problem after service
Ive had my phone on the service, surprise, nothing is better except the cracking of the screen that is exchanged.
And now I've got a ring when I run my finger 1-2mm above the glass, when I touch the glass it disappear.
I managed to get the ring on the photo, look at the link.
https://www.dropbox.com/s/4e5u4xkzvtr5cpl/Screenshot_2014-09-12-11-28-29.PNG?DL=0
RobbinB85 wrote:
Ive had my phone on the service, surprise, nothing is better except the cracking of the screen that is exchanged.And now I've got a ring when I run my finger 1-2mm above the glass, when I touch the glass it disappear.
I managed to get the ring on the photo, look at the link.
https://www.dropbox.com/s/4e5u4xkzvtr5cpl/Screenshot_2014-09-12-11-28-29.PNG?DL=0
The ring you see apparent glove Active Mode. Usually, he shows that, to register for a key when you do not use the appliance with, well, gloves. Or in your case, a light touch on the screen that you do not feel.
Turn off in settings > display and everything should be good.
Tags: Sony Phones
Similar Questions
-
Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc
My pc runs Windows XP Home Media edition. I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions." To maintain the stability of the system. Windows must restore the original versions of these files. Install your Windows XP Professional CD2. I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3. How can I stop this happening?
Hello
Step 1: I suggest you perform the SFC scan on the computer and check.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, type the following line and press ENTER:sfc/scannow
Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
Problems with services of automatic startup after Windows Update problem
These are probably related to many things I tried trying to solve the problem of Windows Update - until I found the answer to Fix It. That fixed my Windows Update, but now I have these problems.
I tried to run the bat file that Sohail suggested in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/41f1d01e-e787-479b-83de-c66f40a23a37/
He ran with errors, so I suspect he undid some things and then they don't get put back.Those that I know I need is:
Windows Audio
DHCP clientThese two begin very well once the system is in place, but I have to do it manually. They still claim to be automatic when I view in the Services management tool.
I also noticed that the following services are set to automatic but have not started either. Is this a problem?
Task Scheduler
TCP/IP Net BIOS Helper
Windows event log
TPM Base ServicesSo, how do you restart automatically?
Problem posted in another thread to improved Performance. Long story short - a repair settled with Vista DVD. He fixed the problem of services, but the problem of Windows Update is back.
-
Restart the problem after booting on Satellite Pro L20 - approx. 4 seconds
I have a toshiba satellite pro l20 series and it worked fine until yesterday.
the problem is that it restarts... Well actually, he stops in about 4 seconds after the start, remains closed for 1 or 2 seconds and then again
same problem occurs with or without the battery.
all I see is the Toshiba logo. I can enter the bios and when in the bios it does not stop.
When I get out of the bios, saving the changes he stops. and then begins by itsself after 2 seconds.
Please help me... How can I fix?Hello
If the laptop goes through the Toshiba logo then maybe there is just something wrong with the software.
In this case, the first step should be again install the Toshiba Recovery CD.
Put the CD in the drive and try to boot from the CD.
After installation, all should work properly.
If it's not, so I guess there is a serious problem and service guys should check the laptop. -
Hello!!!
IM Apple Fan.
Purchased IM Ipad2, Ipad4, Iphone6
Last month I already buy s Iphone6 +.
Today I feel unhappy
MY IPHONE 6 'history '.
My touch screen has a problem after downloading the IOS 9.0.2.
Already called and try apple advises the steps. But the problem still occur.
Already done restart of strength. Factory setting Reset also possible. But still the same problem.
Only can be used for a minute. After that... The problem comes in again & again & again...
APPLE.COM
Can U help me
Only products of Apple of love before updating the version 9.0.2
iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.
-
Boot problems after installing Vista SP2 (KB948465)
I installed SP2 via update. During the update process there was a power failure. After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup. Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.
After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start. After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
I immediately did a system restore to return my PC before SP2 was installed.After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed. It was on 9 November. As I need my computer, I didn't reinstall SP2 until I had finished this work.
As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2. Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.
Between the 10th and today, 14, Windows Update has installed more than updated.
Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
I tried to uninstall SP2 via update. The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure. I used the power switch to turn the PC back on. After startup, the PC told me that deletion failed.Then I tried the system restore. Unfortunately, the first available restore point was post - SP2 installation. I restored it for the point that is as close as I could. I tried to uninstall SP2 again through Windows Update. This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.
