problem about the bootcamp assistant

Similar Questions

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• Software download of window support option are not not in the bootcamp assistant

  I am trying to re-download the software window, but the bootcamp assistant have only the possibility to restore the partition into one instead of three options as usual (see photo below). Where should I look for the support of window software then? Any difficulty? Helpppppppp

  

  Please see...

  

• Problem about the United Nations wanted web site

  Hi, I have a problem with a website unwanted opening each time when I press on the new tab. Here is the url of the site.

  [www.delta-search.com/?affID=119776 & babsrc = NT_ss & mntrId = 9c9ea7eb00000000000000e04c09885b]

  A few days back I installed a program in the system named tv torn and there, whenever I open my browser I see this opening of the web site. I uninstalled the program, but was unable to remove this search engine.

  I tried to remove this the following search engine:
  1. remove the control panel through the uninstall a program
  2. by extension
  3. via manage the search engine.

  But the problem still exists.
  Please do help me.

  Type Subject: config in URL research browser.newtab.url and change the value to "on: newtab".
  

  < b > reset your search engine

  When you enter a search term in the address bar of Firefox and press ENTER, by default Firefox will make a "I'm feeling lucky" Google search and redirect you the first result that matches your search term. This behavior can be changed by a number of modules. If you want to restore the previous default behavior, please follow these steps:

  1. Entered on: config in the Firefox address bar and press ENTER.
  2. You should see a warning that changes to the configuration of Firefox can be potentially dangerous to the integrity of Firefox. Click I'll be careful, I promise you to continue.
  3. In the upper search box, type the key word as a search term. You should see a few other items, one of them is the keyword . URL. It must be bold.
  4. Right click on the key word. The URL parameter and select reset from the menu drop down.

  Now, you're done. Please report back if this solves your problem. Thanks in advance!

  You can find more information about the search functionality of location bar in the article to Search the web from the address bar .

• Problems about the recovery partition

  I have a Samsung np520u4c-a01ub... on my SW update... I wanted to install the recovery, but it is said that "recovery partition does not exist Setup will be cancelled. How to create a recovery partition? I searched on google and all I found was that recovery partition is created on a USB Flash drive... I want to create the partition on my hard drive recovery... is it possible? If so, how can I create one? :(

  also, when I bought this laptop, I got a problem with BSOD... I used the recovery and restored my PC... but then... when I installed the recommended facilities and updated SW Update... the recovery cannot be installed as what I mentioned above... Please help... :))

  Hi Floyd,

  Recovery partitions differ according to computer models, I would like to recommend you to the computer manufacturer contact to get more information about the issue.

  http://www.Samsung.com/in/support/main/supportMain.do

  Hope this information helps.

• Problem about the temporary Table

  Hi, I have a problem about cursor. Here is my sample code
  
  
  Thanks and respect.
  Jose
  
  Published by: mang jose on November 8, 2010 19:04

  Hello
  APEX at this moment can NOT handle Ref Cursor... You might want to look at using a collection...

  http://ORA-00001.blogspot.com/2010/02/ref-cursor-to-JSON.html

  Thank you

  Tony Miller
  Webster, TX

• USB Disk is not an option in the Bootcamp Assistant

  I have this problem and I was given the macbook I use I know the former owner said the cd drive is bad and would use a key USB is there a way for it to work, I tried to manipulate the info.plist file, but when I try to put in the content folder of the boot camp assistant it shows locked is there some admin great apple that I need or the previous owner did affect something more? Model of Mac is end of 2011 with the captain El OSX top and trying to install Windows 7 on it.

  In allow Bootcamp to install USB for OSX 10.9 * ŒUVRES *, find the codesign order. The command must be

  codesign sudo - root - fs - Applications/Utilities/Boot\ Camp\ Assistant.app

• Re: Qosmio G30-194 - problem with the Toshiba Assist tool

  Hello

  I recently downloaded and installed Assist tool on Windows xp installed costs. The problem is that it does ' t have the same characteristics
  as she had on the old Windows mce system. I think here to optimize the tool to control the work of the cpu (in the tab optimize).
  Help I have now has only the mouse, sd memory card and accessibility features... :/

  Can anyone help with this? See you soon.

  This certainly isn't problem Toshiba Assist. Problem is that you have not installed all other toshiba tools and utilities.
  Toshiba tool is small tool where you can find shortcuts to all other tools so when you install the missing tool, they will be shown here.
  Check it please what lack us and install it.

• Black screen after restart of the Bootcamp Assistant

  Hello

  I understand that 10 Windows is not supported with the MBP Late 2011 officially by Apple, I have it working earlier today and had no problems at all. I tried to add another partition for windows side so that I would be able to install Deep Freeze on Windows have a clean install of Windows every time that I boot in there and have all my programs and files on what would have been called "Local D.

