Prnter all-in-one HP 5740e: Officejet 5740

Why Hewlett-Packard does not mention the use of the memory card in the "area of device memory"? The "area of device memory" is shown on the schematic design of the printer in the User Guide, but there NO instructions on its function or job, NO mention of which adapter to use and NO mention of this in any part of the Index in the User Guide. The 'memory card box"also contains a USB port at the front of the machine, but there is no mention of its functions in the printer. Can anaone tell me how to get this information?  Customer support seems to be helpless in this matter.

Page 42 of the User Guide.

Tags: HP Printers

Similar Questions

  • 5740 OfficeJet all-in-one: language for Officejet 5740

    I bought the device HP all-in-one Officejet 5740 on ebay to Italy but no menu Greek. Is there a way to solve the problem!

    Thank you.

    Hello

    I'm not afraid,

    Printers are manufectured for a specific market, a printer purchased from the Italy will have all available languages...

    If the Greek is not an option in the menu, it cannot be added to the printer.

    Kind regards

    Shlomi

  • E-all-in-one printer, HP Officejet 5740: duplexing for Officejet 5740

    I recently bought an all-in-one Officejet 5740 printer. I knew that duplex automatic was a defect and not an option. I can't find a way to change to 1-sided (there no selection in the properties). Is there an allowance for 1-sided printing to this printer model?

    Hello

    The application used to print, open the print dialog box, and then click Properties / Settings / preferences to access the Printing Preferences dialog box.

    In the Layout tab set duplex printing as Off, confirm the changes and try to print again.

    In addition, in Control Panel open components and Printersm click the right button the printer icon and select Printing Preferences.

    Make sure that the same thing as two-sided printing is disabled to ensure that it is disabled by default.

    Kind regards

    Shlomi

  • E-all-in-one printer, HP Officejet 5740: Fax over Internet Protocol

    Can help you find reasonably priced FoIP for faxing?

    EFax has been around for years.

    https://www.eFax.com/

  • HP Officejet 7310xi all in one: the HP Officejet 7310xi all-in-One Printer-t - y at - it a hard drive?

    The all-in-one printer HP Officejet 7310xi contains a hard drive?   So if, for the purposes of recycling how to remove or disable otherwise?  Thank you.

    There is no hard drive in the Officejet 7310xi.  Verify that no memory card is inserted in the memory locations in the lower right front side of the machine.

  • Scanning continues to not work for Mac OS 10.6 and 10.7 for all-in-one printer, HP Officejet 6110

    Scanning is broken in Mac OS 10.6 or 10.7 for all-in-one printer, HP Officejet 6110. It seems that only old versions of Mac OS will scan. I realize than products account "age" but it's really - poor behavior that HP and Apple cannot support such a function based on a very popular printer.

    Information on scanning support is circular at best and misleading at worst. A Bulletin Board suggests the purchase of a third party program to do the scanning 'work' for the Mac. Terrible.

    There should be a patch for it. It is really unacceptable and tarnishes the reputation of Hewlett-Packard and Apple.

    (Forgive me if this sounds like a sales pitch, it is not intended to be, and I'm not in the sale by any means - it's just the logical thinking process, I would in your situation).

    Option 1: Get Vuescan

    Pro - you can scan... as long as the printer is working.
    Con - given that electronic devices are usually only expected to last 5 years or more, your 6110 could go at any time, hence the need to upgrade. Improved printer support the most recent OS and the need of Vuescan would go, resulting in a loss of $40.

    Option 2 - upgrade
    Pro - new product will be compatible current OS with a complete solution, have more physical features than your current product and a warranty.
    Con - it's pocket money-, but looking at the Con in Option 1, you could potentially spend AND pay $40 for additional software, so in the grand scheme of things, it would be the least expensive option and best bang for the buck.

    These are my thoughts on this subject, take them for what they are worth. Whatever you decide, I hope everything is working well for you and happy that you have found an alternative solution (always nice to have more options)

  • All-in-one printer, HP OfficeJet 6210xi crippled

    I installed my portable printer all-in-one OfficeJet 6210xi more than 4 years ago. Everything worked well. About two years ago, I replaced my PC with WinXP Pro's home computer. Everything worked well. A few months later, I bought my wife a printer wireless HP DeskJet 6980 for his iMac. The installation was easier to run from my XP PC, so I have installed the software on the iMac and the XP PC, was the game of the XP PC then both the iMac and PC XP have been able to print to the HP 6980 wireless and the XP PC has been able to use all functions of the 6210xi all-in-one printer.

    Whenever there is a dialog box informing me of a software update for each printer on the XP PC or iMac, I accepted the update. Everything worked fine until a year ago, then the XP PC locked up in the middle of the scan of an image from the 6210. He had no other choice but to keep the power switch of the XP PC until the shutdown of the PC. "Windows Task Manager" can complete the task.

