: Pro Pro compressed 408 408 - broken front glass

Similar Questions

• HP Pro Tablet 408 G1: HP Pro Tablet 408 G1 GPS

  Hello!
  I have a HP Pro Tablet 408 G1 p / n L3S96AA, after buying immediately updates to WIN 10, during driver Broadcom GPS driver installation of the messaging system is not supported.
  Question: Is there a GPS sensor integrated in this configuration, if it is to know how to turn it on and install the driver
  
  I apologize for my English :-)

  Thank you!

  Aerog wrote:
  

  Driver Broadcom GPS driver of the mail system is not supported.
  Question: Is there a GPS sensor integrated in this configuration, if it is to know how to market and install the driver

  GPS generally runs from a WWAN card. You must have Broadband Mobile enabled to use this feature.

  Only some models came with HP Mobile Broadband and GPS capability.

  Of course, you need mobile broadband to be able to navigate around the city, as there is no Wifi to connect to.

  Your 408 G1 stated on the box WWAN was included.

  HP Pro Tablet 408 G1 WWAN.

  If you don't have editing WWAN with a SIM card to activate, there is no abilitiy GPS either.

  I'm sorry.

• Satellite Pro M30: buttons on the front don't do media control

  Buttons on the front does nothing when the machine (satellite Pro M30) is disabled or order the multimedia. Is there something I need to do to configure, or is it a hardware failure?

  Hugo

  Hello
  to perform the General music in "offline" mode, I pushed and hold down the Mode button until the blue LED on the CD symbol lit up on the front.
  After that I inserted a music CD, and portable he played very well in "offline" mode

  But this time I had to study the manual actually.

• HP Officejet Pro 8600 - Paper copy on the glass of the scanner, Officejet tries to copy the ADF

  I'm trying to copy a document on my HP Officejet Pro 8600.  I placed the original face down on the scanner glass.  There is no original in the ADF.  Then, I pressed "Copy" and "launch in black."  the Offficejet then "think" the original is in the ADF file and try to copy a non-existent original.  The Officejet then generates a paper jam «»
  in the ADF file' error message with instructions to clear paper jam and press 'OK' and spews a piece of paper from the paper tray. There is not an option for 'back '.  If I try to humor the Officejet by opening and closing the cover of the ADF and pressing 'OK', the Officeject generates a copy which is covered with black ink.  If I ask preview copy o, the document on the scanner glass is displayed.  I can adjust margins, etc.  When I select then 'copy' and 'Black start', the Officejet is trying to copy a nonexistent document in the ADF and generates the "Paper jam" message again.  Since there is not an option "go back", I turn the printer off, then turn it back on, and then try again.

  How do I train me or the Officejet for copy of the scanner glass when the original is located on the glass of the scanner NOT the ADF?

  Thanks for your help to solve this frustrating problem.

  Hi Knitter507,

  Try to do a hard reset as described in the following link.  Click here

  If that doesn't help, can you print a printer status report and give me the a.) Product # and B.) Version of the firmware of the printer?  To print the report, press on the arrow to the right on the screen of the printer control and then configure / reports / Printer Status Report.

  What is the operating system for your computer?

  You are able to make a hollow photocopy the ADF?

• OfficeJet Pro 8620: Scan Back and Front within the app from HP for Pro 8620

  Hello everyone,

  I have an Officejet Pro 8620 printer and I want to scan a document from the application into the computer.

  If I click HP Scan and I place my document on the glass. Once I did I want to scan in the same document, papers, but cela I want to scan double-sided and I want to put in the upper entry not the glass. How can I do? If I tell the program to scan, it is just a face... Do I always have to select two faces in the HP scan before scanning to scan both sides papers? Is it possible to change the mind afterwards and I scans double-sided document in order to have a single document?

  Thank you

  Hi @Printermania17,

  Thank you for visiting the Forums from the HP Support! I see that you scan using HP Scan and want to scan on both sides. Yes, you must select each time the option Print 2 sides before you scan, unless you save it as a preset.

