printing with deskjet 3050 with the color cartridge

Similar Questions

• HP 4480 print with the color cartridge only.

  The all-in-one Deskjet printer copied a page and printed it happened to be all black text, and I did the copy without using the computer.  When I tried to do the same thing with the second page, only a small symbol of color in this page appeared on the paper.  I tried a new black cartridge, without result; the alignment sheet was only the blue rectangles and an arrow pink.  I tried to clean the printer heads and saw only the colored rectangles, not blacks, on the test page.

  There are a few spots on a page where the ink is gray instead of black, but everything is readable.  Maybe I soaked too long cartridge.

• HP Office 6100: Print with the color cartridges or exhausted?

  Hi, I recently bought a printer, but the color cartridges are empty.

  Is it possible to print in black & white, then they are showing email...

  Either by removing disable them them or the software must have color available, even if only need black & white document printing...

  Thank you

  Hello

  Need ink for the printer to use, to ensure that the functionality of the system and avoid the clogging of the print head.

  You must replace any empty color printing as listed in the following document:

  http://support.HP.com/us-en/document/c04331666

  Shlomi

• HP 5530: Black-and-white printing with no color cartridge

  Two questions please.

  (1) this printer print black and white if the color cartridge is empty or not placed on printer at all.

  (2) I have been using HP 61 XL.  Is HP 61 the same quality as HP XL 61

  Thank you.

  Hey @Kathiebronx,

  I see that you have questions about the desire 5530 e - all - in - one printer. I can answer those for you.

  (1) the 5530 envy has a system of two cartridges so it will print with a black cartridge in the printer.

  (2) 61 and 61XL cartridges are both HP cartridges. The printer must be able to print with the same quality that you were using a regular cartridge or a cartridge XL.

  I hope this helps to answer your questions and I hope you have a great week!

  If this resolve that your problem then please let others know by clicking on accept as Solution on my post.

  If you appreciate my help so please inform other users of the forum by clicking on the icon below my post thumbs up.

• Photos are not print with the photo cartridge

  Hello

  I have a Photosmart e 7510 and am trying to print photos.  I have installed HP Premium paper and HP Photo cartridge installed.  When I print the photos that are green - I printed both a progress report and a report of print quality and the cartridge photo is full but the magenta is empty.  It seems to me that the photos are print with regular color cartridges and not the photo cartridge.  Or photos using all the cartridges?  I correctly on all the printer settings and chose to 'better' than the quality of the photo.

  Any help is appreciated...

  The photo cartridge is just black photo, which is used to improve the nuances of black and colors in a photo. When photos are printed colours would be used to create the best possible performance. I could replace the magenta cartridge and printing resumes and see if that solves the Green tinting the problem you are currently experiencing. I hope this helps.

• Photosmart C310: What models allow a black-and-white printing with low color cartridge?

  I'm looking to replace my old HP Photosmart Premium all-in-One printer, because it works with reliability more. My biggest problems with this model are:
  1.)
  I can't print in black and white when one or more of the color cartridges must be replaced
  2.)
  The black ink cartridges work only sporadically. I lost a lot of money on the black ink cartridges that do not work, and I tried all the techniques of troubleshooting many times and no solution.
  3.)
  I hate having to spend $100 + to replace the cartridges. It's such a scam!

  I have teenagers who need the ability to print the homework on a very regular basis and in a timely. I can't spend another frantic morning, trying to get a printer (with new cartridges) to print!

  I hope someone with a knowledge of the range of HP products can explain different types of all-in-one printers available to me... and which would be best suited to my needs. Ideally, I'd like to find one that allows to print in black and white ONLY when the color cartridges are low or exhausted - if there is such a thing?

  Thanks in advance for any info, tips or advice anyone could offer!

  Hi @katvit74,

  While I don't have any specific purchasing advice @katvit74, I can offer a few troubleshooting tips to see whether your printer is at the end of his life.

  You're not the first to express frustration at having to have impoverished the cartridges replaced to continue printing. Personally, I suggest to use grayscale options, when printing so that the colored inks not so quickly adjust upward. Frankly, after reading your post again, I feel that you don't have want to solve your Photosmart Premium.

  I value your time and do not want you to feel like I don't have. That being said, we will encircle your initial request. Maybe you would rather a system printer for 2 ink that the cartridge supports single mode, or maybe a Laserjet that prints black only. The printer you choose should be based on your needs. According to me, the best way I can help is to offer you the tool product Advisor.

  Tool advice product is designed to target the product most suitable for your particular needs. Please answer all questions to give us the most complete picture of your needs - more information you provide, the more efficiently, we can recommend.

  Here is the link: help me choose a printer

  If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

• Uneven printing with the new cartridge

  I have a Color LaserJet 2605dn printer and have just replaced the magenta cartridge - previous leaked toner in the printer.

  The new cartridge does not print evenly.  It is the color at the center of the page, gradually fading to almost nothing on both sides.  I printed several pages and gave the cartridge a series or shake well, nothing helps.  The other cartridges are more than half full and print perfectly.

  This suggests a problem with the new cartridge?  Or is there anything else I can try?

  Thank you.

  See attachment.  Not for the faint at heart.

