Problem activating BTooth between cell phone & Equium L40

Hi all

Just bought a Toshiba Equium L40 series and can not detect my btooth active mobile phone in microsoft Sync Center, an I being dense and the laptop don't even no btooth capacity? Assumed he would. No problems with the detection of just etc. nearby wireless networks does not detect the phone, what am I doing wrong?

Thanks for any help in advance

Stand by. You are 100% sure about BT on your satellite? Maybe your laptop doesn't have BT. Please check the underside of your laptop. Each laptop with BT module has a label of BT.

To be honest, I think that your Equium has no BT check it out!

Tags: Toshiba

Similar Questions

  • Equium L40-156: graphics card problem - error code 12 in Device Manager

    People of the night...

    Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

    Tried the drivers that I had with the installer
    Tried the drivers from the toshiba download page
    Tried the drivers on the Microsoft Update site
    Tried the drivers from the website of intel

    All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

    Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
    Display settings do not display a connected device, DXDIAG had no idea either.

    Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

    Any suggestions, greatly appriciated

    Ta

    Hello

    I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

    ------------------------------------
    + Error code 12 +.

    + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

    + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
    -------------------------------------

    Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
    I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
    You can use the Toshiba Recovery CD/DVD of restoration!

    All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

    Check this box and report if the same error is displayed on the laptop with the factory settings!

    Good bye

  • Problem starting Equium L40

    Hello

    I use F1 to start my Equium L40 every time I tun turn it on. It will then start ok but he forgot the time and date, as soon as I update time / date, the computer works perfectly I can access all my email etc accounts without having to put anything.

    The problem started after the replacement of the battery because of that being almost completely dead. I noticed that the computer will not work on AC only without mounted battey but is still charging the battery ok. (if the adapter is ok)

    I love the computer and do not really want to buy a new, but it is very frustrating and tedious when I turn it on.

    Maybe there is a battery backup I can change to fix the problem?

    Any help would be appreciated?

    Hello

    Laptop should also work without battery but connected to the power adapter
    So I guess that your motherboard is affected in some way.

    If the RTC battery (bios) is empty, the time and date in the BIOS menu would be reset to the default value. But in my opinion, this shouldn't be a problem to use the laptop with AC adapter.

    However, the RTC battery can be charged to do that you need to connect the main battery and power adapter and the laptop must be turned on for a longer period of time (18-20 hours).

    Check it out!

  • Equium L40-156 initialize problem

    I have an Equium L40-156. When I press the power button the power led lights up, but there seems to be no hard disk activity. I manually turn off by pressing the power button for several seconds, leave it for a few seconds and then press the power again button once it starts normally.

    Any ideas please?

    Hi mate,
    Have you recently updated your BIOS, installed a few more RAM / another HARD drive or software? Perhaps some update driver?

    Since when the error pops up? And you have always guaranteed on this subject?
    So, if so, then bring your machine to an authorized partner and let check your machine. Would be the best...

    Greetings

  • When I opened my cell phone message shows that Windows detected a hard disk problem I use toshiba laptop windows 7

    When I opened my cell phone message shows that Windows detected a hard disk problem I use Toshiba laptop windows 7

    Hi Vimalpal,

    To provide the proper resolution, I would need more information on your side.

    1. What is the number of the model of the laptop?

    2. did you of recent changes on the computer before this problem?

    Method 1:
    I suggest to run the troubleshooter and check if that helps.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    I suggest you run the disk check and check if it helps.

    Check a drive for errors

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Hello Hello. If I have Adobe audition, can I install first program in my laptop, and then in another (if I decide to change my cell phone for a newer laptop)?

    Hello Hello. If I have Adobe audition, can I install first program in my laptop, and then in another (if I decide to change my cell phone for a newer laptop)?

    You can install hearings on as much as you can, there are not limited to the facilities. However if you had bought the individual subscription, you can log in and activate the app as a full version on 2 devices only.

    If you buy a new device and want to activate on the same, all you have to do is simply disconnected from Adobe Creative Cloud application of either of the 2 previous devices, so that you can maintain the number of activations that 2.

    You can switch activation between devices, no problem.

    Let us know if you need more details.

  • Air 2 iPad 64 gb wifi cell phone

    I have had my ipad air 2 cell phones 64 GB version wifi 9.3.1 for 6 months and it froze on me for the first time tonight. I did a hard reset that worked, but now the screen lapses changing apps in-between. I am just updating my iPhone 6 version 9.3.2 and tried to update my ipad to the latest version 9.3.2 but now me not to make it stating that "no updates found/required. I don't know if it is a problem of IOS but my ipad still shows the version 9.3.1 and my iPhone is showing 9.3.2 version. I'm not sure if I have to wait for the update to appear in the next 24-48 hours.

