Printing with HP c4480

Similar Questions

• HP c4480 prints with a blue tinge in photos

  Problem of Strang. This printer prints several images very well.  Then started printing with a blue tint.  I installed new color and black ink cartridges with no improvement.  I used the suggestions of the HP user as cleaning the print heads and alignig all to nothing does not. I tried to print using different programs all without help.  Any suggestions?-ddh48183

  Hi again,

  Glad that it worked for you! Good choice of printer, sleek and stylish huh?

  Be sure to visit the new forums if you need help or you can contact HP Technical Support.

  Good impression!

• Paper jam in the printer hp photosmart c4480

  Paper jam in the printer hp photosmart c4480

  How do you get the A6 envelope to remove it?

  Paper jam in the printer hp photosmart c4480

  How do you get the A6 envelope to remove it?

  ========================================
  The following items may be worth a visit:

  HP Photosmart C4480 all-in-One Printer Troubleshooting
  Jams & feed problems
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=46315&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3418705

  Jam paper with HP Photosmart C4480 all-in-one. ?
  http://answers.Yahoo.com/question/index?QID=20090409194542AAZIhWS

• You can print with a 6s iPhone using a printer no Wifi

  How do you print with a 6s iPhone using the printer no WiFi?

  Hey,.

  I always got WiFi printers in my house and never had to deal with this problem personally, but the following CNET article seems to answer this question:

  http://www.CNET.com/how-to/how-to-print-wirelessly-from-your-iPhone-iPad-or-iPod - touch.

  My printer is a HP OfficeJet 7500 E910, which allows me to print from any wireless device and my printer is plugged only the power source.

  Also, I did not read the entire article carefully, but I would venture to say that if you have a cable to connect your printer to your wireless router, it should appear as a network printer. If your iPhone is connected to the same wireless network as the router is mounted, you should have this success. It would still be printing wireless from your iPhone, but just a different configuration.

  Hope this helps, and feel free to respond with thoughts or questions!

  Thank you

  Michael

• How to stop printing with each email source code

  All my emails that I get include several lines of code such as for example: fed1rmimpi209 ([68.230.241.24]) by fed1rmfepi103.cox.net (InterMail vM.8.01.05.15 201-2260-151-145-20131218) with ESMTP id <20150915210616.TWMS31792.fed1rmfepi103.cox.net@fed1rmimpi209 > to < ***@cox.net >. Tuesday, September 15, 2015 17:06:16-0400
  This print on my printer before the text message.
  How to remove this "trash" to appear?

  Thank you

  _{Edit: deleted personal information. (philipp)}

  Could check it out you here:

  On Windows, press the Alt key to display the bar menu if necessary:

  Display > headers

  It seems that you have 'Full' selected instead of "Normal". If you switch Normal, messages print with just the From/to/subject?

  For more flexible options, you can try this module (installed from the inside of Thunderbird): https://addons.mozilla.org/thunderbird/addon/printingtools/

• Printing with ps cc (2015.5) problem

  I had been printing since I bought this Epson 3880 Stylus Pro, at least once every 2 weeks to more than a year without any problems. I print directly from photoshop, last week I printed 2 images, isn't a problem. Until today, prints comes very evil. In 2 different images green appears in the shadows and like don't muddy not sharp or details. Very hard to explain, but you can see the result of printing with an attachment. Impressions are UNEXCEPTABLE.

  So I try to print from LR with a different image that I never print from LR before. And the result came out the same. Green and muddy in the shadow or the dark area... very sad... do not know what the problem is and really have no idea how to solve this problem.

  Can you please help?

  

  Have you tried taking this image and printing of another

  no Adobe app such as preview?  Are the results the same?

  Have you tried this printer with another computer/device?

  The last of them is important to determine if you actually have a printer

  hardware failure or if there is a corruption of software/driver on the iMac.

  The first step is to determine whether or not it is a problem for Adobe.

• Some PDFS are print with empty boxes, replacing the text

  I have some of my electricity and gas supplier invoices and invoices are printed with squares displayed instead of text. I have already restored the book of fonts for the default fonts. I have no problem with the display of these bills on my computer. I have another PDF files and they all are printed correctly. If I open the PDF file that is badly printed and export it to PDF in PREVIEW app, the output is the same as on my printer. I tried to restore all the fonts by default those and I tried to reinstall OSX update with update combo, always the same.

  What else can I do to restore the normal print mode?

  

  

  Any who have had the same issue guys?

