Printing problem with my HP c310a (on wireless network now) MacBook Pro 2012 Maverick

Similar Questions

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• I have problems with the connection to a drive of my Macbook Pro and Tolino

  When I connect my player Tolino (ebooks) with my Macbook Pro it does appear for a few seconds, and then the connection went?

  Taken Tolino supported by Mac OS X?

• Problems with getting WAP54g repeat (extend) wireless network

  At one of our offices, we have a Cisco ASA5505 firewall that has dhcp active. I have a WRT54G Router plugged into this active firewall with DHCP. The scope of our internal network is 192.168.51 *, but when it is connected to the WRT54G, it gives you the scope of 192.168.1. * We have an antenna amplifier screwed into one of the ports on the router antenna. This configuration all works very well.

  The problem is to install a WAP54G access point in a building on the property (picks up the signal fine wireless router) to repeat the signal wireless at the rear of the property where the router will not reach. I've read that all you have to do is type the routher wireless mac address in the access point and select "wireless Repeater". I have the channels set to 6 on both devices as well as the same security configuration. When I try to connect to the network wireless access point, it never gives me an ip address in the scope 192.168.1. *, that the WRT54G is configured to give. Anyone know what could be the problem?

  In addition, in this configuration should the WRT54G be defined on the router or gateway mode? I didn't need to distribute ip addresses

  Here are the ip addresses and the data of each unit

  Cable modem-->

  Cisco ASA 5505 Firewall - 192.168.51.1-->

  WRT54G - IP address of the router - 192.168.1.1, however it uses DHCP and the ip address and the gateway he uses for the internet are of the order of 192.168.51. *-->

  WAP54G - 192.168.1.245

  Any help would be appreciated, I might even make a phone call. Thank you

  I got it. I was working with security personal WPA2 on both devices. I removed the security completely and both devices connect then. I then used to fix, WEP. The two devices communicate with WEP.

• New Dell Inspiron 1764: Problems with signal low connection to wireless networks.

  I have a new laptop Dell Inspiron 1764 I received on 25 June. It is "replace" a Dell Inspiron 9100, who has learned to be too slow and too bulky for my needs. For the purposes of support, the two laptops are running on Windows 7.

  Overall, I love my new Inspiron 1764. However, I noticed the connection/signal strength seriously degraded, with wireless (Dell Wireless 1397 WLAN Mini card) card, compared to my Inspiron 9100 (Dell Wireless 1350 WLAN Mini-PCI card).

  In areas of my home that my 9100 can obtain the power of the complete signal (5 bars), my new 1764 bars 2 or less. This behavior is not as limited to only my house as I have tested in my work and in an area of less than 10 feet away from the wireless router, I have 'Internet connectivity problems.

  I tried twice this morning talk with Dell technical support. The first person I talked to tried to be helpful and initiated at least a DellConnect session with me so that he can check out some of my settings and such (However, why they went twice in my sharing settings I could not determine as they have absolutely nothing to do with the intensity of the signal).

  Unfortunately, I was disconnected from the session when I went to a place that had less signal than just next to my wireless router.

  I then go on the chat support with Dell and received another technician to speak with. I explained my problem, told them that I was in a DellConnect session with the other technician, and they looked to the top of my support contract.

  They then told me that my warranty does not cover software issues and referred me to the software Department and said it would be a supplement. I told them that I did not believe that it is a problem of software in any way, shape, or form. They told me that it must be a matter of adjustment. I spent several hours scouring the internet forums on Dell and other sites check those who have had similar problems. Some of their questions were certainly the software settings, but I still don't yet to find anything that tells me I have an incorrect setting of software.

  So far, I'm standing in my kitchen, tapping on my Inspiron 9100 with a full 5 bars, while my Inspiron 1764 is sitting next to me with a skinny 2 bars, and I am literally standing 7 feet above the room which houses my Linksys WRTU54G-TM router.

  Personally, I suspect a faulty wireless card, but how to convince Dell to hear my case and replace it instead of trying to bilk me for support of useless software?

  I hope Dell Tech Support bed actually this post, or people with the same problem can Dell refer to my previous post describing the problem and the fix.

  It IS a PROBLEM of MATERIAL WITH the ANTENNA, AND VERY PROBABLY THE DIFFERENCE BETWEEN a DECK CONNECTION at the ANTENNA of the PLATE, from connections TAPE FOIL INDIVIDUAL at the ANTENNA of the PLATE, THAT DELL MUST HAVE RESPONSE BETWEEN WHAT MINE PORTABLE has BEEN CARRIED OUT AND THE SPARE ROOM WAS MADE. THE PROBLEM IS NOT SOFTWARE, PROVIDER OR ROUTER, IT IS THE PLASTIC WITH THE ANTENNA CASE!

