Problem adding a second drive to VM after P2V using Stand Alone inverter

Similar Questions

• Satellite P300-16 t - adding a second drive HARD-success!

  I have added a second hard drive today for my Toshiba P300-16 t.

  I realized that I had a Toshiba SATA drive in a USB disk device that would spare - 250 gb.

  I improvised by removing the feet spread on the cover of the second cage to hard disk using a sharp knife. I put the Bank in place ensuring maximum safety. I also used a heat-resistant material (say what) to secure the drive up as readers are rarer than hen's teeth. I made sure that the reader also had room to breathe. The cover was then released and I turned on my computer and it found the new HDD, the installed drivers at home but hey presto! Another 250 GB to play with.

  Now, I did it is because I call four FSA in the United Kingdom but they weren't any help by providing a cage for the second disc.
  Two said they only deal with businesses and not individuals.
  Others have said that they only provide power cables and batteries!
  Hope that my Tosh never goes down and I must use their services...

  Anyway, I don't recommend anyone do what I just - it is possible if you are a bit adventurous...

  Have you used the Hotglue?

  Surely, you can get the FSA HARD drive media. Unless there is a global shortage on cradles P300: p

• HP Envy TouchSmart, m7 j-000dx: adding a second drive

  I want to add a second drive of my laptop HP Envy TouchSmart (17.3 ") since I was a lot of data on my current SSD.

  My question is that the computer will support the SSD and SSHD readers?

  Are there restrictions on the size of the disk (to 1, 2-4).

  I had my HP Envy since 7/2013 and am currently using Windows 10 (64-bit).   I've updated RAM 16 MB (max for this phone).  The material is otherwise original.

  It has been frustrating to look for information, if I can do it at all and, if so, what can I use for this second disc.  Thank you.

  Here is the Service Manual:

  Manual

  The laptop is essentially identical to the series of 17 t-j000xx want so that they share a textbook. I used to own a model 17 t - j029nr that would be about the same as yours. The laptop has 2 size hard disk bays 2.5 inches and there is a slot on the motherboard for a reader to the WSSD mSATA.

  This video shows how to add a second hard drive.

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  The company that made the video, www.newmodeus.com also sells hardware, you need to add a second drive.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  I bought one of these and used to install a second hard drive in mine. It may be a mechanical drive an SSHD or a 2.5 inch SATA SSD. It can be of 7 mm or 9.5 mm thick and is limited in size only by what you can find on the market. I think that 2 TB is still the larger disk of 2.5 inch 9.5 mm there.

  The only complication is going to be if you do not have an mSATA 32 gig drive in the computer as it should be removed if you are running an SSD. Looks like you don't have a disc mSATA. Post back with more questions about it he gets the kind of technique and not need to go if this is not a problem for you.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Adding a second drive to my Optiplex 755

  I bought an Optiplex 755 renovated a few months back that came with a floppy (really?). I decided to add a second drive, so I removed the disk and put a Seagate 750 GB drive in its place. I entered the program installation and active the drive, rebooted, went back into the Setup program to verify that the disc was recognized that it was. BUT now, whenever I restart the machine, I have the black screen with the following text:

  Replacing the HARD drive is not valid, continued use can lead to long-term reliability problems HDD please press that F1 in you want to continue.

  It also gives me the choice to press F1 to continue, F2 to enter setup or on F5 to run tests.

  I press F1 and it starts normally.

  My question is how or what I do to eliminate this black screen? Because if I restart and let the system is here and waiting forever.

  Thanks for your help.

  The DT, SFF, USFF systems REQUIRE specific Western Digital or SAMSUNG drive model. Replacing the HARD drive is not valid is specific to 745 and 755 SFF and ULTRA-COMPACT systems.

  The DT, SFF, USFF models will have a thermal message.  The model of the Tower does not care the drive Type.  This is due to "thermal considerations.

  

  Desktop Dell 755 is configured to reject anything but a hard drive Western Digital or Samsung, claiming that it is due to "thermal considerations.  This is for Desktop and SFF and ULTRA-COMPACT models.

