Problem accessing my network on Vista drive when I try to back up the data on my PC... Does anyone know why it ask again me username and password?

Similar Questions

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Does anyone know why when I run Defender and he finds a Trojan horse, and I try to remove it, it begins to make then after some time the computer stops

  original title: Defender

  Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• SP2 for vista asks you a username and password and the ease of accsess does not work?

  While the installation of sp2 it says windows will perform a clean update I read what was going to happen and gave go ahead and his now ask me a username and password, but I don't have vista sp1 version. I belive microsoft 1) I forgot to add a NAME AND PASSWORD of the user default or 2) messed with sp2 for vista completely...

  Hello

  The problem is solved?

  Reference:

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.

• I have a Canon MG6120. When I start it up I get the error code 5050. Does anyone know how to fix this?

  I have a Canon MG6120 all-in-one. When I start it up I get the error code 5050. Does anyone know how to solve this, more power to the wide / power?

  Hello gregg.

  Please, try the following to see if we can solve your problem:

  1. turn off the printer.

  2 disconnect the power from the printer for at least 5-10 minutes.

  3. once unplugged, remove any paper from the device.

  4. check for obstructions in the paths of the unit or the paper.

  5 If no obstacles are, plug the power back in and switch on the device.

  If the problem persists, the unit will require repairs for the correction.  We apologize for the inconvenience.  Please contact our support group using the 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help at the Contact Us.

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Hi, my trial version of Lightroom 5 has expired recently and I bought now fully. I downloaded the CD on my Mac, but when I open again the Lightroom application, it always says that the trial has expired. Does anyone know how I can update so I c

  Hi, my trial version of Lightroom 5 has expired recently and I bought now fully. I downloaded the CD on my Mac, but when I open again the Lightroom application, it always says that the trial has expired. Does anyone know how I can update so I can finally use again? I appreciate really all help! Thank you!

  Joanne, please remove your current installation of Photoshop Lightroom by using the uninstall program located in the/Applications/Utilities/Adobe Installers.

  You will then want to download Adobe Photoshop Lightroom 5.7.1 of Adobe - Lightroom: for Macintosh.  The update contains the entire application.  Photoshop Lightroom cannot be installed through the Adobe Creative Cloud Desktop application and still be allowed with a serial number.

• I backed up my drive with Idrive before it crashed, but after reinstalling my backup for firefox profiles, I can't return my saved usernames and passwords

  I have backed up our hard drive on IDrive, replaced the failed hard drive, but I cannot reinstall my user name registered and saved passwords from saved files. I reinstalled my profile from the back to the top successfully, but the user/passwd news aren't there. I understand that this info is stored in two different places, and I tried to locate the missing files in my Idrive account, but nothing helped. I'm wasting my time or this info is salvageable? Thanks for any help.

  SUCCESS! This is the solution I needed. Thank you very much. After resetting my preference signon.importedFromSqlite on the topic: config page by default, deleted the file logins.json in the current profile folder and then I drugs and dropped my old code of my saved files file and VOILA! All of our usernames and passwords reappears.

  Thanks Cor - el. Thank you help and time to solve my problem!

• I have problems when I download the trial version of photoshop, when someone asks me my username and password it doesn't work, it works only in the web

  I already download the trial version in begging, everything is ok, but when they ask me for my user name and password to access choose what program I want to download that s when I can´t enter, and the strange thing is that everything is working at the moment where I log on the web. I already try to restart my computer, but it does not work

  Hello

  This link might help: Adobe Creative Cloud connection errors

  Kind regards

  Sheena

• I'm having a redemption code that goes into problem.  I can enter numbers, but when I try to enter all the letters it is as if the computer is locked, but he is not on any other application

  I'm having a problem entering my redemption code.  You can enter numbers but no letters.  It's as if the computer is locked when I try.  My letters work on any other application

  Looks like you are trying to use a (alphanumeric) redemption code where you are supposed to use a serial number (strictly digital).  A purchase is normally used to purchase a serial number... serial number is what you enter to activate the software.

  Using redemption code

  --------------------

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

• When I try to share files between two computers Windows XP with SP3, I'm invited for a user name and password on both.

  I set up a home network with 2 computers with XP Media Center 2002 SP3 1 and 1 with XP Home SP3 2002 can see computers on the network and the Ping works. But I wonder a user name and password. seems to come from the computer. Do not see documents shared to the Media Center computer.

  original title: file sharing problems.

  As far as I can remember, Media Center is XP Pro with additional multimedia functions.  What follows is a very old post by MS MVP Malke, but the Council is still sound:

  File sharing / print

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Configure Windows to login automatically (MVP Ramesh) -.

  http://WindowsXP.MVPs.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• does anyone know why my windows vista doesn't detect internet connection Wi - Fi?

  my laptop doesn't detect wireless internet, but it allows to detect a wired connection.

  Hello

  • What were the changes made before the issue started?

  The following articles might help you solve this problem.
  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot find my dvd player when you try to back up the system XP

  I ' using the back up or Restore Wizard to back up all the information on the computer, I chose then to the next step, I am told "choose a location to save your back upward.  My DVD player's DVD - RW drive (d) it appears on the desktop but not on the list of places to save my back in the wizard.  I tried to use an external dvd drive, but it shows too high (f) that is not in the list.  Any ideas?  Thank you

  You are better to save the files to a new folder that you created (create

  in my documents), save the files in the folder, once its thru with data, L.click on

  then new submenu, move the folder, move the dvdrw.

• Does anyone know why when I try to buy the plan CC, I get a message saying that I can't buy because it is not available in my area (Mauritius) - however I am not in Mauritius... I used to be a long time ago... How do I reset the settings in my area so I c

  IM is more alive in Mauritius, but when I try to upgrade my free trial status (I have download in Mauritius) I said that it is not available in this region. I am now installed elsewhere, but for some reason that it is not recognized. Can someone help with the settings?

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.