• D7360 does not print in "Black Only", unless the color cartridges are also not empty

  I try to print a document in grayscale mode with Photosmart D7360 printer.

  In the Print Setup dialog explicitly checks the possibility of using 'Black Print Cartridge Only'.

  The printer refuses to print, in saying:

  «The following ink cartridges are empty: Light Cyan.» Replace the ink cartridges to resume printing.

  "The printer doesn't have enough ink to ensure printer health. Empty ink cartridges need to be replaced to resume. »

  This means that even if it does not use the color cartridges, each of them must be non-empty when the printer is in operation?

  Yaro says:

  Thanks Zacabeb!

• DeskJet 2132: Do not print with the new cartridge

  I bought this printer only about a month. I've exhausted the original black ink cartridge, so I bought a new one (genuine HP 63XL).

  I installed the new cartridge and the alignment page is printed, but only the parts of printing color, no black. I tried to print a test page, once again, not black. The ink level software shows that the new cartridge is full.

  I tried to put back the cartridge several times and made sure the protective film is removed completelu.

  I tried to remove the new cartridge to print mode single cartridge. The test page comes out fine; but, when I try to print a document in this way, the printer WILL NOT PRINT AT ALL. There is a little red light next to the black point near the power button.

  HI @saking88,

  Welcome to the Forums of HP Support!

  I see that you are unable to print black on your printer HP Deskjet 2132. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there is a problem with the cartridge of the printer or print. This document should help you determine the cause. Please, try the steps in the guide below, to see if we can get the impression in black again for you.

  HP DeskJet printers 2130 - color or black ink print do not.

  This document is for HP DeskJet 2130, 2132, 2134, printers all-in-one Deskjet Ink Advantage 2135 2136 and 2138.

• 3210 all-in-one - cannot print with the black cartridge with 2 empty color cartridges

  have 2 empty color cartridges - and print in black only (up to get the new cartridges) - any ideas?

  Brigadoon wrote:
  have 2 empty color cartridges - and print in black only (up to get the new cartridges) - any ideas?

  The Photosmart 3210 printhead a permanent.  You will need to have available in any color ink not to damage the print head.  Your only option is to get the refill for empty ink cartridges.

• DeskJet HP3512 Windows 7 can continue to print black-and-white if the color cartridge is empty?

  If my color cartridge is empty, can I continue to print in black?

  DeskJet 3512, Windows 7.

  HI oldtoot,

  You should be able to print with just the black cartridge installed.

  Here a link to the manual. On page 30 in details how to use mode single-cartridge to operate your printer using only a single print cartridge.

• C4100 printer all in one, to the power message "problem with the color cartridge.

  You are prompted to remove and inspect.  No evidence of damage. Reintegrated and same result.  Tried again

  cartridge but same result.

  See the troubleshooting steps described in this document, especially step 3.

  Cartridges HP or third party?  The latter usually have bad results for reliability, see the study here for the results of the tests.

• HP officejet 8500 has more will not print black and white because the color cartridge is low

  I have entered the property and set it to 'levels of gray' and 'use black ink only', but the printer still will not print because "the yellow ink cartridge is low.

  incredibly frustrating that the cartridges of color completely stop you from printing, even if you are trying to print in color.

  Proffessional OS-windows 7

  is there a known solution for this?

  Unfortunately, the printer does not print until the replacement of the yellow ink. There is no work around for low ink message.

• HPO D5560 not print with the black print cartridge

  Having a D5560 printer which stopped printing with the black cartridge.

  Thought it was the cartridge has installed a new (only use HP cartridges) no difference

  After thinking the Black just stopped - no phasing-out quality, etc..

  Ran the cartridge filter (all levels of cleaning) no difference

  Print well if I remove the black cartridge so that the Tricolor print black but it's only good to work around the problem

  I use this on Windows 8.1. It worked fine for months

  Can't think that I had installed recently HP driver updates

  I have a hardware problem?

  Thanks for any input

  See you soon

  Geoff

  OK, so it's weird.

  Just thought to connect my netbook windows 7 into the printer.

  It print very well with the black print cartridge.

  Sent a work computer Windows 8.1 and now prints fine in black of the black cartridge.

  Problem solved, but I'm losing the plot!

  See you soon

  Geoff

• Printing printer Lexmark 2600 problems - it prints half a line after replacing the color cartridge

  It prints half a line, if the top or the bottom of it and the cutting of the other party.  This happens on every third line.

  This started happening when I replaced a color cartridge and ran the alignment page.  Before replacing the cartridge, it prints very well (except that the color cartridge started missing).   When I noticed what was going on, I took both cartridges on and then put them back in and had to print the alignment again page.  Yet the problem persists.
  I checked the Device Manager, and my drivers are up to date.  I also checked all connections.
  Any suggestions are welcome.

  Oh boy.  I don't know what I thought.  It just had to unplugging everything & then reconnect them, turn off & on.  This took care of it - seems so simple now.

  I guess it was my new laptop which has the printer all confused.  Win7, my find of CL.

  Insofar as the Lexmark support, I have not yet that day.  In any case, it comes to X 2690 model I had for centuries, so I guess that support would be of any help.  I mean, the guarantee missed a long time ago.

  Thank you for taking the time to answer.