    When I rebooted, I got a message that Windows did not find file HPSoftwareUpdate.msi. I used Windows 'Search' to find the file, but the message rejected this file. For weeks, I have ' X'ed ' on the box dialog at every reboot and everything still worked fine, but one day, when I was offered a software update and I could not receive it. The company said that it lacked HPSoftwareUpdate.msi.

    I googled the problem and read that I have to uninstall and reinstall the HP software for the 6210. No help. I lived with the problem because everything worked fine, except that I could print is no longer to the XP PC HP 6980. The iMac has worked well with the 6980.

    Then the problems started. At the start, after that my desktop I get a box titled "Windows Installer", and then a second box: 'Please wait while Windows tries to configure library', then a dialog box "the feature you are trying to use is on a CD or another removable disk that is not available. Insert the disc of the photo gallery and click on OK. There is a drop down menu to 'Source '. If I try to 'Browse' the first thing that appears is the PhotoGallery.msi file in the folder C:\Windows\Hewlett-Packard\Setup Files Software Update\. I tried to click on the PhotoGallery.msi file, and I get a message that "the Update\PhotoGallery.msi C:\Windows\Hewlett-Packard\Setup of HP software is not a valid package for photo gallery. Try to find the PhotoGallery.msi installation package in a folder from which you can install Photo library". I tried to use Windows Search to find all other instances of PhotoGallery.msi, but I get the same message when I click on them. I tried to use the CD supplied with the printer. No help.

    I get an "error 1706. No source is valid for the product photo library is not found. Windows Installer error message cannot continue"when I exit the installation/configuration process. I have to cancel the process about 3 times before he left.

    My printer works fine as a printer and I can copy and FAX from the console of the printer, but whenever I get one sheet to FAX or copy, I get a warning sound and a message that the there is a problem.

    If I open "Image area" to try to scan a photo or a document, my albums are all absent and when I complete the scan, I get the same series of messages as when I reboot. The biggest difference is that the ongoing process of trying to repeat no matter how many times I Cancel. I have to use "Task Manager" to the "end task".

    I uninstalled the 6210 software and reinstalled several times. I used the CD that came with the printer and also the last driver downloaded from the HP Web site package. I uninstalled the software HP 6980. Nothing seems to make a difference.

    I think I have one or more of the following problems:

    #1. There is the uninstall process does not remove the files
    #2. There are registry entries that I need to remove
    #3. There are files for the HP 6980 in folders where there should be files HP 6210

    Does anyone know how to get all relevant files, registry entries and HP off my PC, apart from reinstalling Windows? I need to reinstall the software as if it was a first time install.

    FreddieVee

    First I ran the file gr_uninst.exe http://h10025.www1.hp.com/ 4 times. Then I ran msicuu2.exe the "Windows Installer CleanUp Utility" (I have the link that you provided = http://support.microsoft.com/default.aspx?scid=kb;en-us;290301) and finally I used the EasyCleaner Registry Cleaner from ToniArts v2.0.

    I decided to use the three programs rather one and then re-install and hoping that all this work.

    After re-installing, using the last package of driver for my printer HP and the combination of the OS, everything works like new.

    Thank you for your advice,

    FreddieVee

  • OFFICEJET 5610 all-in-one: PROBLEM WITH OFFICEJET 5610 all-in-one

    I used an all-in - One HP 5610 since 2008.

    A few days ago the printer stopped working and gave me "error: 0xd05d010d Reset power", the lights on the buttons 'ON', 'COPY', 'FAX', 'SCAN' and the 'QUESTION MARK' on the front panel are on.

    I tried each proposal given by other users, for example to remove cartridges, reset the printer with #3 or #6 or #9, remove usb cables and electricity... but no result.

    Finally, I am in front of a printer will not work for me, with all of the above, more continuous "beep" and removed cartridges.

    Is there other option/proposals to test?

    Tanks in advance for your help;

    Hi @pankal,

    Welcome to the HP Forums!

    I understand that you get the error: 0xd05d010d Reset power with your HP Officejet 5610 printer. I am pleased to see that for you!

    "Please make sure that the steps in this guide, ' 0xc19a0005" or similar error screens are completed.

    If this does not resolve the problem the printer will need to be repaired / replaced. Please Contact HP phone support for hardwareoptions. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I hope this helps!

  • All-in-one HP Officejet 2620: A5 format missing in the all-in-one printer HP Officejet 2620

    I use a HP Officejet 2620 all-in-one printer and I need to print some documents using paper size A5 format but not miss the formats available on the A5 format list box.
    I want to know if there is a way to define this format.

