Probably two stupid installation questions...

Similar Questions

• How can I add two very simple Questions to a slide?

  Hello

  I would like to be able to add two very simple questions to a slide, but don't know if (or how) this can be achieved. I've explained this more in detail below:

  ====================================================================================

  Scenario of

  The slide must contain two questions:

  Question 1: with two check boxes for the options Yes and No

  Question 2: with five check boxes for options 1 2 3 4 and 5

  A button (for example named Submit) to verify the responses from users by triggering a tip Action that verifies the radio buttons that have been selected.

  ====================================================================================

  The checkbox Widget looks like it could work for this scenario, because it allows each value to be assigned to a variable. However, when you try to put in place the tip Action I couldn't see all the variables I named in the checkbox Widget.

  
  

  If anyone has done this kind of thing before and can offer advice on the best way to create custom questions, I'd appreciate any help.

  
  

  For reference, I use 8 Captivate.
  

  
  

  Thank you

  
  

  Ross
  

  I indeed used interactions of checkboxes or radio buttons many times for this kind of slides. That's why I'm confused and I first want to know if you want an answer to the second issue as well? For the first question, it is clear that you need an interaction of option buttons, I don't know if you want to allow more than one choice for the second question. Only when you need to allow more than a choice will you have the interaction of check boxes, in the other scenario, option buttons will do the trick. It makes a big difference, because the radio button widget has only one associated variable that will store the selected element. For the widget checkboxes, you need a variable for each choice.

  Maybe my blog could help clarify, you can also download a descriptive table with all interactions of CP8 training

  Advice - Training interaction - Captivate blog

  BTW, I moved this thread to the Quizzing subspace.

• Probably a stupid question about sending electronic mail but not be received (or sent)

  Hello

  I try to send an email from my BB. I use this code below...

  Message msg = new Message();

  try {}
  String emailAddress = "[email protected]";
  msg.addRecipient (Message.RecipientType.TO, new address (emailAddress, emailAddress));
                      
  String fromAddress = properties.fetch () .getFromEmailAddress ();
  If (fromAddress.length () > 0) {}
  msg.setFrom (new address (fromAddress, fromAddress));
  }
                      
  If (properties.fetch () .isCopyEmailToSelf ()) {}
  If (fromAddress.length () == 0) {}
                              
  Returns false;
  } else {}
  msg.addRecipient (Message.RecipientType.BCC, new address (fromAddress, fromAddress));
  }
  }
                      
  msg.setSubject ("Testing");
                      
  content
  String content = "some test string";
                      
  msg.setContent (content);
                      
  Transport.Send (MSG);
  } catch (AddressException e) {}
                      
  Returns false;
  } catch (MessagingException e) {}
  Returns false;
  }

  I followed the tutorials in the knowledge base. I want users of my application to be able to configure the address and I don't want to save a copy of the email to any folder/email address on the phone.

  I'm currently debugging the code and it does throw an exception, and it is correctly signed. However, I get e-mails in the e-mail account 'to' or 'to' if account I have configured the application to bcc a copy for the account.

  Do I need to configure the appliance to send emails? I don't want to use any account e-mail on the device.

  Thank you

  SArah

  "can be sent to programtically without going through an email account set up on the phone?

  There is no API that I'm aware of that will support this.

  "When you say"works"he throws any exceptions, but it sends no emails no more"

  Doing so on the Simulator, not the end of the email to the top in the list of Messages.  The Simulator will attempt to send it and then, since you don't have the ESS work, give up.

  "If the user must create an account on the phone, do I need to modify the code to use it.

  As mentioned, I don't think that this code works without an account on the phone, so I think that this question is moot.

  "If you use the e-mail account on the device how is, you can define an address «of» the message?

  I don't think you can define an address.

  "you have more than one e-mail account on a device?

  Yes.