  "HDD replacement is not valid" Message on a Dell Optiplex - Article KB - 329305 computer | Reference Dell

• Flash drive, write protected after the use of Ready Boost

  I have a 8 GB USB flash drive, and I've been using ~ 4 GB for Ready Boost for quite a while now. When I tried to write something on the drive recently, I get a message saying that it is write protected. I tried to change the size of the cache, but has nothing - no error and no change. Tried turning off RB for the drive and nothing. There is no protection switch on the drive, so nothing to break. Tried to restart, refomratting the drive - no joy.

  Only, I could get a new drive because they are so cheap, but this one has a MicroSD in it like a separate disk drive, so I would keep

  Hello

  You can remove your usb flash drive write protection using the method below:
  a. open the start menu, in the search bar type regedit, and then press ENTER. This wil open the registry editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:
  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. highlight StorageDevicePolicies, and then create a new DWORD called WriteProtect (32-bit).
  d. double-click the registration key in the right window, and then set it to a value of 0 in the value data box
  e. press OK
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Cannot invoke the stubborn task in adf application flow after deployment on stand-alone WSL

  Hello.

  We have developed application in jdeveloper 12.1.3 using ADF workflows and *.jsp (try us and *.jspx also) pages.

  On integrated weblogic application server works, but after successfully deployment on stand-alone WLS (ver. 12.1.3, demployment mode domain) with ADF runtime 12.1.3, we cannot call activity of workflow (bounded task flows) on click of a button. If we call button click on the page of the progress of the task without terminals began that it works well.

  On the server we have deployments:

  ADF. Oracle.businesseditor (1.0,12.1.3.0.0)

  ADF. Oracle.Domain (1.0,12.1.3.0.0)

  ADF. Oracle.domain.WebApp (1.0,12.1.3.0.0)

  consistency-transaction-rar

  Application of the DMS (12.1.3.0.0)

  EM

  emagentsdkimplpriv_jar (11.2.0.1.0,12.1.0.3.0)

  emagentsdkimpl_jar (11.2.0.1.0,12.1.0.3.0)

  emagentsdk_jar (11.2,12.1.0.3.0)

  EMAS

  EMCORE

  emcoreclient_jar

  emcorecommon_jar

  emcoreconsole_jar

  emcoreintsdk_jar (11.2.0.1.0,12.1.0.0.0)

  emcorepbs_jar

  emcoresdkimpl_jar (11.2.0.1.0,12.1.0.0.0)

  emcoresdk_jar (11.2.0.1.0,12.1.0.0.0)

  emcore_jar

  em_core_ppc_pojo_jar

  em_sdkcore_ppc_public_pojo_jar

  JSF (2.1, 2.1.7 - 01-)

  jsr311-API (1.1.1,1.1.1)

  JSTL (1.2,1.2.0.1)

  log4j_jar (1.3,1.2.15)

  ODL.clickhistory (1.0,12.1.3)

  ODL.clickhistory.WebApp (1.0,12.1.3)

  OHW - RCF (5,12.1.3.0.0)

  OHW - uix (5,12.1.3.0.0)

  Oracle.ADF.dconfigbeans (1.0,12.1.3.0.0)

  Oracle.ADF.desktopintegration (1.0,12.1.3.0.0)

  Oracle.ADF.desktopintegration.Model (1.0,12.1.3.0.0)

  Oracle.ADF.Management (1.0,12.1.3.0.0)

  Oracle.BI.ADF.Model.slib (1.0,12.1.3.0.0)

  Oracle.BI.ADF.View.slib (1.0,12.1.3.0.0)

  Oracle.BI.ADF.WebCenter.slib (1.0,12.1.3.0.0)

  Oracle.BI.composer (11.1.1,0.1)

  Oracle.BI.jbips (11.1.1,0.1)

  Oracle.dConfig - infra (2.0,12.1.3)

  Oracle.jrf.System.Filter

  Oracle.jsp.Next (12.1.3,12.1.3)

  Oracle.pwdgen (2.0,12.1.3)

  Oracle.SDP.client (2.0,12.1.3)

  Oracle.WebCenter.composer (2.0,12.1.3)

  Oracle.WebCenter.Skin (2.0,12.1.3)

  Oracle.WSM.Console.Core.View (1.0,12.1.3.0)

  Oracle.WSM.seedpolicies (2.0,12.1.3)

  orai18n-ADF (11,11.1.1.1.0)

  OWASP. ESAPI (2.0,12.1.3)

  State-Management-Provider-Memory-rar-12.1.3

  UIX (11,12.1.3.0.0)

  webapp

  WebApp1

  wls_jrf

  wls_reconfig_jrf_12

  WSIL-wls (12.1.3.0.0)

  +++++++++++

  Our problem:

  Of view1.jspx on click commandButton1, we cannot call taskFlowCall1.