  Have a look here to save the presets on Windows 7: change the printing in Windows settings here you will be walked grace to save the 2 faces in a preset if you don't have to select each time you scan.

  I hope this helps, let me now if you have more questions.

• Transfer of first Clip in Premiere Pro compresses the images?

  Hi, if I transfer my first Clip in first Pro CC project, it seems that the video quality is compressed. How can I get the original image quality when I export my projects?

  Hi Martin,

  There should be no degradation in the media file when you export a Clip in Premiere Pro project. If you compare the original media file on your device in the synchronized file on your desktop, it should preserve the exact rate of the file of size, profile and ILO. You can watch this info yourself with an application like MediaInfo.

  Would be great if you can send a screenshot of what looks like the original file and what you see in Premiere Pro. You can also include which version of the Clip, OS and Premiere Pro, you have? Finally, this device created the file.

  Hope we can get this resolved for you.

  Thank you

  Peter Garaway

• Premiere Pro CS6 - Multicam is BROKEN! vs FCPX, FCP7 (Final Cut Pro), Avid, Sony Vegas

  If you plan to spend in FCP7, FCPX, Avid or another edition of Premiere Pro CS6 program, there are SEVERAL good reasons to do so, HOWEVER, if you deal with the edition of several cameras (multicam) so you think twice, until this problem is resolved.

  How to edit in Adobe Premiere Pro CS6 multicam? What is the best program editing for mulitcam or multiple camera editing? - The answer, as long as the question below is fixed, isn't Adobe Premiere Pro! From CS6 (version 6.0.2), this lack of 'design' or the 'weirdness' described below, multicam editing is very difficult and inefficient in Premiere Pro. These first two issues above are what I searched Google in hopes of a solution to a problem plaguing Adobe Premiere Pro for years, literally. Unfortunately, in the new Premiere CS6, with so many other great innovations, the question remains still makes it very difficult to do an editing multicam compared to Final Cut Pro 7, Avid, Sony Vegas, FCPX, etc.. They all handle editing multicamera in different ways but, having recently passed away from FCP7, and has worked on several modifications mulitcam, Premiere Pro CS6 (and CS5 and CS5.5) has serious problems with the multicam function that is broken right now (version 6.0.2) in first CS6 and fact editing multicam VERY frustrating experience and a lot less effective compared to the other NLE. If it's a drawing, then its imperfect as Yes, you can work around it and difficulty about what you did, but why so you have to keep wasting time precious 'fixing' in such things? All is not supposed.

  
  

  The question:

  Hit the button of the SPACEBAR or pause or stop during a multicam editing actually stop the edit, made a cut in your timeline (chronology) and then will be another camera (angle or shot), if you want only it or not!

  This issue was known by Adobe for more than two years, but they push aside, call a quirk of design and ultimately avoid such question stated in this thread of attachment: http://forums.Adobe.com/thread/738084?start=0 & tstart = 0

  Make cuts and put the angles on you when you simply to pause or stop playback is a huge problem of having your editing program. If this were happening in the normal timeline, so I'm guessing it would have been fixed, but it has not been fixed and it causes the editor to have to go back and remove unintended cuts and back shots where they should be. The PAUSE button should only SUSPEND or STOP playback, as it does in other programs. But in the first he stops, make a cut in your timeline and then switches to the first angle or shot you started with if you want or not. There is no way to prevent this at the moment on CS6. The other thread that talks about the question refers to the fact that the "question doesn't have the numbers" to make it a priority to be fixed and there are other "larger issues" that need to be corrected first, which makes me wonder if Adobe really listen to the comments of the user. I mean, 2 years, people complain about that and not of miracle. Their response was 'add to wish list' or ' this isn't a bug, it's a quirk, then do an requested feature"or"its designed that way." Designed like that? Who would really want it like that? No other NLE does this and for good reason. If the pause button pause just reading and that's it, do you think there would be a thread for a period of 2 years on how to hit pause "should also make an incision in the timeline and move from the shots? I doubt it. Its a defaultdesign. I feel strange asking the feature 'Please take the pause break button' or 'Please make the stop button to stop playback. Looks like its brokenness, to me.

