printing with the new wireless router

I have a HP 8600 printer. How can I change the printer to recognize a new router. I printed the configuration page and the new router is on the list but I can't find where to change the printer so it will use the new router

Hi @riverfront36

I can help you set up your 8600 with your new network. Please use the following document to solve the problem and I would like to know the results of your efforts; Connection of the printer after you have changed your wireless network.

I hope this helps.

Tags: HP Printers

Similar Questions

  • 3050 will not work with the new wireless router

    I've been using a Deskjet 3050 have used wireless for my laptop.  I used a wired connection to my desktop computer.  I had to change my router from Verizon, and when I did I can't the 3050 to work wireless.  When I try to enter my new SSID he says he cannot locate. Someone has an answer for this?

    Hi garybeafl - have - you looked on the HP support site or the answer? Not knowing the exact Deskjet 3050 printer model you are using - I looked here- I hope this helps.

    If this isn't your model, simply search for you exact model (there are at least 5).

    Good luck.

  • Working Group stopped after the installation of the new wireless router

    My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

    I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

    I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

    WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

    The network path was not found.

    I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

    What version of XP you use (Home or Pro)?

    Can you access the Win 7 a XP computer?

    You have identical accounts, passwords on both computers?

    If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

    So... What is the name and version of your anti-virus program?
    What other security software is installed?

    On every laptop computer, open a command prompt window
    for XP: start > run > cmd > OK
    for Win 7: type cmd.exe in the search box and press enter
    In the black command prompt window, type the following command and press enter
    ipconfig

    Please provide the values for the following for the adapter wireless of each computer
    IP (XP)
    IPv4 address (Win 7)
    Default gateway

  • The photosmart c8150 print with the new ipad

    The photosmart c8150 print with the new ipad?

    Hi toddgas1,

    Unfortunately, this printer does not support Airprint or ePrint.

  • HP laserjet p1102w: wireless printer does not work with the new wireless network

    My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

    Hi Shlomi,
    Thanks a lot for the info. I'll give it a try today...

  • Can not get the printer to print with the new windows 8

    I recently rec'd a new computer with the new windows program (8). Printer works sometimes, but not all the time. The setting was listed as offline. I can't understand how to get online. I have sharing enabled. I entered the paraphrase wireless often - sometimes it prints a doc and no mmore. Other times it does not print anything. Can anyone help.

    Hi MargieSchellinger.

    I'm glad to know that you've posted queries in Microsoft communities.

    From your description, I can understand that you can not print in Windows 8.

    I understand that it must be frustrating, but don't worry, we are here to help fix your problem and guide you in the right direction.

    Could you please answer this question so that I can guide you in the right direction.

    -What is the number of brands and models of printer?

    I want you to try the following method and check.

    Method 1: If the printer is offline, then try the following steps to connect to the network.

    With the right button of the new queue in printers and faxes tool and clear the printer offline use setting. This resets the registry key to the correct value.

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution.

    Method 2: Please follow the links and instructions mentioned in the link to fix the problem with the printer.

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    http://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

    Method 3: Follow the link which provides instructions on how to install a printer.

    http://windows.microsoft.com/en-US/windows-8/install-a-printer.

    Method 4: To connect printers please follow the link and the instructions mentioned in the link.

    http://windows.microsoft.com/en-US/windows-8/add-device-or-pc-to-network.

    Hope the above information helps.

    Do get back to us and let us know the State of the question in the case where you need further help or your next post.

  • HP Design Jet T920/T2500 Pages can be printed with the new HP 727 130 ml.

    Hi guys,.

    I want to ask you how many Pages can be printed in the new HP 727 130 Ml of INK CARTRIDGES. Normal, black and white printing on Hp Design Jet T920/T2500. One of my customers asking me this way, I'm looking for and read about the manual but this is not to mention the approximate number. pages can be printed. I appreciate who can help me and share their experience with this concern.

    He mentions on the manual which:

    Can be printed 120 Page A1 and A0 60 per hour, but HP 727 130 ml (returns/Pages)?

    Thank you and advance...

    I doubt that there is no information for this because inkjet printers work differently then laser where they use a percentage of coverage for compiles the approximate pages toner. With Designjet printers there are many variables outside coverage that would be very difficult calculations. You will be dealing with page sizes and even with normal printing or graphic images line densities will have much to different amounts of ink laid according to the original plot, type of paper used, etc.

  • Uneven printing with the new cartridge

    I have a Color LaserJet 2605dn printer and have just replaced the magenta cartridge - previous leaked toner in the printer.

    The new cartridge does not print evenly.  It is the color at the center of the page, gradually fading to almost nothing on both sides.  I printed several pages and gave the cartridge a series or shake well, nothing helps.  The other cartridges are more than half full and print perfectly.

    This suggests a problem with the new cartridge?  Or is there anything else I can try?

    Thank you.

    See attachment.  Not for the faint at heart.

  • HP 6980 printer - cannot connect wireless with the new modem/router


    You're right, that it was not easy... 4 first steps worked well and then fell on a problem with the hpsetup, because it was not on my computer.   Download drivers and software Web site, such as the drive no longer works (I have Vista Home Premium 64-bit).  Doctor of the printer does not work either... in any case it is configured now, but it took about 30 minutes to complete the configuration of the printer.

