Pro Late 2011: Force Quit applications or shut down/restart computer.

Similar Questions

• Trackpad MacBook Pro late 2011 does not not after upgrade

  I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

  Hello Med_,

  Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

  You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Reset the management system (SCM) controller on your Mac.

  If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  See you soon!

• Can I put OS Lion directly to El Capitan without an intermediate upgrade. I have a MacBook Pro late 2011. Safari no longer works on a lot of web content with this OS not.

  Can I put OS Lion directly to El Capitan without an intermediate upgrade. I have a MacBook Pro late 2011. Safari no longer works on a lot of web content with this OS not.

  Yes.

  (143974)

• Drive hard internal update for MacBook Pro Late 2011

  I want to update MacBook Pro (late 2011) to a SSD drive, but I do not have what to choose. I have my eye on 960 GB SATA III, but I don't know if it's ok to use a greater than 512 GB SSD and SATA III ok?

  Any advice would be appreciated. Thank you.

  Yes it's OK to use a size larger than 512 GB SSD, and Yes, SATA 3 is OK.

• MacBook Pro (late 2011) heat a lot!

  Hey guys,.

  M Macbook Pro (late 2011) heat a lot! Especially when I use Photoshop, the fan make a * lot of noise!

  Pointers?

  It seems that your iPhone is also hot. You use the devices in a hot environment?

• What external DVD burner for MacBook Pro late 2011

  My internal superdrive drive just died, a kind of inner part rattling... sounded like a trombone bouncing around. Has to be replaced. Wanted to buy an external drive of Supe but it won't work with my MacBook Pro late 2011. I need to burn DVDs for my students and have no desire to kill an other intern. Any suggestions on a good external draft horse?

  et-we-take-look-at-Apple-SuperDrive-alternatives-3500390/ http://www.Macworld.co.uk/Feature/Mac/What-Mac-compatible-DVD-r-Drives-Can-You-g

• Double disc SSD/HDD on MacBook Pro late 2011

  So I finally finished putting my double drive on my MacBook Pro late 2011. I ended up putting the SSD where the optical drive has been, since research told me that the end 2011 MBP is the lucky model with an optical drive that supports Sata III. If anyone can give me a reason to spend my SSD and HDD, please let me know.

  Anyway, now I ask to help with setting up my macbook pro to use two disks. I copied everything on the SSD and the SSD drive is set to start my computer to the top. I can already tell that this thing is so much faster now. However, I basically just have two exact copies of my all my stuff on the two disks. How can I configure my computer to know which drive to use? I want a few things to use my HARD drive and other things to use my SDD, not all at once. Where are these settings and how to do?

  Thank you in advance!

  Hi Jdsr4c:

  I have a Macbook Pro 2011 start.

  I installed a 500 GB Samsung 850 EVO instead of HD.

  I moved the HD to the optical Bay.

  Optical Bay has 3 Gigabit speed. HD space has a 6 Gigabit speed.

  See the screenshots of my mac.

  

  

  The old HD, I would reformat is not bootable.

  I use my old HD for storage of movies, etc.

  So for example, I'll download a movie and then move it to my old hard drive. I'll put it in a directory named for example movies.

  On the SSD, I'll do an 'Alias' pointing to the movies on the old HD directory (on windows, it would be a shortcut).

  In any case, hope this helps.

  Kim

• Windows live quickcam pro 9000 when try to record vidio computer shut down restart

  Logitech Quickcam pro 9000 v-ubm46 window live... Quick capture... take a picture Yes... When try to record vidio computer shut down & restart

  Window xp pro served pack 2.2002 quickcam v11.8

  Suggestions appreciated thank you for research

  had no any error message the computer just black screen close

  Sorry, the problem is with the Quickcam capture

  Thank you for your help

• When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Original title: closed to stop forced mediacontextnotificationwindow

  I'm having a problem with a 'program'... ? When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the exact message?

  Perform the clean boot may help you resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• Cannot shut down the computer properly

  * Original title: trouble

  Can someone help identify me the programs running on the computer? He informs me always force shut down the computer because some applications running behind. Since I could not know all the applications running on my taskbar... Y at - it an idea to browse all running applications so that I can all be closed before shut down us my computer?

  Hello

  1. What is the exact error message?

  2 has there been recent changes made on the computer before the show?

  Please try to update us with the results and the methods provided below.

  Method 1: Perform the clean boot and check

  It may be that a third-party application is causing this issue. Put the system at boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Run the patch section and check if it helps.

  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

   

  For more information, see the articles and check out them.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Turn off your computer properly

  http://Windows.Microsoft.com/is-is/Windows7/turning-off-your-computer-properly

  Let us know if it helps!

• Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day.

  Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day. And they did so why they keep needing to be updated? They are: a security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864) and: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2539631)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  UTC/GMT is 16:02 Friday, September 23, 2011

• Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

  Question asked by Neil Clark (me)
   
  I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
  Sunday, August 22, 2010 01:54

   

  Windows Live K - Ann C response.

   

  Hi Neil,

  This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:

  
  Important: before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

  Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.

  
  BACKUP REGISTRY KEYS:

  1. click on Start, click on run

  2. type regedit and click Ok

  3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

  4. click on file and click on export

  5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

  6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

  7. navigate to the location and find the name of the file with the .reg extension and click Open.