    Will keep you posted

    Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

    If that doesn't work, try updating through iTunes on your computer.

  • HP ENVY laptop - 15-ae101nx: when I put my cell phone battary trolling the games what should I do?

    When I put my cell phone battary trolling the games what should I do?

    Games run perfect when I put plugged in, but when I play on games battary became late?

    Help me.

    Hello @XxHamodyGamerX,

    Thank you for visiting the HP Forums!  You have come to the right place to ask questions, find solutions and get help from others in the community!

    I read your post on game performance below of your DESIRE for computer laptop-15-ae101nx then on the battery and wanted soft hand for you.

    This document should take you in making adjustments to the different systems of power supply on the system. Battery power, it is probably defined by default on energy saving , which will reduce the performance of the system in order to save energy and extend the time between charges.

    Microsoft also has very detailed information here on different powers available plans.

    Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Thank you.

  • Equium L40 - Vista won't start after installation of product recovery

    Hello

    I had to realize a product uses recovery provided restore disk on an Equium L40 computer laptop (PLS41). The recovery procedure done his job to the end, reformats and copy all the files and then restarts. Now the problem starts...
    The pc gets in front of the BIOS boot screen, then it goes completely black with only a cursor to underscore flashing in the upper corner of the screen. No HARD or CD-rom drive activity.

    I did the cover about ten times now. All with the same result. I tried the repair procedure using a Vista boot CD and I also tried using another disk supplied with the computer, anytime upgrade from Vista. Here they are without defects, see the hard drive and shows that the vista files are on it, also sees the winRE partition.

    I tired even fresh install from the disc at any time. It also reformats the disk, copies and decompresses all files needed, begins to install the updates on the disk and then said: he needs to restart. It restarts and goes to black screen with flashing underscore cursor. What happens if I press the 'coup of any key to boot from CD' or leave it to boot from the HARD drive.

    I tried to fix this for two days now, including endless hours of forum to research, the computer belongs to my friend gets very angry I am. I need help. No one knows how to fix?

    Hello

    According to your message, I think that the HARD drive is faulty.
    I think there's a defective recording of MBR (MBR) of the drive and therefore the laptop refuses to boot.

    One question; have you tried to set the BIOS default settings? If this is not the case, try this.

    If it doesn t help and the laptop still does not start upward, then you should ask ASP for verification.
    I think it s a problem of HARD disk and, possibly, the HARD drive must be replaced!

    Greetings

  • Equium L40 - 10Z goes dead after leaving her alone for a while

    Evening,

    I noticed a problem shortly after buying my Equium L40 - 10Z. If I leave it to the top, but don t he use for a period of 3 to 5 hours or more, the laptop is still on but there is no hard drive activity and the screen is blank. Nothing I press on including the power button it will wake up. I have to press the power button for 6 or more seconds then release, then turn the laptop back on. I tried to recover the laptop using the DVD provided without result. I have my settings of power to the maximum, but I changed it so that if I close the lid, it was nothing happens as long as the laptop is plugged and it doesn t hibernation.

    Any thoughts?

    Kind regards

    John

    Looks a bit like a hardware problem.

    One question; have you noticed this problem immediately after installing the operating system from the recovery CD?
    Please check it and do not install any 3rd party software/programs because it could have a negative influence on the operating system.

    If the laptop is not response after using the Toshiba Recovery CD you no doubt contact the ASP in your country for a control.

    If all goes well, it is not a serious problem.

    Good luck

  • Touchpad no longer works when Equium L40 has been moved

    I have 2 laptops computers Equium L40 x.
    Both have recently begun to encounter the same problem with their keyboards.

    For some reason, whenever the laptops are horizontal, the keys do not work.
    However, once the laptop is tilted, the touchpad works very well.
    I can then return the phone horizontally, where he works, until the next time he decides to stop working!

    I would have thought it was an isolated issue, but for the fact that it happens on BOTH my laptop!
    Laptops were both purchased in August 07, and so, unfortunately, both are guarantee.

    Anyone experienced the same thing, or give me any advice to offer?

    Hello Nik

    Your story sounds really amazing. I have never heard something like that. Tilting laptop is not for me so good idea. What do you think about this? :)

    Sorry, but I don't know if anyone here can offer explanations. The best thing you can do is to show it to the service. Perhaps there is a contact problem. The strange is that you have noticed the same problem on two laptops.

    Have you noticed that from the first second, when the notebook is on or later after some time?

  • Equium L40 - 17 M PSL49E - collapsed Wlan work after BIOS update

    Hi all

    I have problem with my laptop.
    The laptop Equium L40 - 17 M, model PSL49E-00C005KS.

