a print server

  I have a PC running Windows XP Pro, which acts as the home network file and print server.   The Photosmart 7960 is connected to this computer via a USB cable and configured to be "shared".   When I go to "Add a printer" on another PC, in Windows 7, which is also part of the same network, I can navigate to the 7960 correct, but the installation wizard is unable to find the driver for Win 7.  I still have what in the HP see basic documents that tells me how to add this shared printer on my Win 7 PC.  Looking at the support page drivers I saw that Windows 7 already has the driver.  True, but the only way, it seems that I can get to it is to connect the printer directly to Win 7 PC via a USB cable.   Any suggestions?

  Apparently, the solution is as follows.  First connect the photosmart 7960 directly to the PC running Windows 7 via USB cable network.  It will be auto-install drivers.  Reconnect the printer to the PC under XP pro server.   From the PC running Windows 7 where you have installed the printer via USB, you can go ahead and remove the photosmart 7960 from the list of printers; This will not remove the just downloaded drivers.  Next, select Add a printer, and then select 'Add a local printer' (no network).  Select 'Create New Port' and click Next.  In the next dialog box, type the name of the host server and the name of the printer.  In my case, it's \\mainserver\HP photosmart 7960. Click Next.   In the "Install the printer driver" dialog, click "Hewlett Packard" and find the 7960 in the printer list and click Next.  I was able to successfully install the printer this way.

• Pavilion PC500 - 467C: flag do not print via a USB port to LaserJet 4

  Pavilion does not print using the printer LaserJet 4 USB interface cable.  LJ 4 load drivers for USB local port.  Win 7 does not have the USB printer.

  Thank you

  The Laserjet 4 do not have a USB port.  You use a USB / parallel?  These can be problematic.  The posts here have USB-parallel cable users reported work with Windows 7.

• HP3070 analysis via the USB port, but don't scan the network, printing is ok? Used to work, but no more

  MyHP3070 deskjet will scan and print via USB link, but don't scan the network, printing is authorized via netowrk. Used to work but not anymor. I have windows XP laptop. I tried HP doctor but in vain. It says that it cannot connect with the driver. Tried to uninstall and reinstall from the CD and also downloaded driver via HP web page but does not. Any ideas what to try next? Also have Norton 360 software virsus and tried extinction of firewalls, etc., but it doesn't seem to help. What is confusing, is that it is used to work but now is intermittened, it won't work at all.

  I managed to uninstall with REVO Uninstaller. This removed the driver original from the Add/REMOVE program possibly a result.  This then allowed me to install the driver that you recommended to your link above. I ran out of time yesterday to test if the printer has worked with the new download, so I'll have to try again later today to see if it works. I would grab with result.

  Thanks a mil

• HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

  Hello

  I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

  Sincerely

  Hello metehangunaydin,

  Please try the procedure below so that you can at least be able to print.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.