  Dell is in fact losing more money with the hours of technical support through software patches and sending technicians with new wireless cards that does not solve the problem. They need to send and replace the plastic case behind the LCD screen with the updating of antenna and connections.

  Good luck!

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

  My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

  If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

  This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

  See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.

• I had problems with windows live mail, I uninstalled it, now I have no e-mail at all, can you help me. I've been using windows vista

  I had problems with windows live mail, I uninstalled it, now I have no mail at all, I was using windows vista

  Hello

  You can download, install, and configure Windows Live Mail again or use Windows Mail, which is the default email program in Vista.

  How to set up Windows Mail.

  Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

  Ask them to:

  1. your username with them

  2. your password with them.

  3 incoming mail POP3 server.

  4. the outgoing mail SMTP server

  All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

  You can use this guide to set up Windows Mail:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  See you soon.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions

  With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions?

  Hello

  Please make sure that you work in 8 bits/channel and RGB mode. (Under Image > Mode > Select RGB and 8-bit per channel) lightning effects only works in this mode.

  Also in preferences > Performance > "Use Graphics Processor" must be checked.

  

  ~ Assani

• Printing problems with my printer Epson Stylus NX510 wireless.

  original title: Wireless printer issues...

  Help!  My router died and I work from a Home Office, so I use a wireless on loan from my ISP... it is a temporary solution until they can get out of my house and install a new router. My internet is fine, however, my printer/scanner/copier wireless wouldn't work. So........ I uninstalled and installed using the new wireless 'name' to save it. It allows to copy, but not print from my computer. The computer recognizes it but it says it is offline connection and guard my documents in what. In addition, my Epson Stylus NX510 printer still displays a page with my ink level and tells me that it is printing this page appears but does not read my ink level and it says that my printer is ready to print. My wifi lite is on the printer...

  any suggestions?

  Thank you!

  Jodi

  Hello

  1. What is the operating system installed on your computer?

  2. What is the exact error message you are getting?

  Please follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• HP Deskjet 2540: Wireless printing problems with HP Deskjet 2540

  Hi all

  I have a problem with a printer HP Deskjet 2540 - it prints if I connected a USB cable; However, he refuses to print if I try to print wireless.

  I had initially solved this problem when I went into system preferences > printers and Scanners and noticed two 2540 Deskjet series icons in a window titled 'Printers '. I ended up removing one of these icons and set it as a default, which temporarily seems to solve my problem. Now, I see two icons back in the "Printers" menu and my printer refuses to print over my wireless connection.

  My printer is connected to my internet connection so I don't think there is a problem here - I also recently installed the software for this printer to make sure it wasn't some kind of driver issue; However, it doesn't give me the permanent solution, that I'm looking.

  Any advice? My operating system is OS X Version 10.9.5

  Hey @love2dance,

  Please come back to me and let me know what you have tried.  I found an article by HP which has a more in-depth approach to troubleshooting your network configuration.  Click on the title of the article and start of Solution 2 and work your way down until finish you setting up your printer successfully:

  HP Deskjet 2540 and Deskjet Ink Advantage 2545 Printer Series - "Can't find printer" Error Message appears on the computer for a wireless network Installation

  Note that the steps are for Mac OS X 10.8 but you will find that again, as they apply to your configuration of Mavericks.

  If this set of troubleshooting options is far from establishing the connectivity Mac and printer, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Better luck with this and have a great weekend!

• Printing problems with my HP LaserJet 3200

  I'm having a problem with my HP LaserJet 3200. Or maybe with my laptop? Sometimes when I try to print, it shows an error in the printer status area and no ready button flashing on the printer. If I cancel the print job, disconnect the USB printer for 5 to 10 seconds, plug it in again, and then click Print - it works. I can print, copy and scan, so I'm hesitant delete the printer and add it again. I use Windows 7 64-bit. I have the above work around, and this may seem trivial it will work eventually, but I was wondering if anyone has any ideas to solve the problem. Thanks for your help.

  Hi Jwill,

  Thanks for posting on the Microsoft community

  We understand that you have problems with printing. We would be happy to help you with the problem. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates. This tutorial does not cover printing problems related to specific applications. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  In order to better help you, please let me know some details:

  What is the error message you get when the printer no longer works?

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: delete the printer spooler and select the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
   
  Method 3: you can follow the link that will help you solve the problems with the printer below.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please reply with the results so that we can help you.