    For a few days, I am updating my BIOS after update, with the version P20B200 (bios 20080617131309), internal wireless stop working.
    Show me device is turned on but activity is off, and I can not turn on the device.

    First thing I think is 'Windows' and I start the recovery disc. But after the problem of the recovery is still exist, Wireless does not.
    Then I put external USB wireless and are trying to connect with the router.

    Computer recognises USB but it also don't do no work orders, so the problem is not wireless (I'm not sure why), but I think that this problem is because the laptop can not recognize USB device properly.
    I want to Flash the bios with old BIOS but I don't have it

    I'll be grateful to someone who have the same problem, tell me how to resolve this.
    Or send me an old bios for my laptop.

    Hello

    I always put t know what BIOS version, you used.
    Is that Equium L40 PSL49E can use two different BIOS versions.
    If you are using XP you need to version 5.50 of BIOS, but if you use Vista then you need to use the BIOS 2, 00 - Win.

    Secondly, I would recommend updating the driver Realtek WLan until you try to Flash the BIOS again.
    I think that the need for notebook Realtek Wlan driver.

    Check the driver from the Toshiba page or download one from the Realtek site directly!

    PS: The wireless network card must be turned on before you try to connect to the router.
    You have to switch the WLan ON switch and need to press FN + F8 until the WiFi network has been activated!

  • I want to buy a cell phone with IMEI No. Without Bill? How to check s not robbed?

    I want to buy a cell phone with IMEI No. Without Bill? How to check s not robbed?

    There is no universal database of stolen iPhones.

    You can check if the iPhone is locked here activation:

    https://www.iCloud.com/activationlock/

    Buy your iPhone directly from Apple or an authorized

    iPhone dealer to avoid problems.

    If there is something about this proposed agreement that makes you

    uncomfortable, walk away.

  • Toshiba Equium L40 - 10U Wireless does not

    I recently updated my Toshiba Equium L40 - 10U to Service Pack 2 for Vista and now my wireless does not work. I tried to update my driver - but its already been updated, checked for updates - all installed, ensured this driver has been activated. Yet I still can't wireless to work, I don't know what to do now!

    I checked my network connections and my wan (PPPOE) miniport is disconnected when you try to connect it comes up with ERROR 815. Then I have to make sure that my internet connection options were correct - do not establish a connection and do not allow the proxy server and still get this message.
    My BIN is Realtek RTL8139/810 x Family Fast Ethernet NIC (do not know if this is useful or not) I tried to turn it off then try and turn it back on? But do not know if that would improve the situation or not.

    Hello

     
     
    (1) do you have made no changes before this problem?
    (2) what is the exact error message / complete you receive?
     
    Method 1: Follow the steps in the following articles and check if they help.
     
    Step 1: Safe mode with networking 
    See the link below and check if the problem persists in safe mode with network.
    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
     
    Step 2: If the problem does not persist in Mode safe mode with networking, I suggest you to put the computer in clean boot mode and check if it helps.
    Clean boot mode
    A clean boot to check if startup item or services to third-party application is causing this issue.
    Try to install the updates in clean boot mode, and check if the problem still persists.
    You can read the following article to configure the computer to boot:
    http://support.Microsoft.com/kb/929135
    Note: After completing the troubleshooting steps, please refer to clean the start link to set up your computer to normal startup mode.
     
    Method 2: Follow the steps in the below items to Disable Antivirus and firewall and check if it helps.
     
    Step 2: Turn Windows Firewall on or off

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
     
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
     
    Method 3: Uninstall and reinstall the drivers
     
    You can also try uninstalling and reinstalling the drivers who can help you further.
     
    Also see the links below for assistance.
    Windows wireless and wired network connection problems
    List of Error Codes may appear when you try to establish a dial-up connection or a VPN connection in Windows Vista

    http://support.Microsoft.com/kb/923944
     
    Hope this information helps.
  • Cell phones interfere with my router.

    Hello

    I have a router WRT310N v2 and every time GET with any member of my family a cell phones call incoming/text near the internet router falls or slows down until the phone is not in ~ 15-20 feet from the router.

    We have AT & T and different types of LG, Motorola, Apple, Samsung phones. The router is placed between our two computers and because of the limited space we have, we cannot place anywhere else.

    Any help would be appreciated, thanks.

    Sounds terrible

    Idem: wired or wireless?

    Without knowing your configuration, I would try the following:

    Change the mode of dissemination, set only the bands you need, only G, G + N or N only. Change the separation of channels auto 20/40 to 20 or 40.  Try the tracks 1, 3, or 11.  Once again, one or more of these options may be unavailable depending on the modes that you select.

    We have ATT & T as well and several iPhones to use around our router.  I also have a panasonic 2.4 Ghz on the same office as the router.  No bandwidth problem either. We hope that understand you.

Maybe you are looking for