  During the click on we see view1.jspx refreshes, but should be called view2.jspx.

  +++++++++++

  Sources

  -adfc_config.xml-

  <? XML version = "1.0" encoding = "windows-1251"? >

  " < adfc-config xmlns =" http://xmlns.Oracle.com/ADF/controller "version ="1.2"> "

  < view id = "View1" >

  View1.jspx < page > < / print this page >

  < / view >

  < task-flows-call id = "taskFlowCall1" >

  <-flow-reference to tasks >

  /Web-INF/taskFlowCall1.XML < document > < / document >

  taskFlowCall1 < id > < /ID >

  < / task-flow-reference >

  < / task flows-call >

  < rule of flow control = '__1' id >

  View1 < of-activity-id > < /-activity-id >

  < control-flow-case id = "__2" >

  TFC < from outcome > < / de-results >

  taskFlowCall1 < to-activity-id > < / to-activity-id >

  < / control-flow-case >

  < / control-flow-rule >

  < / adfc-config >

  -taskFlowCall1.xml-

  <? XML version = "1.0" encoding = "windows-1251"? >

  " < adfc-config xmlns =" http://xmlns.Oracle.com/ADF/controller "version ="1.2"> "

  < - flow - the definition of task id = "taskFlowCall1" >

  View2 < by default-activity > < / default activity >

  < transaction >

  < new-transaction / >

  < / transaction >

  < data-control-scope >

  < shared / >

  < / data-control-scope >

  < view id = "view2" >

  View2.jspx < page > < / print this page >

  < / view >

  < id of task-flow-return = 'Cancel' >

  < result >

  cancellation of < name > < / name >

  < rollback / >

  < / results >

  < / task-flow-back >

  < task-flows-call id = "taskFlowCall2" >

  <-flow-reference to tasks >

  /Web-INF/taskFlowCall2.XML < document > < / document >

  taskFlowCall2 < id > < /ID >

  < / task-flow-reference >

  < / task flows-call >

  < rule of flow control = '__1' id >

  View2 < of-activity-id > < /-activity-id >

  < control-flow-case id = "__2" >

  Cancel < from outcome > < / de-results >

  cancellation of < to-activity-id > < / to-activity-id >

  < / control-flow-case >

  < control-flow-case id = "__3" >

  tfc2 < from outcome > < / de-results >

  taskFlowCall2 < to-activity-id > < / to-activity-id >

  < / control-flow-case >

  < / control-flow-rule >

  < / task-flow-definition >

  < / adfc-config >

  -view1.jspx-

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "version ="2.1"xmlns:f =" " http://Java.Sun.com/JSF/core "

  ' xmlns:af = ' http://xmlns.Oracle.com/ADF/faces/rich "xmlns:h =" http://Java.Sun.com/JSF/html ">

  < jsp:directive.page contentType = text/html"; Charset = UTF - 8 "/ >

  < f: view >

  < af:document title = "view1.jspx" id = "d1" > "

  < af:form id = "f1" >

  < h:commandButton value = "commandButton1" id = "cb1" action = "tfc" / >

  < / af:form >

  < / af:document >

  < / f: view >

  < / jsp:root >

  ++++++++++++

  Pls help me.

  We found a solution to the problem yourself.

  Our solution:

  On each page that uses the activity to call a workflow in the bindings, we added the executor of the ADF task flows Bindings type - taskFlow.

  The property is set (in my example):

  ID - taskFlowCall1

  taskFlowId - /WEB-INF/taskFlowCall1.xml#taskFlowCall1

  That's all.

• Blue screen after with VM stand-alone converter P2V conversion

  Hello

  I started to implement VMware in my company.

  I installed standard Vspahere 5 withouth any problem and made all configurations.

  For the moment I want to convert the physical server, the virtual machine and for this I have download VMware-converter stand alone.

  I fist he installed on a Windows 2008 server that I want to convert.

  The conversion was adopted without any error message but in the end the virtual machine cannot start normally.

  I have a blue screen with thos messages:

  "Launch Startup Repair tool" or "start windows normally".