  You might find these links useful:

  http://supportforums.BlackBerry.com/T5/Java-development/sending-email-messages/Ta-p/442790

  http://supportforums.BlackBerry.com/T5/Java-development/retrieve-the-default-email-address-for-the-d...

  http://supportforums.BlackBerry.com/T5/Java-development/send-a-message-from-a-non-default-email-addr...

  Do a search too, I'm sure you'll find other useful things.

• Probably a stupid question but does Vista have BACK?

  If Vista has/uses BACK, how can I find?

  
  

• This is probably a stupid question

  But how to create mailboxes to vCO?  I saw workflows example organised by the colored boxes to group tasks.  I'm just curious to know how to do this

  Drag one of those yellow notes from the palette on your schema, then you can adjust the size, color and text

• Probably a stupid question... but

  Is it possible to import such formats (variables, page size, paragraph styles, etc.) that you can in FrameMaker? Or a document template is the best option?

  Thank you in advance.

  RaenLite wrote:

  Is it possible to import such formats (variables, page size, paragraph styles, etc.) that you can in FrameMaker? Or a document template is the best option?

  Thank you in advance.

  FrameMaker people (like me) are all the same. You want to win all the great stuff in InDesign and keep all the great stuff of FrameMaker!

  YES! It is done differently. In InDesign paragraph or character or table, object styles, or Swatches Panel, open the Panel menu (aka "flyout", the icon in the upper right corner of the Panel) and select 'Load '.

• Work records and other installation questions

  Hello, I am a user of long date first but have never been involved in the installation program. I decided to start making a personal video editing on my gaming computer and met with a few questions.

  The biggest one I have is with the work disk configuration. I read the help doc about 10 times and google all combinations of words I can think, but I'm still not sure how should I configure these for my setup.

  I have the first Pro CS5 installed on my C:, which is a 128 GB SSD

  For storage, I have 4 1 than to disks in Raid 5, yes 2.72 TB of total storage.

  How I want to configure my "scratch disks" for the best possible performance?

  Question 2: It could be linked to the work disk configuration, I'm not sure, but something that I've always wondered. What disk does save my projects to in this configuration? Is how important it? Then, I want to make my final video in this same folder or on another drive?

  Question 3: I a currently GTX 460 graphics card and enjoy benefits of CUDA acceleration. I have looked at adding a second in SLI for games purposes, but have read that the Mercury playback engine is not compatible with SLI. Does this mean that it will still work with a single card and I see no advantage in the first, or all CUDA acceration will cease?

  Thanks guys, I appreciate the help.

  First of all, SLI is not supported by PrPro, so it will do you no good and may well get in the way.

  You have only two HARD drives, SSD and RAID, so you don't have much choice there.

  Given the configuration of your I/O, I wouldn't worry about the ultimate in performance and just locate your assets, your projects and your Scratch disks on the RAID.

  In a more perfect world, I would say to separate the assets of the project, but it would mean another HARD drive (actually a good supplement, as a configuration 3 x is better than a configuration of 2 x).

  In a more perfect world, you would separate your assets to a HARD drive, your projects to another, your discs scratch to another and exports to another one.

  The foregoing has one drawback - household later. I create a new folder for all projects and locate my disks scratch that. This allows the elimination of this project, and it takes all the files from Scratch with her drive. However, for optimal performance, separating might get you a few points on the PrPro Benchmark scores, but doubt that you never notice it, more you still have work to do, when you delete a finished project. Your call.

  Good luck

  Hunt

• I've just updated TB I was running two clients installation 1 now have server problems

  I run two clients TB since an installation - never had any problems. I've just updated to 24.4.0 and one of these installed works fine, the other will not receive or send e-mails. I get the following error.

  The message send failed.
  The message cannot be sent because the connection to the SMTP server mail.just - 2bme.com failed. The server is may be unavailable or refuses the SMTP connections. Please check that your SMTP server settings are correct and try again or contact the server administrator.

  Any SMTP server I use - I have 4 that (usually) work, no matter which I use I have the same problem. I can use the same SMTP server to send the other as the other install - install works, this one isn't. VERY STRANGE.

  connectivity immediately after an update issues are generally anti too cautious anti-virus programs and blocking everything in this new unknown.

