printing problem after upgrade to el capitan

Similar Questions

• Printing problems since upgrading to El Capitan

  Two weeks ago, that I've upgraded to El Capitan. Since then I was able to print from Adobe Acrobat or Microsoft Office programs. I use my Macbook for business purposes, and there is downtime with my work on this issue. This has nothing to do with printer drivers that I can't print to PDF either.

  I've used nothing helps Apple telephone support. I went to an Apple genius bar and they could not understand either. They have wiped my phone, and then I went home and restored the time upward from the standby machine. The problem was still there. So I uninstalled Microsoft office (last resort recommended by technician at the genius bar) and reinstalled. The problem is still there, and worse yet the Outlook is freezing. I rang a repairer of random computer company this morning specializing in Macs. They said they couldn't help me because they would only do what I've done. My Macbook Pro is just a few years, and now I'm looking down the barrel of the purchase of a new laptop - all because I upgraded to El Capitan!

  Troubleshoot printer on your Mac - Apple Support

  cant - print.html http://www.Macworld.com/article/2029528/Mac-Troubleshooting-What-to-do-When-You-

• ScanDisk USB Flash Drive problem after upgrade to El Capitan

  After the upgrade to El Capitan, I can't access the vault secure on my USB Cruzer facet flash drive. I have Plug and display files as usual but when I try to open the safe, I get the message ' Scan Disk Secure Access V 2.0 requires San Disk USB Flash Drive. Please insert one. »

  The Flash Player has worked fine before the upgrade to El Capitan and I can still use the files outside of the secure vault but, basically, I cannot now access the secure vault. I'd appreciate any thoughts on how this can be resolved. I only am not an expert so please, keep it pretty simple.

  Sounds like a problem of compatibility with the Secure Access software and the OS X El Capitan of SanDisk.  Try download and install the latest version of Secure Access of SanDisk.

  It seems also be other users having the same problem, you may get better assistance with this through SanDisk.  Someone else said that upgrading to the latest version of Secure Access has solved the problem.

  http://forums.SanDisk.com/T5/SanDisk-SecureAccess-2-0/SecureAccess-2-0-and-El-CA Dube/td-p/347378

• Printing problem after upgrade HP solutions Center / windows 7

  Hello everyone,

  Since I've updated my PC for windows 7 (and a new version of the HP Solution Center), I can print is no longer any document (the only way to get something out of the printer, print a test through the solution Center page).  Communication is Ok (correct ink levels etc.).  Printed materials appear in the print queue, and then disappear as if they are printed, but nothing is (no error message).

  I have Windows 7 Home premium, to C5180 all-in-one USB connection.

  I already tried the HP diagnostic program and uninstall / reinstall.

  Any suggestion is welcome.

  Thank you!

  I would like you to try this.  Unplug the usb cable from the printer and uninstall the printer software.  Then go to this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us select 32 or 64 bit and install this "HP Print fix software when upgrading Vista to Windows 7" then reinstall your WIndows 7 software for this printing.  Let me know if this solves your problem

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.

• Office jet Pro L7780: Office Jet Pro L7780 stopped scanning after upgrading to El Capitan

  After the upgrade to El Capitan I can't us the scan function.  I deleted and reinstalled the driver.  Scanner does not appear.  I tried to install HP "Easy Scan" and it says that the scanner is not available. What to do?

  Thank you

  Ron

  Hi @danorske,

  Welcome to the Forums of HP Support! I see that you have problems of analysis, after upgrade to El Capitan. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please try the steps listed in this document, Printers HP - Scanner USB connection is lost (Mac).

  If the network printer, please use this document, Printers HP - Scanner card WLAN is lost (Mac).

  Probably the step to reset the printing on Mac system, will help you in this situation.

  How is the printer connected?

  Please let me know the results and if there is anything else I can help you. Thank you.

• Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

  Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

  I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

  Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

  -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

  Did you delete anything?

  -The Mac can't you start mode (boot with the SHIFT key) safe?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• MacBook Pro(MID-2012):Issues after Upgrading to El Capitan

  I use Macbook Pro mid-2012 version. After upgrading to El Capitan, I am facing a lot of questions.

  (1) the DMG files does not open. said hdiutil attach has busy resource failed.

  (2) my Macbook Pro will not stop completely.

  (3) my systems updates install completely. They hit each other between installation (had to force quit)

  ' (4) ' about this Mac ' gets hit when trying to access storage tab.

  Any suggestions?

  Your MBP was working perfectly before the update?

• Import old box Inbox and sent in the Mail after upgrading to El Capitan

  There has been much discussion about the e-mails lost after upgrade to El Capitan, but I have not seen this particular question.

  I discovered that, like many others, all emails in my Inbox and in my sent folder to leave before the upgrade had disappeared. The issue has not affected the emails I had moved to folders.

  Open the mail library file (in the Finder, hold down the Option key selecting go to the top menu and the library appears), I discovered that Mail was created a new file V2, account, while the old one, V3 (created in 2013), sitting next to her. Go by the size files, it seems fair to assume that the V3 still contains my "lost" emails

  So, I don't know if the bug is that a new V2 should have been created at all, or is it a sync error, or something else. What I know is that when I try to import the items from Inbox and sent from the V3, I get an error message telling me that no mbox valid was found. This is patently false.

  I also tried to copy on an external hard drive, gave them a different name, but even then I couldn't import them. Reconstruction did not help either.

  Anyone able to help? I have a few crucial e-mails out there, and I try to avoid the upgrade...