  If the robot multicam is a major objective for the team Adobe Premiere, go ahead, which I think it is, then please start by making even the basic works work as one would expect to BREAK = PAUSE. STOP = STOP. Phew! It was difficult. Fact. Fixed. Travel! Currently, this design is counterproductive, not intuitive, helps no one and only lost valuable time while the Publisher must quickly "solve" the problem.
  

  Well, I thought I'd do two things here:

  (1) start a thread with as many keywords as possible so that this "numbers" question in this forum and in Google searches. I hope that soon when you google 'First multicam Pro' this will be the first topic on the first page. My hope is that I can put a nice 'RESOLVED' or 'FIXED' label on this thread, one day next (and I'll for sure!). If this is the case, it is a testament to the theory of wheel ran combined with a small web analytics.

  (2) do this a new thread, rather than continue in the old thread because it is time to ask a new question: how long will it take for Adobe a problem when its design is essentially broken causing users to have to do a 'fix' every time? At the moment it happens two years! This isn't a feature request... his service broken in the first. A drawing... necessary. I can't listen to Adobe and they care about certain things, but how fast they act? This is my real question.

  I wonder if this thread has more "we have more important things to fix" or "is not that big of a problem" or "this isn't a problem at all, it's an oddity" or "you can just go back and correct the problem, whenever you have to stop because it takes only a few seconds' or 'its not broken its designed to be counter-productive and frustrating for users.  Time will tell. Well, if you do mulitcam changes as much as I do then these "seconds" are added. It is designed this way, and then Adobe, I ask you this question: If you hit pause on your TV remote button, and he stopped at the TV live, but also turned the volume all the way down and changed the channels... always so would you call that a quirk? It would be wise to design a remote control like that? I would say the key on your remote control does not work well and should be fixed. Yes, you could address it quickly by pressing the button "last" or "reminder" and then hit the volume up button, but shouldn't the key BREAK of your remote did exactly cela and only that: BREAK?

  Please respond... to apparently numbers.
  

  Have you tried what a user suggested earlier in the thread? Although it takes a little getting used to, it works for me perfectly.

  "Before to stop playback, press the 0 (zero) on the keyboard and then you can stop the game (with the SPACEBAR) without cutting in the timeline."

• Satellite Pro A60: hinges are broken - need new parts

  I have a satellite Pro A60, unfortunately no longer under warranty. One of the screws which fix the hinges to the frame has sheared which means the hinge must be replaced.

  When I removed the top cover (it covers a bunch of inches at the back of the laptop, I noticed the two hinges were cracked.) This allows the hinge of the left hand to oscillate (as the only thing now that the screen of the laptop is the only one to live.

  Basically the two hinges need to be replaced because the only thing now the screen of the laptop (on the right side) is the clip on the cover! It works pretty well, but of course it will put additional pressure on the left side then, probably won't be too long prior to the screw on the left side shears off.

  any kind soul here would know the numbers for the left and right hinges?

  The model name is the model Satellite Pro A60EN PSA65E 00N00WEN number.

  Hello

  All parts can be ordered from the Toshiba service partner in your country.

  I studied a little bit in the net, but don t found part numbers.
  However, to ask guys ASP. They should know what part is compatible

• I can validate a sticker/Windows 7 Pro OA installation product key FRONT of the BONE?

  Hi all

  I bought a 2nd hand PC that has windows XP on, but I want now to remove it and install Windows 7.

  Curiously, the PC had original Windows 7 Pro OA sticker with the product key (my guess is that windows XP has been installed then it was a PC ex).

  My question is: is there a way to check if the product key is valid before installing Windows 7 Pro, because I don't want to install Windows 7 Professional, only to find out that for some reason any key is invalid and I have to re - install Windows XP.