• I can't print with my printer Epson and iMac

  I can't print with my Epson (Epson08EFAB) Although the news of State shows that it is recognized by the system.  My wife can print using his MacPro using wifi the printer system. I try to print from iMac results in the message "the printer is inaccessible at this time."  Because the printer does not print, I can only find that the problem is somewhere with the iMac itself or with the system (OS10.10.5). All other functions work (with the exception of Mail - another problem for another time). What lack me in my troubleshooting, or where should I look to get out of this problem?

  I can't print from my iMac, although the printer does not work with MacBook Pro my wife. I try to print from iMac results in the message "the printer is inaccessible at this time." I am running with OS10.10.5, but the problem existed before any upgrade. I ran through the process of system preferences, but it does not work.  I'm looking for clues as to how I should proceed.

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

  Troubleshooting network printer

  Ping printer: If you have the IP address of printers open the Terminal (Applications/Utilities) and at the prompt, type: ping {printerIP}. You will get a response or a failure.

  Solve printing problems

• Printing with Safari and Firefox

  Lately, some sites say that they do not support older SAFARI browsers. When I print something, print is extremely low, even with a new print cartridge.

  When I print with FIREFOX, printing is crisp but the print menu displays the pages. Therefore, I'm not able to select the pages I want to print. Is there a solution?

  Firefox uses its own printing Panel and has a button down, which will display the details display or hide details (abbreviated Panel). The ability to print _ to _ is available on the largest panel display details.

• How can Hello I set a default printer with JAVASCRIPT? or send directly to a printer, I am programmer

  I'm a programmer and I need to print the 2 files in 2 different printers (with labels Zebra and letter to a strong), I have the sharp or default Zebra printer when I send the file to print, this take the size default to the default printer and it is printed with this size, a letter as a label and a label as a letter How do I set a default printer in JAVASCRIPT or send a file directly to a printer by JAVASCRIPT?

  How your web application user initiates not print function?

  There are two distinct "Print" buttons on the page? One of the labels for Zebra and other print of the 'letter' to the strong?
  
  Or is it a function of sequential type, where the label is supposed to be printed Zebra and the 'letter' to the sharp in one operation of button "print"?

• Can't print with my MacBook Air to my HP Desk Jet 3050 after update of El Capitan.

  Can't print with my MacBook Air to my HP Desk Jet 3050 after update of El Capitan.

  Have you run software update? That's what HP recommends that do you. I hope that he will find and install the updated software from there.

  Does your model listed.

  HP v3.1 for OS X printer drivers

• LasrerJet P2015n: Low error when printing with ePrint to a LaserJet P2015n on iOS supplies

  "Hi, I'm using the HP LaserJet P2015n, which works very well, however try to print using ePrint on iOS 8.3 seems to cause problems. If the application finds the printer on the network, and try to print, it invites a mistake "we have detected you are low on supplies error" obviously is not the case, because it is more than 50% of the full and prints very well using the desktop computer. The printer error LED keeps blinking and won't not even respond to a request for printing office. It must be restarted to work again.

  Tried all kinds of reboot and reset. I also tried to find a solution with no luck, there is no updated firmware for this printer can be found as well.

  Any help will be very appreciated!

  @hussain316

  Thank you, based on the information you provided... the p2015 is not taken care of with ePrint. That's why whenever you send a print job for printing, the printer responds with error messages and you have to pick up then power cycle the computers can be printed successfully on it.

  If you want to start mobile printing, then you will need to upgrade to a new printer with function ePrint. Depending on your price range, the new m277 is a nice little printer and has this ability.

  Sorry

• How can I get my Konica Minolta 2430 to print with os 10.11.3 on my new mac mini

  How can I get my Konica Minolta 2430 to print with os 10.11.3 on my new mac mini? I have seen several threads form 2013 on 10.9. someone knows something about 10.11.3. I'm a novice, was fiddling with used Mac for several years, but don't want to lose a lot of time to understand. Thanks for any ideas you may have.

  Konica says that the printer is taken in charge by El Capitan?

  Konica has drivers for this printer? If it's an old printer, it is not supported in El Capitan

  Maybe:

  Apple may provide drivers for older printers?

• mirror printing with an HP Officejet 4500 G510n-z?

  Can I mirror printing with an HP Officejet 4500 G510n-z?  I don't see the option in the print properties.  just need a confrim.

  Thank you!

  Kath22, it is not a feature available for this model.

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result