  

  Address postal (El Capitan): import or export the mailboxes

• Latitude E5520 Audio problems after upgrade to win 10

  I have audio problems after upgrade to win 10 64-bit.

  Dell Latitude E5520 IDT 92HDxxx HD Audio
  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

  (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

  I would be happy to provide more information and help to debug.

  To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

  *************************************************************************
  Hello
  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows. Check their documentation online with Dell Support, and
  drivers and ask questions in the forums about known problems. Make sure that you are
  Run the latest version of the BIOS, chipset and drivers.
  I hope this helps.
  *************************************************************************

  I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  Thank you
  John D.

  johnsdagg

  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows.

  Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

  johnsdagg

  I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

  johnsdagg

  If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

• I can't import my LR6 RAW files after upgrade to El Capitan...

  I can't import my LR6 RAW files after upgrade to El Capitan...

  External drive is formatted in NTFS in Windows format, and you HAD a utility installed in your earlier version of Mac OS X to what OS X write on a NTFS formatted drive. Mac OS X cannot do it by itself. As you upgrade to OS X 10.11 is removed and or disable this utility causing OS X see this drive read-only (OS X can read NTFS disks formatted in native mode, but cannot write to them natively). You will need to reinstall this utility and or get a updated version of this that works with El Capitan.

• Office Jet after upgrade of el capitan 4620: 4620 - not printing black

  After upgrade my iMac to El Capitan, the printer does not print black.  I tried all the troubleshooting steps I found, and no solution to the problem:

  1. replace the ink cartridge

  2. check the ink cartridge has ink

  3 reset ink system

  4. clean the print head

  5. aligned to the printhead

  6. update to the latest driver software for El Capitan

  7 restart the computer and the printer

  8 remove the printer from the system preferences, and then added back the iMac

  Other suggestions?

  Anyone else see this problem?

  Hi bevandas,

  Thank you for your answer!

  I know that this printer mixes in order to get a black box, because of the multiple color ink cartridge system. I suggest trying to replace yellow cartridge because it is low, just in case this could be the problem. There was some questions about upgrading Mac OS x 10.11 El Capitan, but not on this issue.

  Otherwise, please Contact HP phone support for assistance. As they might be able to help the process of upgrading your printer. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Good day!

• Bootcamp problem after upgrade of the El Capitan!

  Hello

  I just upgraded to El Capitan Yosemite on my iMac, so I can't find my bootcamp. I tried to do with lonely T instructions, but yet, I think I did something wrong (not very tech savvy just follow the instructions). Bootcamp volume appears in the finder and accessible but non-startup disk. Protection of the integrity of the system has been disable by running csrutil the command disable on recovery mode. I need help!

  additional notes: I have an extra partition named Extra, and I went through the same process using gdisk when I added the partition when using Yosemite. He works at this time, but not now after El Capitan upgrade.

  And I realize that I don't have "No CoreStorage groups of logical volumes found".

  

  Not sure if necessary additional info:

  

  

  Thanks in advance, please guide me in the process.

  Derrick

  Please enter 'p' to the list of files in the last Data MS and after the release. What does the 'Extra' on your Mac partition? Do you have 'lost' Windows when you created "Extra"?

• Messages after upgrade to El Capitan

  After the upgrade to El Capitan 10.8.5, my message list shows only the phone numbers instead names/photos of the people? How can I get this back to show my son by his name?

  Please take each of the following steps that you have not already tried it.

  Step 1

  You may need to synchronize contacts between the Mac and other devices. One way to do that is via iCloud. On Mac, open the iCloud preferences window and login if you haven't already. Check that the box Contacts. Do the equivalent on your mobile device.

  Make sure that your contact accounts are activated in tab Contacts preferences window accounts.

  Step 2

  In the menu bar, select

   ▹ System Preferences... Region & language ▹

  In the region in the window menu, select one of the predefined regions. If it is already selected, select another, and then change it back. Close the preferences window. Quit and restart the messaging app.

  If you still have the problem after taking these steps, post your results.

• I'll always be able to run the opening after upgrade to El Capitan?

  I want to install Office 2016 on my MacBook Pro which is running 10.9.5 - it asks me to upgrade to El Capitan. I'm afraid that Aperture will not work more.

  On El Capitan, you need opening 3.6.  You are currently running opening 3.5.1 or an older version?

  Before you upgrade to el Capitan make a full time Machine backup of you system so that you can return to the Mavericks, if need to be.  (see: OS X El Capitan: revert to a previous version of OS X)

  And check if you are able to update to 3.6 opening.  Check before upgrade you to El Capitan.

  • Open the App Store and sing in your account in the Store with your AppleID menu.
  • The fourth "shopping" tab  Figure opening it to your purchase history?  If so, you can update opening 3.6, once you have upgraded to El Capitan.  If the opening is absent from your purchase history, you will only be able to update with the help of the PapSTore supported.

  See this user Tip: update to Aperture 3.6 after the release of Photos

  https://discussions.Apple.com/docs/doc-8402

  3.6 the opening is the latest version of Aperture and the only one to run on El Capitan.

  There are more and more questions with an opening. Opening 3.6 is running on El Capitan, but keep accumulating the minor bugs.

  • When brushing the adjustments, the position may be a bit off, a pixel or so.
  • The thumbnails in the list view are backwards.  Re: opening and El Capitan OSX
  • If you add a curves adjustment, adjustment to straighten will be not visible in the exported images. See: right
  • The link to the plug-ins page work is no longer in the opening menu, but it's the same for all versions.

  And you can order are no longer produced printouts of Aperture. Apple has stopped completely, the support for Aperture print products in any version of Aperture.