     
  • HP Envy 4500: Cannot print with the new Wifi

    I have a new Netgear09 router and everything connected correctly. My HP Envy 4500 wireless printer has been a success with the wizard, and I printed out the specs very well. My computer (Windows Vista) is connected to the Internet fine... but when I try to print a document from the computer it continually-error. What Miss me? I am able to print from my Ipad... but not the PC.

    Welcome to the HP community @Dmk3,

    I understand that you can't print from your Windows Vista system to your desire of 4500 from the evolution of your router. I would like to help!

    Try running the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please send me the results.

    Try to print again, and if there are problems or errors, please tell me what they say precisely and I'll read them for you! Also ensure that you are trying to print outs in addition to a program.

    Best wishes to you!

    Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

  • HP deskjet 6840 undetected on the wireless network after you have added the new wireless router.

    Belkin Wireless Router unfounded, implemented with WEP security, is dead. Replaced by Belkin new value WPA/WPA2 security is enabled.

    I can connect ok with USB, but I don't know how to re - enable wireless printing.

    Can anyone help?

    Hello

    To connect the printer to the network, you will need to use the PC. tehrefore knowing what OS you use will allow you to direct you better.

    If you are using Windows 7, you need to connect the printer with an Ethernet connection first, then enter the pritner EWS page to configure the wireless connection.

    You can find the exact measurements below:

    http://support.HP.com/us-en/document/c01943577

    For Windows XP or Vista, please follow the steps below to connect the pritner to your wireless network:

    http://support.HP.com/us-en/document/c01835115

    Kind regards

    Shlomi

  • Can't print after installing new wireless router

    Replaced the wireless dsl router and 8600 OJ Pro printer no longer works.  Tried to find a way to add password/key router for printer and nothing does.  Any suggestions will be greatly appreciated.

    Hi bjzatx,

    Follow the steps below.

    1. press on the icon on the Control Panel printer wireless

    2. press the settings button

    3. scroll down and press the default network

    4. http://support.hp.com/us-en/document/c02886889 

    5. Once you have the printer connected to the new router, you will need to go program - HP - IP address files update and then enter the new IP address of the printer until the software see the printer.

  • OfficeJet 4500 G510: officejet 4500 does not print with the new computer

    Bought a new lenovo so it of a new computer running Windows 10 and cannot get printing to work with her.  He moved with a wired ethernet, or even wireless, but does print the test page or anything like that.

    Have uninstalled and reinstalled several times without success.

    Tried to install with a USB cable and that crashes, even bought a new cable and still nothing.

    I put off and then to refresh the printer and that did not help either.

    Installing updated drivers and the computer sees the printer and says it is ready and works fine, but do not print.  Convenience store can't find no problem either.

    The printer works perfectly with my iPad in the next room is not the printer.  So for now I have to send my documents to myself and print from the iPad, which is annoying.

    Any thoughts?

    Thanks in advance

    HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

    Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

    When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

  • Unable to connect to the drop folder digital network after the installation of the new wireless router

    I have already scanned to the folder of network of digital repository on a printer HP 8500 wireless, connected to a wireless G home network. However, I recently bought a new superisolants wireless router and am no longer able to use the scan function. I now get an error message that says: unable to connect to \\Computer\Folder Make sure the remote computer is turned on. The printer on the wireless network and works very well except for scanning to the folder of the network of Direct deposit. Thank you.

    I called HP tech support last night that had me add IP address of the printer to the McAfee Firewall as an approved connection. Digital archiving to the network folder scan function works now.

  • 3630 air print: 3630 to new wireless router connection

    Hi, I changed my router, and cannot get my print printer 3630 look to connect with my I pad any help appreciated

    Thanks for the reply, however the solution after a lot of research, is press the wifi button and cancel on the printer for three seconds to set the printer mode, go to the wifi settings on iPad select printer say's in the fashion game, return to AOI app and follow the instructions, insert the new password to router and printer will recognize network.

Maybe you are looking for

  • How can I change screen resolution in firefox in 1280 x 720

    Recently, I switched to windows vista ultimate.I installed firefox 4.0.1.When I open firefox the screen resolution goes to 1280 x 720 to 800 x 600 (or 640 x?).How can I fix so I have 1280 x 720? If I have to can use Win Explorer how I transfer my fir

  • FF 4.0 incompatible with Norton 360. How can I uninstall 4.0 and back to 3.6?

    I want to leave FF 4.0 and go to the old 3.6 version because I can't use Norton 360 I absolutely need and rely on. Can someone send a link on the 4.0 uninstalling and reinstalling 3.6?

  • X220i and INF files

    Hi can anyone help, I am trying to picture about 100 laptops above using 'Windows Deployment Server'. To get the server talk to the laptop, I need to inject an INF file in the server. My problem is what file INF do I need, because there is so much an

  • failure to logon with the administrator account

    I am unable to log in with my personal account password - answer 'service user cannot logon profile' and 'impossible to load the user profile' suggestions?

  • My bb bold blackBerry smartphones get more heated and stops loading

    I have a bb bold 9780 which is about 9 months old... recently I started having this problem with my battery to reach extreme temperatures of 45 c and then sign shows a card that supposed to happen when my battery is fully charged, but gets to 40% and