Printing problems using the new premium photo paper more HP

Similar Questions

• large format HP 7110 prints come out too dark when using the choice of photo paper.

  My officejet 7000 would be to print borderless photos size beautiful poster even using a brand off paper. (Staples brand)

  But my new 7110 printer prints much too dark.  I choose the option "other photo paper.

  Hi @Ratboy2k Sunshyn here for help.

  I see that you're having trouble with your 7110 newly purchased. If your photos appear darker when you used the 7000 all programs? Have you tried to change the settings for print quality? You may need to change the quality at the standard. With the help of high quality may cause more ink on the page, your impressions would therefore appear darker.

  It could also be the selection of paper. Even if you are off mark paper, you don't have to choose "other photo paper. What are the options available in the selection of paper and what kind of paper do you use? I understand it of paper Staples, but must have a particular type as advanced, or premium and so on.

  I would like to do everything I can to help. Please post back with the requested details and I'll gladly come back and work with you to find a solution. Thank you.

• 7110 wide: cannot print on Premium Photo paper more than 11 x 17 HP

  I bought this printer to make great pictures. I bought the HP Premium Plus (11 x 17) photo paper at the time of HP and it worked very well. Now, the possibility to print using this document is not available in the list of driver paper. In fact, only plain paper is available as an option at this size. I renewed the pilot and recently updated the firmware of the printer, but noting the changes, the paper types in the pilot.

  Terry

  You are absolutely right! It isn't that I was using the wrong driver. Rather that I didn't fall down. After choosing the right type of paper, the other dropdown says that this tabloid (low-margin) is available. It is a size of 11 x 17, worked perfectly and the result was superb as usual.

  I'll have to use this printer more often so I remember how it works!

  Thank you

  Terry

• HP Photosmart D5460 printing problem using the cd/dvd tray

  Just bought a HP Photosmart D5460 solely for printing cd/dvd directly on cd/dvd labels.

  The problem I have prints a label on a Verbatim CD Vinyl.

  It is a normal 80 min CD - r but with an edge of vinyl and a 70mm print Center.

  When put in a fake cd (12mm diameter) cardboard, printing is excellent, exactly as it should.

  But as soon as I put in a CD of vinyl, the label is printed below the disc on the disc tray - holder, approx. 80mm below the mark where it should be.

  It drives me crazy, that everyone has seen this error before?

  Calibration is not help me... Also used almost every label possible software out there (Surething, Acoustica, Nero and Photoshop plain) who all give me the same result.

  Yes, I think that's the problem.

  I cut out a circle of plain white paper, which is the size of a cd and cut out the Center (a little more fat then 70mm of the printable area of the disc). Put on vinyl with tape adhesive tape and now it prints exactly on the label, to make it work.

  The black color of the disc must be the problem.

• Printing problems with the new HP Deskjet 2544

  I just bought a HP Deskjet 2544, and it appeared to install fine.

  I could print the diagnostic report, alignment page and test page, etc., but when I got to print anything else, although he looks like he gets "ready to print" and the green line would go up 100%, nothing came out of my printer.

  Trying to solve this problem because on the last 4 hours and I'm going out of my mind! I tried HP online support, Windows supports, uninstalling and reinstalling.

  Someone at - it ideas? Thank you.

  Hello NatTwibbler,

  Welcome to the HP Forums!

  I understand that you are unable to print a document using the Deskjet 2544. I will do my best to help you! First, what is your operating system on your computer? Click here to read: Windows.

  I recommend the continuation of this entire HP document on print jobs are stuck in the print queue. Try to restart the print spooler that according to the document.

  Please post your results, I'll be looking forward to hear from you.

• Ink not drying not on HP premium photo paper more

  I have a printer all-in-one HP Envy 5530 - purchased new less than 6 months ago.

  New HP - #61 black and tri-color ink cartridges #61

  New HP Premium Plus Photo paper, gloss soft finish.

  I am printing of photographs (black + white and color photos) and ink does not dry. I print the right side of the paper - it's easy to say that there is an HP logo on the wrong side. The ink comes immediately on my finger with the slightest touch, even after the hours have elapsed. I had a HP older and never had this problem. I appreciate any suggestions that I am an artist and need to print images that just won't get dirty when handled.

  Have you selected the correct media type?

• I have problems using the new adobe flash update that I just downloaded.

  Some sites are not allowing me access to what I download the most recent update for adobe flash. So I did, but afterwards, the websites are not recognizing that I have. I didn't know if it was you or the other Web sites. haha I'd really prefer not to start using chrome so please help if possible.

  Well Chrome is a good browser.

   After you closed Firefox and ran the update, it then should have finished and opened the default browser to the Adobe web site that has a spinning box, this will say you are up to date. Did this happen for you.
   If so then I would check Windows list of installed program and see if you have flash and see if that date corresponds with the day you updated. The version number should be 10.3.183.7
  

• printer problems with the new version of el capitan

  Since I've updated, I can't print!

  Tell us more by the love of God.

• HP ENVY 4504: Micron WILL NOT GO BY PRINTER KODAK PREMIUM PHOTO PAPER 280 x240GM

  My HP ENVY 4504 printer will not feed Kodak premium photo paper 240 gms through

  Hello

  First if you please the way you load photo first papers. Have you tried HP papers with the same thickness? Please check your loading process using the following Manual:

  http://h10032.www1.HP.com/CTG/manual/c03784120.PDF

  Kind regards.

• My Vista computer has ceased to be able to print or use the windows photo gallery, or to be able to perform updates.

  Original title: non-functional computer

  my vista computer has ceased to be able to print or use the windows photo gallery, or to be able to run updates and I can't find any way to put this right - someone had something similar - it custom install service pack 2 for vista and it wont let me download a update Internet explorer 9 - also stop the program index - continues and the print spooler said it works but it doesn't will not print - any ideas?

  Hi John,.

  1. you receive messages or error codes when you try to print or to use the Windows Photo Gallery?

  2. What is the code of error or message that you receive when you try to install service pack 2 and Internet Explorer 9 download?

  3 did you recent hardware or changes to the software of the system?

  You try to perform a restore of the system to a restore point before you have been affected by the problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following articles:

  System restore

  System Restore: frequently asked questions

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• HP Deskjet 3540: Unable to print documents using the HP Deskjet 3540 (network)

  I am printing documents using the HP Deskjet 3540 of difficulty.

  All options in the print dialog appear to be blocked.

  I've uninstalled and reinstalled the software nothing works. HP Print and Scan Doctor offers no help.

  Screenshot below

  Any help would be greatly appreciated.

  

  X-23 you are the boss.

  I followed your steps and was able to print a test page for Word, PowerPoint and PDF. I also printed a picture on plain paper in full transparency. I was also able to quickly implement the project and printed without a problem.

  I have not tried to print a photo on photo because of the low ink level paper but I'd be surprised if I'm not able to.

  Thank you for your kind and your patient attention to the problem I was experiencing.

  It's really appreciated.

  Prosperous 2015 for you and yours.

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!