  I converted to the other servers, but I don't know how to proceed with this error message.

  Please could someone help?

  Thank you

  Above all this happen, after the virtual machine is converted the selected SCSI adapter would be logical bus, because of which the VM throw a blue error screen.

  change the logic of the bus at LSI logic (windows 2 k 3, 2 k 8, vista)

  How to change see below KB:

  http://KB.VMware.com/kb/1002149

  Please allow points for correct/good answers by clicking on the tabs

• Adding a second drive to a dv7-2180us

  I recently bought a new dv7-2180us to replace my older zv5000 of 5 years who has been/is having supply problems. I want to take the drive of the zv5000 and place as a 2nd hard drive in the new laptop (mainly because I don't want to have to fight to keep the old lit long enough to transfer files). Is it possible to do so, and if so do I need something more to mount the drive.

  Thanks for any help.

  Sabrina

  Not exactly. The drive is not compatible with the equipment of the new HP. (IDE connector old to a more recent IDE to Sata connector.)

  You could get an external enclosure and get this support, or you could get a cable adapter, like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16812156015

  I recommend the latter, myself. I have one and it works fantastic for information on older hard drives. It does not have technical knowledge to use, but I think you could probably understand.

• Problems adding a hard drive to a Windows 2003 client

  I am trying to add a hard drive to a guest VM on a host running ESXi 4.1.0 standard. It is a historical system that we must keep and maintain for another 1 & 1/2 years. There are 15 comments on this host.  The local database has 1.63 TB of storage with 868,85 Go free. All comments thick supply usage.

  The prompt, I work with is a Windows 2003 R2, 32-bit, Service Pack 2, Standard Edition.  Currently, I have two drives C: = 80 GB, & E: = 20 GB. I am trying to add a third hard drive of 300 GB.  When I try to add the 300 GB drive, I get the following error message. "Disk capacity was not properly formatted or was out of reach.  It has been replaced by the nearest acceptable value. " Value, it is replaced by what is 256 GB.

  I used the same Windows operating system to create three other similar servers with the largest hard drive = 100 GB C:, E: = 100 GB, & F: = 1.5 to.  Microsoft's web site, said that this operating system can handle 2 TB of storage.  The only difference with the other hosts three, that's they run vSphere 5.5.

  The size of the block of your VMFS datastore is the limiting factor, the bottom suggest that your datastore to VMFS-3 has been configured with 1 MB block size where the maximum virtual hard disk and the file size would be 256Go.

  See below for the limits provided by VMFS-2 and VMFS-3 block sizes.

  Block size	Large virtual disk on VMFS-2	Large virtual disk on VMFS-3
  1 MB	456 GB	256 GB *.
  2 MB	912 GB	512 GB *.
  4 MB	1.78 TB	1 TB
  8 MB	2 TB	2 TB minus 512 B *.

• External drive not recognized after Format using NTFS

  I tried to get an external hard drive to my NAS for a few hours now.

  The drive mounted in the past.

  I tried to format my drive USB 3.0 external Toshiba 5 TB using a Windows 10 PC to NTFS.

  Now when I plug the drive at the back USB port, it will not mount.

  Any ideas on how to get it to rise again.

  Thank you

  Hi McRob1,

  Let's close this message and continue the other that you started.

  Kind regards

  BrianL
  NETGEAR community team

• The message indicates that after running a stand-alone program

  I met a strange problem when starting to run the program, which is an installation program created to 8.5.

  The window displays

  

  even I'm not using Web server. How to do around this issue?

  Thank you

  Ott

  In LabVIEW, all settings in tools-> Options are saved to ...\Program NIUninstaller Instruments\LabVIEW 8.5\LabVIEW.ini

  If you create an executable .exe this .exe has its own ini - file, located in the same direcory as the executable file. The name of this ini - file is .ini. In .ini, you can do the same parameters as in LabVIEW.ini.

  So, if you speak of an executable: changes in LabVIEW.ini via the tools-> Options dialog box has no effect .ini

• Problem installing 11.1.2.4.0 ADF libraries on stand-alone Weblogic 10.3.6

  Hello world

  I was really struggling for the last week to install the latest patches to use ADF 11.1.2.4.0 on Weblogic 10.3.6.