• Two monitors / installation of a second display driver

  Hello

  I'm not able to get my two monitors running. I just performed a new installation; These monitors were fine with my other drive hard and windows.

  I checked my display drivers in Device Manager and there is only one pilot listed under display cards

  ATI Radeon HD 3800 series

  I know it is supposed to be two of these listed, but there is not... Windows does not detect my secondary monitor... two of these monitors are the same and both connected by a DVI input on the graphics card.

  I've uninstalled and reinstalled the drivers several times with no progress.

  I have excluded sons and defective connectors by switching autour and he always seems to be the same screen that works on its own...

  Any ideas would be appreciated.

  Thank you

  Arthur

  Good so I solved the problem...

  Apparently, all I had to do was the eve of my machine and cut off from all power using the power bar for a few seconds until all residual power is gone, turn back on my machine and Voila!

  An easy solution for this aggravating problem...

• ODI Installation questions _ 11.1.1.7

  Hello

  While installing ODI Version 11.1.1.7 version of Windows Server 2012, has a few problems:

  (1) Got op - ups such as below; However, I took over ignoring and installation completed successfully.

  Don't know what these files are intended to be? I downloaded the Version of delivery but do not know why they are absent; Are really required for a complete Installation ODI?

  
  File not found: \ODI/od/disk1/install/win64/... E: /stage/Components/Oracle.OPSS.client/11.1.1.7/Data Filesfilegroup1.jar

  File not found: \ODI/od/disk1/install/win64/... E: /stage/Components/Oracle.OPSS.client/11.1.1.7/Data Filesfilegroup2.jar

  
  

  File not found: \ODI/od/disk1/install/win64/... E: /stage/Components/Oracle.OPSS.client/11.1.1.7/Data Filesfilegroup3.jar

  (2) I selected under installation options

  Installation of the Developer (Studio (with a Local Agent) ODI, ODI SDK

  Standard installation (ODI Standalone Agent)

  The question, I got here is that the ODI Agent does not work and more I didn't know the FOLDER Structure of the AGENT under the Oracledi folder. I also found OraclParams.bat file.

  Can you advise why this is different from the ODI 11.1.1.5 version please?

  (3) also, when I test the ODI_Agent; getitng the below error:

  Caused by: ODI-1424: Agent Host or port can be reached using the HTTP://Server:20910 / oraclediagent .

  Caused by: java.net.ConnectException: connection refused: connect

  at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:278)

  ... more than 41

  Is it because of the PORT problem?

  Thank you

  UB.

  Try to download the full version of Oracle's Support

  

  See you soon

  John

• OfficeJet 8600 more - Installation questions and gel

  This unit has been installed and functional for since December. The main computer is connected via a USB cable. Other computers using the wireless feature. Now, nothing works. I uninstalled and reinstalled the printer several times during the last three hours. This was done using the installation CD and also download the drivers/installation on HP website. I also tried to install just by pluggin installed in the unit. Nothing has worked. I tried then connected to the router and go wireless alone. A couple of times showed the Panel of the connected printer. However the blue light continues to blink and nothing has worked. When installing via the USB cable, it showed "USB storage device" failed. Most often, he showed the printer as printer FAX 8600. I do not use or want to fax. The scan function has never worked. When the device is blocked, the only cure is to unplug the power supply. Any suggestion is appreciated.

  -Very well, it seems that you have problems some wide installation of the unit. A preliminary question which I don't see in the description of your problem, what is the operating system that you are using?

• 11 GR 2 (10.2.0.3) RDBMS and G.I - installation question

  Hello

  I have to build two new servers with the following configuration:

  Platform: RHEL 6.2 64bits

  Oracle RDBMS: 11 GR 2 (11.2.0.3)

  Grid infrastructure (ASM): 11 GR 2 (11.2.0.3)

  I downloaded the files for RDBMS 11.2.0.3 but I couldn't find grid Infra 11.2.0.1 download. I found a doc of MOS (ID 1362393.1) that says to download the Group of hotfixes that contains the "Oracle Grid Infrastructure (including Oracle ASM, Oracle Clusterware and Oracle Restart)".

