Problem after installing the driver VGA for HP Pavilion 1212TX g4

Similar Questions

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• can not install the driver wifi for my pavilion 1008em g7

  Hi, this is my network controller u can me sent the good driver for wifi adapter? Thank you

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Hello:

  You need this driver...

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

• Problem to install the driver for the AMDA00 interface

  I have problem to install the driver for the interface of AMDA00 under the system of the device. I am using ASUS motherboard H87 - more.

  When I update the driver it is a prompt window found driver software, but has encountered an error trying to install it, 'access denied '.

  Get the drivers on the site of Asus, specific support to your me board

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• Blue screen after installing the driver for windows phone 7

  Hi all

  I installed the new version of Zune. When I connect my Windows 7 phone (HTC Mozart) to my computer (Vista SP1), the driver will install automatically. After that, he tells me to restart. When I do this, and when windows starts again, theres a BSOD with the following message:
  Driver IRQL not less or equal
  This only happens when I installed the driver for my phone.
  Once windows restarts and gets me to error checking etc and after that, it tries to start Windows again go through the process of "update configuration". Naturally the updates are not properly configured, and it restarts and tries to restore changes. This pretty much goes in a loop forever, until I restart, run in safe mode.
  I have no idea why what is happening, and search on Google did not help so far. Any help would be appreciated.
  Thank you.
  Euler

  The minidump files show the recent errors are errors IRQL_NOT_LESS_OR_EQUAL (a) and the cause of the error is OA001Vid.sys.

  The OA001Ufd.sys also seems to be involved in the accident.

  These two drivers seem to be the drivers for the integrated webcam.

  What you might try is the next update for the webcam to the laptop:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R213648&SystemID=STUDIO1737&servicetag=&os=WLH&osl=en&deviceid=16027&devlib=0&typecnt=0&vercnt=4&catid=-1&impid=-1&formatcnt=0&libid=17&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=302206

• Satellite P100 - display problem after installing the Samsumg software

  Hello

  I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

  I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
  Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

  I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

  I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

  Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
  Thank you very much
  Ivan

  Hello

  This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

  I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

  Have you already solved your problem or you are still looking for the solution?

• Envy of HP dv7-7332ea: having problems to install the driver of HP wireless button

  Hi all

  I would really appreciate some help here. Recently, I did a factory rest on my laptop dv7 HP Envy but can't reinstall Windows 10.

  Before doing this, I was told that I need updates of Windows 8 to 8.1, and then to Windows 10.

  However, I am unable to Al of Windows 8 to 8.1 Windows I'm not all the drivers installed.

  For some reason, I am unable to install the driver of HP wireless button. Whenever I try to download through Windows Update in Control Panel, it downloads and after installation displays an error code 80070436.

  I am unable to get this driver installed and therefore cannot be updated to Windows 8.1. I tried to update to 8.1 without the driver, but my laptop is restarted it got stuck at 82%.

  I would be grateful if someone could give me some advice or help get this sort I seem to keep hitting a brick wall.

  Thank you very much

  Ian :-)

  You are the very welcome.

  You will be able to install W10 directly without the need to spend any other OS.

  I did it several times already, so I know it works.

  Twice on nine discs in a solid state on laptops that had previously been W10 on the old mechanical hard disks.

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• No option available after installing the plug-in for Microsoft Visual Studio 1.2

  Hello!
  I am a developer of a new blackberry, and I'm doing my first sample.
  I have experience with Microsoft.Net (Asp.Net and Vb.Net) but I've never done anything to a smartfone.

  So, I followed these steps:
  -J' read the documentation.
  -J' downloaded the "plug-in for Microsoft Visual Studio 1.2";
  -J' downloaded 'Simulator 5.0. "
  -J' installed the "plug-in for Microsoft Visual Studio 1.2";
  -J' installed the Simulator "5.0".

  Everything worked fine (I received no error message).

  After that, I tried to initialize a "Hello World" application in Visual Studio 2008, but I can't find any blackberry resources. There is no options in any menu of Visual Studio, there is no new project type, there is no option on the menu "Add-in manager.

  I found a video saying where to find the browser "BlackBerry" in menu "browser with...» "my project (when I click with the right button mouse), but this option is not there. I have not all references to the library or just about any BlackBerry resources on my VS2008.

  Can someone help me?

  I am grateful for your attention.

  Best regards

  João Paulo.