I haven't restarted my PC since then. Most updates have been downloaded automatically, and the PC tells me that a restart is required. I'm a little worried that I will end up with a completely insensitive PC.
I use an Acer Aspire X 3200 with Vista home premium pre-installed. I don't have a Vista disc.
Hello, Alex
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem
It's almost certainly a driver problem.
Please tell the service pack on your Windows® XP Pro level forum and the manufacturer and model of your system, if it is conditioned, or the make and model of your motherboard if it is not. In addition, please tell us the manufacturer and model of the optical drive.
First of all, if there is a system, go to the support Web site of the manufacturer for your system model. If this is not a system, go to the support Web site of the manufacturer of the motherboard for your model of motherboard. In the first case, you should find the drivers, chipset in particular drivers, updates and software for your system. Install all the that apply. In the second case, you will find the drivers of integrated devices, chipset, updates and software for your motherboard drivers. Yet once, install all the that apply. As we know nothing on the optical drive other it is attached via SATA, I can't talk about what to do there except that you should go to the manufacturer's support Web site and search for drivers and updated firmware for your model.
It would have been helpful if you had provided more complete information on the installation of Windows, your system hardware and the optical drive. The most complete information; more answers you will get. Please, read:KB555375 - how to ask a question.
Don't forget, no member of this forum is omniscient.
-
Hello! I use a Toshiba laptop.
I was playing a game and windows update popped up!
He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.
He will appear with the options
'Safe Mode '.
"Safe mode with network.
"Safe mode with command prompt.
"Last good known Configuration".
"Start Windows normally".Whichever one I choose Windows XP logo appears, then crashes immediately, restart.
So I tried to use "do not restart in case of shutdown"
And the blue screen appears
"stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).
What is this error? I can't enter safe mode by the way!
Thanks for your help.
It's http://support.microsoft.com/kb/330182
Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.
If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.
If you cannot start the computer, go to the next method to update the BIOS of the computer.
For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:
315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery ConsoleMethod 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.
Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:
- If a driver is listed by name in the Stop error message, disable or remove that driver.
- If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
- If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
- If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
- Disable or remove drivers or services that you recently added.
- Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)
Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:
316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XPMethod 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:
- Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
- Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
- Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.
Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.
- Restart the computer.
- Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.
Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.
-----------------------------------------------------------------
You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you! - If a driver is listed by name in the Stop error message, disable or remove that driver.
-
Problems after installing KB978338 on Windows Vista SP2
I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.
System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.
I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.
Please tell us how can I still troubleshoot or solve this problem.
Thanks in advance.
JohnBrown
Halifax, NS
So I "hid" the update and you call this one closed without resolution.
While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.
Repost:
See the section "How to get help" of http://support.microsoft.com/kb/978338
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
https://consumersecuritysupport.Microsoft.com/For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Problem after installation of window upates
Original title: windows 7 problems because microsoft updates this week
Hello
Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.
Most of the time there was no internet connection, although my laptop in the same room connects.
Worse, it's his slider has the circle of rotation that continues for hours.
I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...
I'm not grumpy, so don't want something complex to do.
Without a doubt-related updates.
His computer crashed the first time they went, in automatically.
When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.
Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.
Any suggestions?
Do not clean the computer and reinstall, so please do not suggest that.
My deep gratitude.
JM
Hello Craig,.
I understand the inconvenience you encountered.
According to the description, I understand her you are facing problem after installing windows updates.
I would be grateful if you can provide us with the following information to help us better understand the issue.
Did you do any change important before this problem?
What is the brand and model of your system?
Are you an error message\ error code on your system?
To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.
Method 1.
Step 1. Try to go into safe mode with network and check.
Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.
To switch to safe mode see the link given below
Try to go to safe mode with networking and check.
http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode
If the problem does not exist in safe mode, try to perform a clean boot and check.
Step 2: Perform the clean boot.
Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.
Reference: How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.
If the problem persists, try Method 2.
Method 2 System File Checker.
You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.
Use the System File Checker tool to repair missing or corrupted system files.
http://support.Microsoft.com/kb/929833/en-us
Hope this information is useful. Please let us know if you need help with Windows.
Thank you
-
Huge problems after updateing to 31.1.2
Hello
I encountered several problems after the update to 31.1.2.
1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:
The message send failed.