  Note: you will be prompted that importation has been properly registered in the register.

  
  TROUBLESHOOTING STEPS:

  1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

  2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

  a. click on the [] sign + next to HKEY_CURRENT_USER

  b. scroll and click on the [] sign + next to Software

  c. scroll down and click on the [+] sign next to Microsoft

  d. scroll down and click on the [+] sign next to Windows

  e. scroll down and click on the [+] sign next to CurrentVersion

  f. scroll and click on the [] sign + next to the Explorer

  3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

  4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

  5. close the Windows Registry Editor and restart your computer.

  Thank you

  K Ann C.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

   
  Thursday, August 26, 2010 09:27

   

  Response from Neil Clark

   

  Hi K - Ann,

  Thank you for the above information.

  I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.
  
  So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

  Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  Can you tell me what I need to do to work around this problem of backup of the registry?

  I look forward to receiving your response.

  Thank you

  Neil Clark.

   
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Monday, August 30, 2010 22:19

   

  Response of Windows Live Mechell P.

  Posted by Neil Clark

   

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  For this error, you must contact the Support Windows via Microsoft answers Forum link below:
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Thank you
  Mechell P.

  Hi NeilRClark,

  When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

  Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

  To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

  Check out this link to do the same thing:

  How to capture a file or a folder in Windows XP

  To take ownership of a file or folder

• Whenever I have shut down my computer I comnnection in bulk for my printers and having to reconnect again when I start-up

  I have two printers (HP G85 & Konica Minolta 2500W magicvolor) on a small business connected by ethernet network and other cable series. The network server is managed by Windows XP Pro V2002 SP3I and I have access to the network through one of the two laptops Toshiba Tecra to operate Windows Vista Business SP1. My problem only occurs on one of the laptops (the other works fine). The problem is not always consistent and often causes different symptoms.

  When starting the printer seems to be online and connected, however when I send a print to the system command accepts the order (or nothing at all), but the print window displays an error message after a few minutes. When I check the printer proerties sometimes I'm not able to display the port information at all. I have to cancel the print order, remove the printer from the network and 'Add printer' again. I send the print command and the printer now prints. Sometimes the print command works normally and sometimes, it takes a long time to print and the printer very very time consuming to complete the task from start to finish.

  Now, I have added the printer once again I lose the connection again when I shut down the computer and must go through the same drama when I start again. The problem is that with a single computer.

  grhilly,
  Thanks for posting on the Microsoft Answers community forums.
  Can you give us a little more information so that we can better help you?
  What is the exact error messages that you get when you try to print?
  You get the same error message if you try to print to the serial printer or an Ethernet?
  Have you tried uninstalling and reinstalling the printer drivers on the laptop which is having the issue?

  The answers to these questions will help us better help you solve this problem.

  In the meantime, here is an article that might help you to refine the question:
  http://windowshelp.Microsoft.com/Windows/en-us/help/3f04f06b-269F-4576-a6f7-ed17952d5e031033.mspx#ETDAC

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell XPS 15z: "your battery is temporarily disabled. If please shut down your computer and try again when the unit is in the operating temperature"

  Hello

  last night, I was working on my laptop, I realize that my battery is low. so I put for loading... after a while, I realized that the battery is 75% charged so that I disconnect it. and my laptop turns off.

  the laptop refused more late start... therefore I reconnected it the charger and the laptop turned on with the light that displays the State of charge (white light near the intersection of the keyboard screen) starts to blink in a cycle of 5 times... 4 times orange and 1 white time... and this cycle continues until I use the laptop.

  and this message when I go to THE BATTERY option "your battery is temporarily disabled. Please shut down your computer and try again when the unit is in the operating temperature"my cell phone is outta warranty... what should I do? kindly help

  hchentanshankar,

  Welcome to the community.

  I am sorry to read that you are experiencing this issue.  The battery is likely guilty, but you should check to see if there are any problems with the laptop or AC adapter / CC before you rush out and replace the battery.

  I would start by checking the bios, boot the system by pressing F2 to enter the bios, you can also press F12 and select the bios menu.  Once in the bios look for the option for AC adapter warnings, if they are disabled they can and save the changes. If there is a problem with the adapter, you should start getting errors on the adapter.

  If the adapter seems well, disconnect the battery from the system and turn off the laptop.  Wait an hour or two and then replace the battery and restart the system and see if you continue to get the message.   If you can run the laptop on battery only to leave the battery completely and then load it again and see if the problem returns.

  I know that this may not be possible before you buy a new battery but if possible try a power adapter and the battery and see if the problem persists.  In this way, you can know if the problem follows the laptop battery or the AC adapter.

  Please let me know what you find.

  TB

• Three Windows updates do not install whenever I have shut down my computer

  The same three windows updates fail at every moment of the installation, I shut down my computer. Can anyone help?

  KB3085544

  KB3114900

  KO 3114745

  Power system can record, information & system through OneDrive application logs. Thank you.

  Tom

  Trying to repair Microsoft Office 2007.

  Select Start, Control Panel, programs and features. Place the cursor on Microsoft Office 2007, right-click, and select Edit. Click on fix and continue. When it is finished, restart your computer.

  Try to update Windows by selecting Start, Control Panel, Windows, check the updates.