  I install a new server Weblogic on Solaris 11.1.  I followed Note 1328698.1 , step by step and everything seemed

  install without errors.  When you try to deploy a simple application of the ADF (just a button, with no model project), I get noclassdeffound MapProxyServlet class.  I have

  get the same error when you try to run 'EM.

  If I look in the tasks, I can see that the class exists in the DVT - faces.jar.

  If I add all the libraries of the ADF to my ADF project, everything is fine, as expected.

  Please help me with any direction on this issue.

  Thank you!

  Chris

  Sorry, no, I do not use Solaris, I use Oracle Enterprise Linux 6.4. So you might found a bug in the solaris patches.

  You should ask management to check this. You have no problem to install 11.1.2.3.0 in Solaris, I assume that something is wrong.

  Yes, the web service is ideal to address things like that.

  Have fun.

  Timo

• New HP and adding a second hard drive

  Just bought a HP Pavilion HPE h8xt, will, adding a second drive, and once that happens, the warranty? The second hard disk will be the data from my old computer and serve storage.

  Hi TIF

  Who should not void the warranty unless you damage the hardware while making it... for not to spill a drink on your PC

  Here is a support document which should help you to install the second disk hard after PC arrives:

  http://support.HP.com/us-en/document/c02862607

  I hope this helps.

• HP Pavilion 510n - adding the Second hard drive?

  A few questions...

  1. is there a size limit for any player second, I would like to add?

  2. What is the procedure for adding the second disc?

  -J' added a second drive to an OLD pc before and it involved linking the second slot on an IDE cable, change the jumper on the slave drive settings, and modify the bios settings... it would be similar?

  Hello TSobiech, it is always best to ask to order a part that is not compatible with a certain system.

  The hard disk that you show the link should work perfectly. Even if it's an ATA100, and your system supports ATA33/66, this disc should still work but will be downclocked to ATA66 speed.

  Here is another link to a 250 GB IDE HDD if you might be interested.

  You won't notice much, if any, degradation in performance to the difference in speed. These IDE drives are higher than the price a SATA with the same capacity, but they are becoming harder to find.

  Since you want to be using as operating in car system, but just a backup drive, they want to make a difference.

  If you want to make use of the full speed of ATA100, you could add a map of IDE controller supporting ATA100, but I really don't think it would.

  Since you mentioned the intermediate layer of IDE as not being used, you can connect the new drive to this connector.

  Now, there are a few things that you should check that you install the new hard drive. These are the connectors of jumper on hard drives.

  This is the very small plastic with metal inserts, at the end of the hard drive where are the other connectors.

  I always use the CSEL (CS) on two hard drives. Readers may already have jumpers to this setting (jumpers connection), but if not, you must set two hard drives the selection of cables (CS).

  Since the current IDE hard drive is the boot hard drive and an ATA66, it must be connected to thin ribbon cable connector, as it is now, and the new hard drive attached to the middle connector IDE. The slowest speed of the two hard drives will result in two hard drives running at the slower of the two speeds. It will work very well.

  You need to partition and format the new hard disk before it can be used. This can be done from Windows if necessary.

  I hope this helps.

• Satellite P500-12D adding 2nd HARD drive

  Toshiba UK say it is not possible to install a second drive in a P500-12D.
  The reason seems to be that the "bowl" for the second disk drive carrier is not sold.
  I was also told that the second drive Bay could not be used "on the model" but the sata connection is there and inserts brass threaded in the case of the scree of the carrier are present.

  The Bay is deeper than 1 Bay (for the thicker > 500 GB drives and, therefore, the support unit for the 1st Bay can be used - entire centres are also different.)

  Ideas for a work around?

  Sorry for the spelling mistakes - my original message would not be accepted "your message contains profanity or inappropriate language.
  In the interest of your fellow forum users, we ask you to change your message.
  "but no indication as to where." Maybe it's that the things happening in the threaded inserts are not allowed

  Peter K

  > The reason seems to be that the "bowl" for the second disk drive carrier is not sold.
  The reason is that there are different configurations of P500
  The P500 and other series of Toshiba laptops are equipped with different motherboards.
  Not all motherboards support 2 HARD drive controllers.

  This can be a bit confusing for someone buying a laptop and see the second HARD drive Bay, but if you would remove the 2nd HARD drive Bay cover, then you will see that there is no HARD drive connector.
  This means that you will not be able to use the second HARD drive.