  [email protected]

  Check out the following thread... It should give you the manual steps on how to get the BlackBerry browser in the dialog "Browse with.."

  http://supportforums.BlackBerry.com/T5/Web-development/I-don't-see-BlacberryBrowser-in-quot-Browse-wi...

• How to install the driver jdbc for sql server 2005 in sql developer 4.0?

  
  Hallo all

  I need to access the tables in a MS SQL Server 2005 database.

  The JDBC driver is possible.

  How to install this driver?

  Thanks a lot for your messages.

  Hello

  It's the documentation-

  Database: third-party JDBC Drivers

  The component drivers JDBC third party specifies drivers to use for connections to the third-party databases (non-Oracle), such as IBM DB2, MySQL, Microsoft SQL Server or Sybase Adaptive Server. (You don't need to add a driver for connections to Microsoft Access databases.) To add a driver, click Add an entry and select the path for the driver:

  For Microsoft SQL Server or Sybase Adaptive Server: jtds - 1.2.jar, which is included in the download of jtds - 1.2 - dist.zip

  To find a specific third-party driver, visit the appropriate site (for example, http://www.mysql.com for MySQL Connector/J JDBC driver for MySQL, http://jtds.sourceforge.net/ for the for Microsoft SQL Server and Sybase Adaptive Server jTDS driver, or search for Teradata JDBC driver to http://www.teradata.com/ ). For MySQL, use the driver in MySQL 5.0 not 5.1 or a later version with the version of SQL Developer 1.5.

  You must specify a third-party driver or install a driver using the check for updates feature before you can create a connection to a database to third parties of the associated type. (See the tabs to create connections to the databases of third parties in the Create/Edit/Select database connection dialog box).

  Alternative:

  As an alternative to the use of this preference, you can click Help, and then search for the updates install the for Microsoft SQL Server JTDS JDBC driver and the driver of JDBE of MySQL as extensions.

  Kind regards

  Mike

• Problem after installing the new drive on Pavillion G6-2320

  The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

  After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  The F2 System Diagnostics).

  I went to F2 and test the hard drive. Everything was made. Help please!

  Thank you

  Hello:

  You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

  HP is not delivered replacement hard drives pre-configured with any software.

  They should also ship you the free of charge from the PC recovery discs is still under warranty.

• Problems to install the driver for printer HP Photosmart C4580 point Windows 8.1

  I bought a new laptop (Asus i7 with Win 8.1) and I'am trying to install the current driver for my HP Photosmart C4580 printer. I downloaded the driver full HP website: size 233 Kb, but when I try to install it I get the same message: ' Impossibile find it file specificato: c:\Users\Appdata\Local\Temp\7zs08EC\Setup\hpzpnp.ic...» »

  Please help me. TXS a lot.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Problems after installing the second SATA drive in Windows 7

  I just install a second SATA hard drive in Windows 7. Currently, I use only a processor AMD Athlon X 2 4800 with 3 GB of RAM, Windows 7 64 - bit, installed on a 400 GB Samsung SATA drive and have two (a pioneer and a Liteon) DVD burners.

  System worked fine until I put in the new drive. Previously, I had hung as such discs: SATA1 was the existing 400Go drive, SATA2 and 3 were two DVD burners (don't ask me why, I have 2, will remove one of them, if that's the problem).

  Installed the new HARD in the SATA4 drive. Booted up, saw the new drive in the BIOS, but Windows does not see it until I went to disk management, a drive letter assigned and formatted etc. Also, I swapped the drive letters so I had all of the HARD drive (I have my 400 GB split into two readers via the partition) and C: D: E: F: and G:, DVD players.

  Started, began to transfer data from D: to the new E:, and Windows crashes. No message error, everything freezes. Need to reset, and then allow Windows to check for errors etc. Return to Windows, same case again. I swapped the SATA cables so that SATA1 and 2 are the HARD drives and SATA3 and 4 are DVD players. Reboot, same case.

  What I am doing wrong? Or what should I do? I don't even have to start the transfer of data I just let WIndows running for 2 minutes and it automatically hangs again.

  If someone could help me as soon as POSSIBLE please, it would be fantastic. Thank you!

  I've been in contact with the provider, and Yes, that will take it back for Exchange. They gave me some ideas to try first, I'm going to do tonight; They asked me to check if the HARD disk is running on series complete ATA (SATA) mode and to enable the DMA if he asks me to. Otherwise, they said, try the fail-safe mode. Don't know if any of them are currently enabled etc but will find tonight.

  All else fails, I take that back! Simply means a 3 hours trip to Melbourne to make...

  Thanks again guys for your help.

  Michael.