    Hi lucausa75,

    You are welcome!

    To answer your questions:

    I would recommend the HP Deskjet 990c driver, as it supports printing A5. When you change to this driver it can restrict your printer to print only as the HP Deskjet 990c is a printer function only. In order to restore the features of scanning, etc... You may need to return to the driver HP Officejet 2620. But it is possible that scanning, etc. may continue to work with the original drivers as well. The only way to know for sure is to try it and test it.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope that this answers your questions, and I thank you for posting!

  • All-in-one printer, HP Officejet 4620 blocks the laptop HP dv7t-7000 Quad Ed

    I have a HP Officejet 4620 all-in-one printer connected via USB to my laptop HP dv7t-7000 Quad Ed. This printer makes my laptop BSOD. Reloaded the driver and the problem appears after some successes of print jobs. Help, please

    Hello

    The port marked as number 4 is a USB 2.0 port , while the number 3 is a USB 3.0.

    Kind regards

    Shlomi

  • HP OfficeJet All In One 4635: HP officejet 4635 does not print

    Bought a new HP Officejet 4635 all-in-one today.  Installation is complete, do not print anything.  Run wireless on Windows 8.1.  The Test results wireless network print, says no problem found.  Unable to print from the internet, word or excel (from Office 365).  Already reinstalled printer twice.  I don't get an error message, the work appears in the queue but then disappears without printing anything.  I don't have Norton or MacAfee.  Help! I already spent all day fighting with it.

    HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

    Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

    When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

  • HP Officejet 6210xi all-in-one: a HP Officejet 6210xi all-in-one printer can be connected wireless?

    does anyone know if the hp 6210 xi all-in-one can be converted into a wireless printer as well as a wifi network can access and mobile devices?

    Hello

    The HP Officejet 6210xi is one USB printer, it does not offer nay network connectivitu and along such a is not supported.

    You can find the printer specifications below, as listed in section system requirements only a USB port is available for the printer:

    http://support.HP.com/us-en/product/HP-OfficeJet-6200-all-in-one-printer-series/391210/model/391212/document/c00228331#AbT0

    Shlomi

  • E-all-in-one printer, HP Officejet 4630: history of instant ink HP

    When I go to my account and trying to figure out how many pages I printed since the first installation of my printer HP Officejet 4630 e-all-in-one, it does not give me this information.  Is it because I have not installed the new instant HP replacement ink cartridges that were sent to me after that I signed up for the program?  I always use the cartridges supplied with the printer.  If I put the replacement cartridges, it will start following my impression?

    @marlmr

    Welcome to the Community Forum of HP.

    The answer is, "I think, Yes."  The smile.

    I do not use the service, although I recently ask you a few questions about it when I had the chance.

    I remember well:

    Instant ink cartridges are not magic; they are different from ordinary ink cartridges, and there is a way by which the service is able to keep track of the use of ink.

    To get credit, I think that you need move to your new cartridges.

    =============================================================================

    See the FAQ below, including information on the "bearing".

    Information - FAQ:

    Connected HP - Instant ink

    Click on the thumbs-up Kudos to say thank you!

    And... Click on accept as Solution when my answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • all-in-one printer, HP Officejet 4315xi range & hp Pavilion with Windows 7

    Printer has said he is ready and he is printing of the document that I send to print, but nothing happens. does not print.  I ran troubleshooting program.  Have tried everything I know without success.  Can you help me?
    Thank you

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Good luck, you need to update or reinstall the latest driver.

    HP Officejet 4315xi all-in-One Printer - drivers<- set="" to="" your="" version="" of="">
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1138347&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP Officejet 4315xi all-in - One Printer - support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=1138347&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • All-in-one printer, HP Officejet J5780 problem

    Printer all-in-one HP Officejet J5780 quit recognizing the color cartridge.  It prints only something black.  It is connected to a computer laptop w / Windows 7/64 bit. I downloaded the latest driver on the HP site.  We also made the cleaning process.  The cartridge ink level shows a lot of ink.  Any suggestions to fix this?

    You may have a faulty cartridge.  Since you have manually wiped the contacts of the machine and the printer, the next step would be to try a new cartridge. I understand however do not want to try this immediately. A way to try to clear the error message and restores the printer to a well-known condition, if possible of the to do.

    Here are the directions for a hard reset.

    1. with the printer plugged directly into a wall outlet and turned on, unplug the power cord from the back of the printer.
    2 then unplug the power cord from the wall outlet.
    3. wait at least 30-60 seconds
    4. plug the power cord into the wall outlet first. If a module with the power cord, make sure that the light of the module and then reconnect power cord on the back of the printer
    5. the printer should power back on by itself, but if not use the power button on front panel to turn on machine.

Maybe you are looking for