The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.I have control over the mail server and reflected on the Messaging log and it said:
2 Oct 17:08:37 droplet postfix/smtpd [10916]: connect from unknown [xxx.xxx.xxx.xxx]
2 Oct 17:08:37 droplet postfix/smtpd [10916]: lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
2 Oct 17:08:37 droplet postfix/smtpd [10916]: disconnect from unknown [xxx.xxx.xxx.xxx]When I try to send mail.
2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.
3. all my entries in the missing calendar which is a very big problem for me.
Best regards
Andrija
Close Thunderbird and go to your profile folder.
There is a subfolder "extensions".
Find the folder for both the lightning and Enigmail under "extensions" and delete them. -
Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version
Hello.
I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.
The initial problem appeared after I tried to disable "open Panel - Power on" setting.
This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
Another feature that I can't edit's startup speed.
It remains fast even if I tried to change to normal.I'm on Windows x 64 8.
The case is now.GROUP OF EXPERTS
HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
STARTUP SPEED
HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.My questions are.
1. it can be the cause?
2. How can I reset all of the values in the Bios to see if that fixes anything to start?
3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.
I will be grateful for any given solution. Thanks in advance.
Can you please tell us which model of laptop you have exactly (the complete model name)?
-
problems after the automatic updates
I have Pavilion g7-2235dx with Windows 8.1 operating system. Almost all automatic up-to-date mess to the top of my ability to get on the internet. The only way I can connect is to uninstall all updates. The icons on my desktop has also stopped working. When I click it, it will immediately on the desktop. Cannot pin them to the taskbar either. Those on the taskbar does not open by clicking on them either. Have to click straight and say to open. Also problem get my Norton antivirus to open. Says it works but can not open it.
Hello
It might be, the upgrade to Windows 8.1. I've seen people with complications get the upgrade to go "smoothly".
You can try, do a system update that would take you back to Windows 8. See if you have the same problems after updates.
If you choose to update again, make sure that everything is already successfully updated. -
TFncKy.exe problem after upgrade to XP SP3 on Satellite A200
Hello
After upgrade of XP SP3, I have problem with TFncky.
_System_:
A200/PSAE7
-XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)_Problem_:
After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:+ AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
+ ModVer: 5.1.2600.5512 Offset: 00012ace +.With one of the following keys on keyboard always results in above described error pop up but key are functional:
WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.
As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.
BTW:
What driver package includes "tfncky.exe? Toshiba controls?Thanks in advance for any information or advice for this problem!
Best regards
AndreasHello
the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082
The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.
In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.
See you soon
-
I'm having problems after the restart with docking station, applications, etc.
OS X: 10.11.3
Mac Pro 2010 2 x 2, 66 GHz 6-Core
Graphics NVIDIA Quadro 4000 card
24 GB Ram
50 GB of free memory
4 additional hard disks
Hello community,
I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.
Help, please.
Lars
Please, back up all data before proceeding.
This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to step 2.
Triple-click anywhere in the next line to this page to select this option:
sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text in the Clipboard by pressing Control-C key combination.
Launch the Terminal application integrated in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.
You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.
The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.
Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.
If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.
Select
Utilities ▹ Terminal
in the menu bar. It will open a Terminal window. In this window, type this:
resetp
Press the tab key. The partial order you entered will automatically end this:
resetpassword
Press return. Opens a window to reset the password. You do not need to reset a password.
Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.
Select your username in the menu option allows you to select the account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the reset button.
Select
▹ Restart
in the menu bar.
Maybe you are looking for
-
Caseback C655 15.6 fit model C665
I have a satellit c665 pro can't find a botom deal because it bur I can find deal bottoms for the c655 both are 15.6. On the photos, they are exactly the same. Can someone tell me if it will work. Thank you
-
Why doesn't it let me create an Apple ID?
Why doesn't it let me create an Apple ID?
-
Satellite L20-214: yellow exclamation Ethernet controller - error code 28
Hello in device manager ethernett controller has a yellow exclamation point.When I click on update drivers it says error no driver found error code 28. can someone please help do not have any idea what that's all.see you soon
-
IPhone more heated 6s all of a sudden.
IPhone more heated 6s all of a sudden.
-
Microsoft expression are not work says cannot load ftpsrvutl.dll
Microsoft expression are not work says cannot load ftpsrvutl.dll