  A big thank you to all for reading (and I hope to answer to) this question.

  No, you can not determine if it is valid or not, but just the fact that it is a Windows 7 Pro COA attached to the machine he could prove the validity.

• Satellite Pro L4500 x 12 broken screen.

  I have the above laptop model, who appeared to be when you run ok, until the day when the screen was opened to use machine, a crack appeared on the screen (at the bottom right).

  I sent this machine here, only for a report back that damage to the screen must have been caused by a user of the machine that the screen can not break by himself.

  I've heard that what has happened with other brands of machine, using similar screens and now I'm wondering, as other companies have acknowledged that there were problems with some screens, and if there was the same problem with everything on Toshiba laptops (maybe same suppliers for Toshiba as other companies).

  If someone has had this same problem and the problem is solved as im asking now for £169 to replace. (locally ive been told I can get a "lesser" up to £110 quality screen) but the machine is still under warranty of 12 months, I don't think its fair I would have to pay to replace it, when the crack appeared just by itself.

  To be honest, I had a lot of cell phones in my life and I have never heard of this question and heard talk that the screen could never break without any use of force.

  So, what to say. usually, this replacement of the screen is not covered by the warranty and it seems that in this case, you will have to pay for the new part ;(

• Will this work with a coming 8 Pro compressed?

  http://www.theSource.ca/eStore/product.aspx?language=en-CA&catalog=online&category=USB_Cables&product=8016141

  Yes.  Or if you are in the United States, save exactly the same thing directly from Dell and 2/3rds the cost and shipping.

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us&l=en&s=DHS&CS=19&SKU=A7223619

  Unfortunately, the cost of Dell/Canada is more than both Dell/U.S. and your store, even if I believe you get free shipping.

  http://Accessories.Dell.com/SNA/products/Cables_Hubs_Adapters/ProductDetail.aspx?c=CA&l=en&CS=cadhs1&SKU=A7223619&baynote_bnrank=0&baynote_irrank=0& ~ CK = baynoteSearch

• iPhone 5 s front glass lifts body

  Hello

  Today, I noticed that in my iPhone 5 the glass front is separate from the body. There is gap of 1 mm in the Middle, between the glass and the rest of the phone. Why has it happened?

  I bought my iPhone in the United Kingdom more than 2 years ago. What can I do?

  Unfortunately, I live in Poland and we don't have any store from Apple here. September I will be in the United Kingdom, so is it possible that in the Apple Store they will repair/replace my iPhone?

  Since the unit is out of warranty, you may be able to have it repaired/replaced, but at your expense.

• Z3 front glass - digitizer or screen protector

  Nice day!

  We know that Xperia Z3 has this pretty glass at the front (and back), my question is, is it already the phone digitizer or it's a built-in screen protector (since it seems that it is on top of the main screen)?

  If this is the first and, in the case where it cracked by any means, could it be easily replaced? How much would it cost?

  Thanks for any answer!

  It is the digitizer itself

• broken front screen cover

  broken hood front of screen (not the screen) which is written "Beats Audio and dv6" and fixed camera

  My sistem is - hp dv6 6000ee-

  How can I solve this problem... ?

  Replace it. The part is usually called a bezel screen if I understood... you mean the framework plasic as a frame around the screen. These plastic parts are usually available on eBay. HP Partsurfer would have them too but probably prohibitive in cost.

  $30 on ebay:

  http://www.eBay.com/ITM/HP-Pavilion-DV6-6000-6102sa-6157ea-6153ea-LCD-screen-surround-bezel-640421-001-/300715076461?PT=UK_Computing_Other_Computing_Networking&hash=item460403eb6d

• HPE 500f broken Front USB Ports. Need hardware

  I broke all my front USB ports. Does anyone know where to find replacemnts? I can't find parts in the manual or on the website of HP.

  Thank you.

  HPPartSurfer lists the USB port double room like 517181-001. See here.  Used for sale