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install. I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  PerfectStory wrote:

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install.

  You have deleted the EFI Partition from Mac. Not a very good idea. She does not hold the MBR. Your Mac uses a hybrid MBR. The MBR and the boot for Windows Manager are two separate entities.

  I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  Disk utility is now considered an invalid drive due to a missing EFI partition. How did you again the reader "XV"? If you start from W10 in the optical drive, it is no Bootcamp involved more.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  Please after the release of the following Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• problem with the download assistant

  I download the trial version of photoshop cs6 extended but the download wizard does not open or initiate. have even tried to do a right click to run as administrator, but the options never skipped upward all the. I don't know if the problem is my pc or download to adobe assistant himself.

  can someone give me help?

  Please see the solution to troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html

  If you continue to experience difficulties, you can try to start a direct download by following the steps listed in http://forums.adobe.com/thread/981369

• Problem about the iPhone 6 s MORE and Ford SYNC (Ford Ecosport) bluetooth pairing.

  Hello Apple community!

  I have an iPhone MORE 6s firmware iOS 9.2.1 running and a Ford Ecosport trend M/T (bought last March 2015).

  I always pair my iPhone with audio system in my car (Ford SYNC) every time I jump in my car every day. I drive 4 hours per day and I'm fond of listening to music with my iPhone through the car radio in my car. But while playing music a few days ago my iPhone just disconnected my car bluetooth device. I tried to pair it several times, but it keeps disconnecting. I switched to the USB mode (I always connect my iPhone to my car for the end of charge and also to listen to music when I want to disable my iPhone bluetooth), my iPhone is connected, but all I hear is static, whenever I play music from my iPhone.

  I tried to delete my audio system phone master reset Ford SYNC and bluetooth devices list and also reset my iPhone, but it still shows the same results. I would appreciate anyone's response on what I live now.

  Thank you so much in advance!

  PS: I already upgraded my iPhone iOS firmware to 9.2.1 before that happened.

  Kind regards

  Marc

  Hello, m.asebo.

  It seems that you are having problems with your iPhone 6s more lose connection to the audio system of your car there. You did some great troubleshooting so far. Great job. The following Knowledge Base article offers up a few big steps to troubleshoot your iPhone:

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device. Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Problems with the wireless Assistant

  I built in router and it was working great until a few days ago, when he stopped turning.

  For some reason any whenever I try to open my HP Wireless Assistant, nothing happens.

  Now I can not connect to wireless networks. Any idea as then why this is happening? It's my router or Wireless Assistant.

  Try this online page to run the wireless setup application.

  Wireless and mobility - use the Network Wizard to configure your... :

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Problem about the listener, the timer and the timer task

  Hi all

  I create an application that is listening to the incoming call.

  When incoming call arrives that a single clock time is beginning for 1 min.

  If an another incoming call arrives less than 1 min this timer must be handed over to zero and count from the beginning.

  but in my case it not to reset the counter, will launch the counter where it was finally.

  both my variable are static

  any help...

  And what is the status of idel of application if the incoming call is coming.

  application is paused or in working order?

  I suspect that you have other problems, but before we start looking at these, please can you change your "static" variables and use RuntimeStore for these.  static variables are not singletons, except in certain specific circumstances.

  http://supportforums.BlackBerry.com/T5/Java-development/create-a-singleton-using-the-RuntimeStore/TA...

  Another recommendation.  Do as little processing as you can in a listener.  Swap in your own application to perform any significant processing.  Use GlobalEvents to swap in your own application.  Here's the good KB article that will help you to do so.

  http://supportforums.BlackBerry.com/T5/Java-development/global-events-and-global-event-listeners/TA-...

• HP pavilion slimline 400: a problem about the upgrade card chart, power, and a new case

  I have a hp pavilion slimline 400 and I want to upgrade the graphics card of it. However, the food is not enough for my new graphics card. The image is too large for this case. SO I decide to buy a new case and PS! Move all the thing inside the hp pavilion slimline 400 to a new case. But I heard someone say that this kind of PC can match the case that we can buy in the store and the cable of the PIN from those of food on the market do not correspond with the motherboard. CAN I really do that?

  You will still need a case that supports the Μatx layout.  I/O back plate must be modded or replaced to adapt.  Most cases have both Μatx and ATX layout (dead end of pines).  For some time that this question of stitching was done.  These help?

  

• What is the problem about the image and the keyboard

  After I typed in the textfield, button image changed size...

  Please tell me what I have to do, I just want to keep it straight and no resizing.

  .

  Yes, if I use another component, such as a button, it works fine.the keyboard will cover the component.

  Finally as I try to set the maximum and minimum of the container size, it also works very well.