  I have two questions:

  • If I install 11.2.0.3 for RDBMS, will I have to install 11.2.0.3 for grid below as well GOLD can also install 11.2.0.1? What is the best approach?
  • Is - this group of patches (for grid below the MOS) above a full install OR I need to install 11.2.0.1 first and then the patch for 11.2.0.3?

  Thank you very much!

  The GI software version must be the same version of the database, or superior - it may not be a lower version. See MOS Doc 337737.1

  HTH
  Srini

• apex 2.0 installation question

  Hello
  
  I already put it to update 4.2 of the APEX.
  
  Then I download and set up the EA apex 2.0 release.
  
  1. I have configured using only not restful webservice all works.
  
  2. now I want to configure it to use the web service, then he needs a user apex_listener and apex_rest_public. Where is the script to install these two APEX 4.2 users? I found in the patch folder there is a script, but they are supposed to work against apex 4.1.
  
  Please help configured RESTFul.
  
  Thank you
  
  Robin
  
  Published by: user11109786 on December 3, 2012 11:04

  Hello Robin,.

  There is a script called apex_rest_config.sql in the APEX 4.2 installation package...
  See the [http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#BABFGHFJ url] 4.2 APEX Installation Guide for more details.

  -Udo

• Two Captivate v5 questions please...

  1. I have a colleague who works with Captivate v5. I'm on v5.5 and thought the upgrade from v5 to v5.5, a "free" upgrade and therefore she must be able to pass to v5.5 via the standard help/check updates. Is this correct - or I have it dream?

  2 may sound a stupid question - but the version of Internet Explorer (IE) or Firefox (FF) the user has installed have an impact on the execution of Captivate? If yes - what versions of IE and FF should be avoided or used only if it is easier.

  NEL

  You have dreamed it.  5.5 was a paid upgrade (much to the anguish of the Cp 5.0 at the time developers)

  Your browser version does not really affect the Captivate operation itself, but it can sometimes have an impact on how your published content performs.

  Don't know about Firefox, but in the case of IE, to avoid version seems to be IE8. Versions 7, 9 and 10 do not have gave me no significant problem.

• vCenter/vSphere installation Questions

  I apologize if this is the wrong community asking these questions in. I thought that the community of vSphere to be the most appropriate, but there is no category generic vSphere. The General category of vCenter Server was appropriate.

  Our company is buying some matΘriel for vSphere 4. The cost to buy the Essentials most of vSphere bundle 4 we have budgeted (_{$5000) but I'm sure I can convince our Exec team to approve the purchase of vSphere 4 Advanced Acceleration Kit (}$17000) once I showed them vMotion Live Migration and fault tolerance. That being said, I'm still new to vmWare and need a little advice products. Here are some questions I have.

  (1) my plan is to have the three physical hosts start their ESX/ESXi installation off our iSCSI SAN to avoid having to have local storage on each server. It presents an acceptable practice or if this is not preferred? Is there any loss of performance when the servers are running? Your advice here would be greatly appreciated.

  (2) I understand that I can choose between ESX and ESXi in my installation. I was under the assumption that ESXi is more than a low-end product (so the free version) however I read on VMware.com ESXi is the product preferred for new installations and ESX is available for legacy add-on products. Is this correct? Should I go with ESXi for three servers?

  (3) where vCenter Server move? It works on one of my three physical servers or need an additional server. I have no experience with vCenter Server, so I have no idea on this one.

  (4) would it be appropriate to install local disks on each server for the paging or swap file?

  (5) I'll buy Veeam Backup & Replication for backup. Does make a difference on the weather, I chose ESX or ESXi?

  Thank you for all your advice.

  You're right - if vcenter is down FT stops - but isn't that a problem is the first defective virtual machine at the same time.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful