Problem, assess the iterations

Hello

I have a following script

mu_B = Zeros (1,21);

for i = 01:21
County = i;

j = 1: 125

mu_B (i) = mu_B (i) + (j) * R (Count);
Count = count + 21;
end

end

created in LabVIEW

Do not get the required results and again I am not be able to know if it's an exact equivalent of the script mentioned above. Need help.

Kind regards.

Your script describes a matrix multiplication, mu = R * a, where mu is a (column) vector of 21 items, R is a matrix of 21 lines and 125 columns and a (column) vector of 125 lines.  In your case, R is a 1 d array, so we need to make a 2D with 21 lines and 125 columns table.  Once we do that, the problem is very simple to solve.

It will be a good exercise for you to do by yourself (and we will help you, if you get stuck).  There is a function in the table palette called table of reshape - wire R on the left and your two index, 21, then (pull down) 125), and you will get the form R 2D on the output.  Integrate a loop For of R - have - you noticed the "tunnel of indexing" (it looks like a square within a square)?  If you look at the wire inside the loop, it isn't a double line, i.e. a 2D picture, but a single line, which means that it is a line of the table 2D.  You don't need what whether wire in the connector of the loop For - it automatically scroll each of the 21 lines of R.  Now put one in the loop - here you don't want indexing tunnel (because you want the table in its entirety, all 125 items, inside the loop), then right click 'a' tunnel and choose "disable indexing."  Now you have two arrays of 1 d 125-element, you need to multiply, element by element, - that's exactly what the LabVIEW function multiply.  Wiring of the output of this multiply through the loop For (notice another tunnel of indexation, this time turning each of 21 iterations of the loop in an array of 21 items, "mu".)  And you're done.

So, what do you need to solve this problem?  A remodel, a loop For and the other multiply to operate.  Give it a try.

Bob Schor

Tags: NI Software

Similar Questions

  • ADF - problem of the iterator

    Hi all

    I have a next page definition:

    + <? XML version = "1.0" encoding = "UTF-8"? > +.
    + < pageDefinition xmlns = "http://xmlns.oracle.com/adfm/uimodel" +.
    version = "11.1.1.54.7" id = "fileListingTryPageDef".
    Package = "View.pageDefs" > "
    + < Settings / > +.
    + < executable > +.
    + < iterator lie = 'root' RangeSize = '25' DataControl = "fileManager" +.
    ID = "fileManagerIterator" / >
    + < accessorIterator MasterBinding = "fileManagerIterator" lie = "fileNames".
    RangeSize = "25" DataControl = "file manager".
    BeanClass = "java.lang.String" id = "fileNamesIterator" / > "
    + < / executables > +.
    + < bindings > +.
    + < tree IterBinding = "fileNamesIterator" id = "fileNames" > +.
    + < nodeDefinition Name = "fileNames0" > +.
    + < AttrNames > +.
    + < item Value = 'Elément' / > +.
    + < / AttrNames > +.
    + < / nodeDefinition > +.
    + < / tree > +.
    + < / links > +.
    + < / pageDefinition > +.


    In the bean to support, I have a following code and it gives me NPE while creating the Row object:

    Links DCBindingContainer = new DCBindingContainer();
    DCIteratorBinding iter = bindings.findIteratorBinding("fileNamesIterator");
    Line r = iter.getCurrentRow ();


    Please advice according to what might be a problem here...


    See you soon,.
    Matthew

    Hello

    Try this code instead of DCBindingContainer();

    BindingContext, bc is BindingContext.getCurrent ();
    Links DCBindingContainer = (DCBindingContainer) bc.getCurrentBindingsEntry ();

    Hope this helps

    Joseba

  • problem - by clicking on the button loses the new line or resets the iterator

    Hello

    I use JDev 11.1.1.6. I created a page that is preceded in the taskflow by a method in the AppModule that creates a line on the iterator and inserts it. I have a button 'Next' in the page, which is supposed to make changes to attribute readonly on the input fields, and display a confirmation button.

    The problem: when I click on 'next', the empty fields that have been entered by the user on the page, is part of the first record in the iterator. It is as if, when the button "Next" has been clicked, the iterator has been somewhat refreshed and moved to the first original line, and entered values have been thrown in there... While my 'new' record is lost. Result: I lose my new record line, and entered values replace the values in the first previous row in the iterator.

    The code used to create the line before the page is loaded:

    Sender ViewObjectImpl = getSubmittersView3_1();

    Submitter.Reset ();

    ViewRowImpl submitterRow = submitter.createRow () (ViewRowImpl);

    submitter.insertRow (submitterRow);

    When the page is loaded initially, I printed the primary key on the line and a - 4 (which is good, it means new line)

    But when I print the primary key in the action of the button 'Next', 59, who has been the pharmacokinetics of the first original line I.

    The code that is used to print the primary key:

    seqNum int = Integer.parseInt (this.getAppModule () .getSubmittersView3_1 () .getCurrentRow () .getAttribute (0) m:System.NET.SocketAddress.ToString ());

    Then print seqNum.

    Please help.

    Found the problem.

    I had a button print at the bottom, which was my button "Cancel". In this paper, I got the code to remove additional items (i.e. unwanted ranks - since it is a Cancel button). And what was going on was that while rendering on the page, the code of the EEG for the go button was running and the removal of my new line! If the culprit here was go get code button is iterated in the rendering phase... something I didn't expect or know so far. Remove this code and change a command button solves the problem.

  • Iterator for the table and form is a problem during the cleaning of the records

    Hello

    I use JDev 12.1.2.

    I have an object of the detail view. I represent a part of its fields in a table and the rest in a form. I use the same iterator. Basically, I dragged and dropped the object even from the view of the data control and created a table and form layout with the fields I wanted in each provision. I put in place a clear feature for the rows in the table with a clear"" key. -on click I delete the line of the iterator in the managed bean. When I do this the selected record is deleted and the next record is displayed. But fields entered in the form layout also gets deleted. (the form should also be showing the record currently selected - it shows but entrable fields in the form are deleted because of claire that I did on the previous line.) If anyone can help get this resolved?

    Not use the same iterator for the tables and forms here? The links are in the row (row.bindings...) for the table, but for the form it is (links...). The Delete on the current row operation is causing the iterator delete all fields of links instead of from the line? Please shed some light.

    Thank you

    UMA

    How do you rank on the iterator compensation?

    use resetActionListener in your clear button and let us know what is happening?

    Ashish

  • problem with the stream

    Hello

    I am facing problem in the understanding of data flow in labview. I use loop within two for the while loop, but my program ends in infinite loops.

    I have attached my VI below.

    I will appreciate for your help

    How do you know if you have endless loops?

    In box 2 of your flat sequence structure, I see a while loop that will run as fast as possible until I = 359, 360, so iterations.

    In part 3, the another while loop which runs at 360 iterations.   It is within an iteration 64 For and within another 64 loop iteration loop For.  I don't see anything that could cause infinite loops.  As if the loop will run a total iterations fo 64 x 64 x 360, 1 474 560.  It of a lot, but is certainly not infinite.  I don't know how long the code will have to run, but I don't see anything here which is particularly time-consuming.

    I suggest you put flags on all of your nodes of iteration and confirm that loops are run infinite times.

  • problem with the bytes to port to read in VISA

    Hi guys,.

    I'm reading device data using usb - BT dongle. It creates the virtual port and read without problem.

    My problem is the packages to send 428 bytes, inside this block device, I have 400 bytes of data bytes 9 to 409. The first 3 bytes of each block is the same.

    4 45 50 - MEP, they are the first 3 bytes of each block of 428 bytes.

    Okay, if you check the vi I config the visa and sending the data of adjustment of the device, read the answer and it sends the data to start sendding data.

    Well, I try to read each block of 428 and show in a chart.

    The problem is sometimes bytes in ports are 428 and anothers shows 23, 2, 125,... is not continuous 428 bytes each iteration and destroy the data graphic.

    IF I check the chart outside of the main loop, I see the correct graph. Apart from mainvi I collect whole data and separate in 428 blocks, extract the 400 bytes of data and analyze the entire signed 16 bit and display in the graphics.

    So, I don't know the best way to get 428 bytes in each iteration... I tried to read directly the 428 bytes but sometimes fail once again, very low reading bytes... take time to wait before read bytes to each iteration. I need a way to get 428 before values to get the readings of 400 data. Even I could probe each beginning of block with 4 D 4550 HEX bytes to pass and got data...

    Perhaps it would be better to use the wait? or using a while loop to wait until I had 428 bytes? Any help will be apprecite.

    Best regards, Fred.

    You receive binary data.  Therefore, turn off the the stop character.

    What happens is that you actually 0x0D in your data.  Playback VISA who sees and then request's made it reading the data.  By turning it off, then reading VISA will read all 428 bytes or until a time-out occurs.

    Let the constant instead of the bytes to the Port.

  • Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    * original title - I'm having a problem *.

    You have the latest drivers?
    http://www.nvidia.com/page/support.html

    Aero - Windows 7 - How to troubleshoot problems with Aero

    (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

    (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

    (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

    (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

    If it does not---> click Start---> right click computer---> click Properties

    Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

    Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

  • How to refresh the iterator of 'detail' ADF liaison with up-to-date data?

    JPA EJB - ADF Databindings JDEV 12.1.3 Application

    I ve a (one to many) (many-to-one)- relationship

    A CGrupo contains a list of UsuarioGrupo

    Oracle JDeveloper 12c - Guardian.jws  Model.jpr  CJDevelopermyworkGuardianModelsrccombanorteaxxiguardianmodelentityCGrupo.java.jpg

    A UsuarioGrupo contains CGrupo

    Oracle JDeveloper 12c - Guardian.jws  Model.jpr  CJDevelopermyworkGuardianModelsrccombanorteaxxiguardianmodelentityUsuarioGrupo.ja.jpg

    I created a page with ADF databindings as follows:

    Note that there is a Master table - table in detail

    Oracle JDeveloper 12c - Guardian.jws  ViewController.jpr.jpg

    And the parameters of the iterator of detail (usuarioGrupoListIterator)

    CacheResults: false

    Refresh: always

    Oracle JDeveloper 12c - Guardian.jws  ViewController.jpr  CJDevelopermyworkGuardianViewControlleradfmsrccombanorteaxxiguardianview.jpg

    Then I run the project and the only recording is displayed correctly

    Oracle SQL Developer  CUsersBWE~1.GMICONTROLCAMBIOS.sql_2.jpg

    But if I delete the folder

    Oracle SQL Developer  CUsersBWE~1.GMICONTROLCAMBIOS.sql_3.jpg

    and then I re run the iterator, but there are no changes in the page


    Oracle SQL Developer  CUsersBWE~1.GMICONTROLCAMBIOS.sql_4.jpg


    Is there a solution for this problem?

    Thank you for your attention and help.

    Ok. If the data is modified by another application you will need to rerun the query on the master (and children collection of refreshment) database (assuming you have JPA caching enabled by default). There are number of ways to make your main EJB Session to use to query the objects method (for example, the query with @QueryHint (name = QueryHints.REFRESH, value = HintValues.TRUE); and FETCH JOINED on children). Then, children are automatically updated in the data control.

  • Performance problem for the ADF calendar

    Hello

    We intend to apply the calendar adf for one of our customers. They will use the calendar as a planner. There will be at least 350-500 activities for a provider and a month.

    We are filtering of calendar data by selecting provider from the drop-down list box. However, execution of the view object takes about 4-5 seconds and activities appear 15 seconds. Total waiting time may be 20 seconds.

    How can I improve performance? Customer will use the calendar as a scheduler of tasks online. Therefore, it must be very fast.

    JDeveloper Version: 11.1.1.6.0

    Please note that all the components are bind to the backup of the attributes of bean whose calendar itself jsff layout.

    Steps for filtering:

    1 combo box action in backing bean:

        public void onResourceChange(ValueChangeEvent valueChangeEvent) {
            valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
            if (valueChangeEvent.getNewValue() != null) {
                if(valueChangeEvent.getNewValue() != valueChangeEvent.getOldValue()) {
                    applyFilter();
                }
            }
            else {
                removeFilter();
            }   
            
            RequestContext context = RequestContext.getCurrentInstance(); 
            context.addPartialTarget(getC1());
        }
    

    2 ApplyFilter and removeFilter in backing bean methods:

        private void applyFilter() {
            DCBindingContainer dcbindings = (DCBindingContainer)ADFUtils.getBindingContainer();
            XxntcCalendarAMImpl am = (XxntcCalendarAMImpl)dcbindings.getDataControl().getApplicationModule(); 
            DCIteratorBinding garageIterator = ADFUtils.findIterator("XxntcGarageInfoVO1Iterator");
            Row currentGarageRow = garageIterator.getCurrentRow();
            Number resourceId = (Number)currentGarageRow.getAttribute("ResourceId");
            am.applyCalendarFilter(resourceId);        
        }
        
        private void removeFilter() {
            DCBindingContainer dcbindings = (DCBindingContainer)ADFUtils.getBindingContainer();
            XxntcCalendarAMImpl am = (XxntcCalendarAMImpl)dcbindings.getDataControl().getApplicationModule();  
            am.removeFilter();
        }
    

    3. the application model Impl applyCalendarFilter removeFilter methods and

        public void applyCalendarFilter(Number resourceId) {
            XxntcServiceCalendarEOVOImpl calendarVo = (XxntcServiceCalendarEOVOImpl)getXxntcServiceCalendarEOVO1();
            System.out.println(new java.util.Date());
            ViewCriteria vc = calendarVo.createViewCriteria();
            vc.setName("fiterCalendar");
            ViewCriteriaRow vcRow = vc.createViewCriteriaRow();
            vcRow.setAttribute("ResourceId", "= " + resourceId);
            vc.insertRow(vcRow);
            calendarVo.appendViewCriteria(vc);
            calendarVo.executeQuery();
            
            /*calendarVo.setWhereClause(null);
            calendarVo.setWhereClause("RESOURCE_ID = :pResourceId");
            calendarVo.defineNamedWhereClauseParam("pResourceId", null, null);
            calendarVo.setNamedWhereClauseParam("pResourceId",resourceId);         
            calendarVo.executeQuery();*/
            System.out.println(new java.util.Date());
        }
        
        public void removeFilter() {
            XxntcServiceCalendarEOVOImpl calendarVo = (XxntcServiceCalendarEOVOImpl)getXxntcServiceCalendarEOVO1();
            calendarVo.removeApplyViewCriteriaName("fiterCalendar");
            //calendarVo.removeNamedWhereClauseParam("pResourceId");
            calendarVo.executeQuery();
        }
    

    Kind regards

    Anil

    Hi all

    Problem is solved.

    There are three important points for the solution.

    1 oracle has proposed to use a separate iterator for suppliers. Here is the explanation of SR Oracle:

    @ The iterator binding of the calendar and the iterator binding of the

    @ suppliers are the same, there is no point at all. Normally, the

    @ the iterator binding calendar is for the events calendar and the provider

    @ the iterator is on another iterator which gives information about the provider, the

    @ provider in the timing of the event is the foreign key to the iterator of provider.

    @You need to create a table for the vendor and then set object entity / view

    @ the object on the table, an iterator will be generated. The provider_id in the

    @ event table should be the foreign key to the table of the provider and the

    @ providerDefinition must point to the iterator of the vo provider.

    @ You cannot use the same table to set the calendar events and providers,

    @ This just doesn't make sense.

    2. I am able to set the iterator range size if I use a separate iterator for suppliers. Otherwise, ADF throws it npe: ' java.lang.NullPointerException: ADFv: calendar activity Id and Vendor Id cannot be null. "

    3. I forgot to use parameters of connection (StartDayTime, EndDayTime and time zones) in my query where clause. Creation of a criteria like this where clause "((HrCalendarEvents.START_TIME > =: StartDayTime) AND (HrCalendarEvents.END_TIME)"<= :enddaytime="" )="" )="" "="" solves="" fetching="" all="" rows="" problem.="" now="" it="" fetches="" just="" current="" time="">

    Kind regards

    Anil

  • Reset the iterator binding

    Hello

    I displays a table based on an iterator binding executable. I click on a line, then a button located outside the table that positions the iterator at the end, add a new line and go to a new fragment:

        private void createRow(String iteratorName) {
            DCIteratorBinding binding = ADFUtils.findIterator(iteratorName);
            //access the underlying RowSetIterator
            RowSetIterator rsi = binding.getRowSetIterator();
            //get handle to the last row
            Row lastRow = rsi.last();
            //obtain the index of the last row
            int lastRowIndex = rsi.getRangeIndexOf(lastRow);
            //create a new row
            Row newRow = rsi.createRow();
            //initialize the row
            newRow.setNewRowState(Row.STATUS_INITIALIZED);
            //add row to last index + 1 so it becomes last in the range set
            rsi.insertRowAtRangeIndex(lastRowIndex + 1, newRow);
            //make row the current row so it is displayed correctly
            rsi.setCurrentRow(newRow);
        }
    

    On this fragment, I Cancel link that removes the added line and the value of the current row to a null value if no line is selected.


        private void cancelCreateRow(String iteratorName) {
            DCIteratorBinding binding = ADFUtils.findIterator(iteratorName);
            RowSetIterator rsi = binding.getRowSetIterator();
            Row currentRow = rsi.getCurrentRow();
            if (currentRow.getAttribute("Id") == null) {
                rsi.removeCurrentRow();
            }
            rsi.setCurrentRow(null);     
        }
    


    The problem is that the last row is always selected. What I am doing wrong?

    Hello

    the link layer has always a selected line. You can't without a current line

    Frank

  • iterator master past RangeSize for detailing the iterator

    Hello


    I use two nested af:iterators to display the controls of production with their positions.

    The master af:iterator poster panelBoxes (production orders) from left to right and buttons detail views af:iterator (positions) inside these panelBoxes from top to bottom.


    our names are very long, so I've replaced it by MASTERVIEW and DETAILVIEW


    < af:iterator id = "iter1' var = 'MASTER' varStatus = 'i '.

    lines = ' #{bindings. " MASTERVIEW.rangeSize}.

    value = "#{bindings." MASTERVIEW.collectionModel}.

    Binding = "#{pageFlowScope.DrmaNavi.drmaIterator}" >

    < af:panelBox text = ' #{MASTER.» BmCode}"id ="pb1"type ="default ".

    ...

    < af:iterator id = "iter2' var = 'DETAIL' varStatus ="n ".

    value = "#{MASTER.» DETAILVIEW}.

    lines = ' #{bindings. " DETAILVIEW.rangeSize} ">"

    < af:commandButton id = "cbWaPos" blocking = 'true '.

    ...

    < / af:commandButton >

    < / af:iterator >

    < / af:panelBox >

    < / af:iterator >


    It works fine until we have a production order with more than 7 posts (10 posts is maximum).


    In the PageDef.xml the RangeSize of the master iterator is limited to 7 we use this application on a mobile device with a small touch screen.

    The RangeSize of the iterator of detail is limited to 10


    <!-maximum of 7 orders can be displayed on the screen of the Tablet - > 1024 x 600

    < iterator lie = "drmaMASTERVIEW."

    RangeSize = DataControl "7" = "ProductionDataCollectionAMDataControl."

    ID = "drmaMASTERVIEWIterator".

    ChangeEventPolicy = "ppr" / >

    < iterator lie = "drmaDETAILVIEW" RangeSize = "10".

    DataControl = "ProductionDataCollectionAMDataControl."

    ID = "drmaDETAILVIEWIterator".

    ChangeEventPolicy = "ppr" RowCountThreshold = "0" >


    My problem is:


    Although we have a RangeSize of 10 in the iterator of detail I get only 7 buttons even if the DETAILVIEW returns 10 rows. When I put the master RangeSize 8 I get 8 buttons in the iterator of detail but my panelBoxes leave the screen on the right side.


    someone at - it an idea to solve this problem? I use JDeveloper 11.1.1.6.


    Thank you

    Christoph



    Hello

    I suggest your iterator links RangeSize = 25 for example and adding the logic in the rows of af property: Iterator directly.

    for example

    Try and let us know the result.

    Concerning

  • Get NPES trying to create a line of the iterator of table on the loading of the page.


    Hi all

    I'm new to ADF and try to learn from its concepts. I've created a workflow with the train and using 7 jspx pages as the train stops. When I move from one stop to the next stop, the data are made to the database.

    My use case is, I want to fill an iterator of table on the loading of the page based on the data provided on the previous stop.

    I tried to use the code to find the iterator and create the line the view object in support Builder bean as well as file impl application module(call the executable action method) but every time I got the same null pointer exception.

    The code used for creating line iterator:

    BindingContext bindingContext = BindingContext.getCurrent ();
    BindingContainer DCBindingContainer = (DCBindingContainer) bindingContext.getCurrentBindingsEntry ();
    IdIterator DCIteratorBinding = bindingContainer.findIteratorBinding("iteratorName");

    ViewObject vo = idIterator.getViewObject ();

    Line rw = vo.createRow (); It is the line where I'm getting null pointer exception.

    Trace of the exception:

    at oracle.adf.model.bean.DCDataVO.initFKs(DCDataVO.java:621)

    at oracle.adf.model.bean.DCDataVO.createInstance(DCDataVO.java:592)

    at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1993)

    at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2492)

    at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2533)

    at oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:2514)

    at oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:11079)

    Please correct me if I'm wrong, but that's what I think I understand that, iterator links are not initialized correctly on appeal by Builder or application module impl of the file that I use.

    I will need to create a listener of phase of page for the task flow and and use the method afterPhase to call my method for line creation and insertion in the table iterator. ?

    But this approach causes the phase listner class to call for each workflow page I don't want I need to fill out the table only for a single page and not to other pages of six.

    Please help me in this problem by providing suggestions and pointers.

    My version of JDev is 11.1.1.6.

    Thanks in advance.

    ~ Abhishek

    Hi Ben,

    Thanks for your reply. But it did not solve my problem.

    To solve my problem, what I did is mentioned below:

    In my support for this page two, I create a listner beforePhase method and named her beforePhase displaying page jspx tag property.

    when the phaseId is RENDER_RESPONSE, so I call my method to set the extracted database of the values in the table iterator. and it updated the iterator with new values.

    Thank you all for your answers.

  • Problem with the partialTrigger on the Table of the ADF

    JDeveloper Version 11.1.2.3.0

    I've reproduced the problem with partialTrigger on the array element. Sample application can be downloaded from here . He needs to run HR schema.
    Underneath the pageFragment sample, I can try refreshing adf table in two ways
    1. turn the addEmployee button id in partialTrigger of the ADFTable component.
    2. set the id of the button addEmployee in the PanelBox component partialTrigger.

    Note the difference - 1st only works no where as 2nd works very well. Do you have additional constraints when updating using the ADF Board
    partialTrigger?
    I have reproduced the usecase in example below:

    Structure of the PageFragment-

    PanelBox
    |
    | _ ADF Table
    |
    | facet __toolbar
    |
    | _ addEmployee button


    Code PageFragment

    < af:panelBox text = "PanelBox2" id = "pb1" >
    < f: facet name = "toolbar" >
    < af:commandButton actionListener = "#{bindings.addEmployee.execute}" = "addEmployee2" text "
    Disabled = "#{!}" Bindings.addEmployee.Enabled}"id ="cb1"partialSubmit ="true"/ >
    < / f: facet >
    < af:table value = "#{bindings." Var EmployeesView1.collectionModel}"="row"rows =" #{bindings. " EmployeesView1.rangeSize}.
    emptyText = "#{bindings." EmployeesView1.viewable? "{'No data to display.': 'Access Denied.'}".
    fetchSize = "#{bindings." EmployeesView1.rangeSize}' rowBandingInterval = '0 '.
    selectedRowKeys = ' #{bindings. " EmployeesView1.collectionModel.selectedRow}.
    selectionListener = "#{bindings." RowSelection EmployeesView1.collectionModel.makeCurrent}"="single"id ="t1 ".
    "displayRow ="selected"partialTriggers =": cb1 "styleClass ="AFStretchWidth">
    < af:column sortProperty = "#{bindings." EmployeesView1.hints.EmployeeId.name}"sortable ="false ".
    headerText = "#{bindings." EmployeesView1.hints.EmployeeId.label}"id ="c1">
    < af:inputText value = "#{row.bindings.EmployeeId.inputValue} '"
    label = "#{bindings." EmployeesView1.hints.EmployeeId.label}.
    required = "#{bindings." EmployeesView1.hints.EmployeeId.mandatory}.
    columns = "#{bindings." EmployeesView1.hints.EmployeeId.displayWidth}.
    maximumLength = "#{bindings." EmployeesView1.hints.EmployeeId.precision}.
    shortDesc = "#{bindings." EmployeesView1.hints.EmployeeId.tooltip}"id ="it1">
    < f: validator binding="#{row.bindings.EmployeeId.validator}"/ >
    < af:convertNumber groupingUsed = 'false' pattern = ' #{bindings. " EmployeesView1.hints.EmployeeId.format}"/ >
    < / af:inputText >
    < / af:column >
    < af:column sortProperty = "#{bindings." EmployeesView1.hints.FirstName.name}"sortable ="false ".
    headerText = "#{bindings." EmployeesView1.hints.FirstName.label}"id ="c2">
    < af:inputText value = "#{row.bindings.FirstName.inputValue} '"
    label = "#{bindings." EmployeesView1.hints.FirstName.label}.
    required = "#{bindings." EmployeesView1.hints.FirstName.mandatory}.
    columns = "#{bindings." EmployeesView1.hints.FirstName.displayWidth}.
    maximumLength = "#{bindings." EmployeesView1.hints.FirstName.precision}.
    shortDesc = "#{bindings." EmployeesView1.hints.FirstName.tooltip}"id ="it2">
    < f: validator binding="#{row.bindings.FirstName.validator}"/ >
    < / af:inputText >
    < / af:column >
    < af:column sortProperty = "#{bindings." EmployeesView1.hints.LastName.name}"sortable ="false ".
    headerText = "#{bindings." EmployeesView1.hints.LastName.label}"id = 'c3' >
    < af:inputText value = "#{row.bindings.LastName.inputValue} '"
    label = "#{bindings." EmployeesView1.hints.LastName.label}.
    required = "#{bindings." EmployeesView1.hints.LastName.mandatory}.
    columns = "#{bindings." EmployeesView1.hints.LastName.displayWidth}.
    maximumLength = "#{bindings." EmployeesView1.hints.LastName.precision}.
    shortDesc = "#{bindings." EmployeesView1.hints.LastName.tooltip}"id ="it3">
    < f: validator binding="#{row.bindings.LastName.validator}"/ >
    < / af:inputText >
    < / af:column >
    < af:column sortProperty = "#{bindings." EmployeesView1.hints.DepartmentId.name}"sortable ="false ".
    headerText = "#{bindings." EmployeesView1.hints.DepartmentId.label}"id ="c11">
    "< af:selectOneChoice value =" #{row.bindings.DepartmentId.inputValue} "label =" #{row.bindings.DepartmentId.label} ".
    required = "#{bindings." EmployeesView1.hints.DepartmentId.mandatory}.
    shortDesc = "#{bindings." EmployeesView1.hints.DepartmentId.tooltip}"id ="soc1">
    < f: selectItems value = "#{row.bindings.DepartmentId.items}" id = "si1" / > "
    < / af:selectOneChoice >
    < / af:column >
    < / af:table >
    < / af:panelBox >


    Thank you
    Rajdeep

    Hello

    the reason in my opinion, this has to do with the creation of the employee, who sits on the company and not the iterator that displays the data in the table. Therefore, the iterator must re - query to view the data that you created in silent mode in the background

    Addition of

    employeesViewImpl.executeQuery ();

    to your AppModule Impl class at the end of the creation of the employee solve the problem that you see

    Frank

  • How to assess the sharpness of the development of the RAW files?

    What is the best technique to sort any RAW files for the sharpness of focus?  I am a photographer of nature (birds, insects, flowers, whales and landscapes) taking pictures with the Canon 20 d and the telephoto & macro Canon L series lenses.  My current technique is to sort for incredible sharpness by displaying the 1:1 and in rejecting the RAW file, if it is not strong (eg. eye of the animal that is my update).  I reject some beautiful photos which do not appear to be strong right out of the camera (in view of 1:1)?  Thank you for sharing your techniques to assess the sharpness of focus!

    Emphasis sharpeness, created by the lens being exactly with the emphasis on the plain you intended is a different thing to appied to image sharpening in the treatment, which is the localized basically contrast enhancement. The sharpness of the current focus point is a factor of the quality of the lens (combined with your technique by getting in the right place and avoid the camera of course), if the technique is correct, using L series camera lenses should create a very sharp activity to any opening, the poorest quality lenses (and or even the occasional goal of L are never totally strong as never actually are in implementing to the point and by increasing some sensors to solve even the best lenses that can result in images to look soft on these cameras as the 1 D III mk if emphasis is placed on the edges of the sensor) RAW files imported into LR have applied by default sharpness to deal with a specific problem described as follows. Capture digital sensors usually have an anti-aliasing filter in front of the sensor that helps eliminate the moiré artifacts like edges come in conjunction with the resolution of the photosite array. It's a complicated way of saying that if you have a thin straight line and you turn on the sensor so that it is almost aligned on a line of photosites, there will come a point where the slim straight fit random one side or the other of a border between photo sites. Anti aliasing blur filter and extended the line to minimize the moiré effect that this causes. To do this, a resolution is lost.  Sharpening of entry is the operation of border adjustment limit contrasts to retrieve the perception of resolution to reduce this problem, this will allow you to judge whether you have actually touched in the right place with your accent, by displaying the image 1:1 before you start adding improvements in contrast. Sharpening of entry is applied by default (unless disable you it in LR) and little or no extra is usually required. Output sharpening is required for images, print and web, and this is also done automatically by LR using selections in the export mode.

    Creative sharpening can be done if you really want to using the tool brush in LR, but applying on sharpening all as a creative technique using LR (or any other software besides) should be done with caution, or not at all.

    Sharpening treatment promotes an image, it does not have an image update somehow in brief output.

  • Bind variable: always related to the current attribute of the iterator line

    Hi, OTN,.
    Need some help with the variable binding query of the view object.

    I have a VO1 with: PARAM in a subquery in the WHERE clause.
    This: PARAM must always be equal to the current attribute of the iterator of VO2 line.

    VO1 and VO2 are not related, but their of1 and EO2 entities has an association.

    VO2 is exposed as an array on my page, so I did it with the table selection listener.
    He calls makeCurrent parameter named where clause param for VO1 and VO2.

    This method works, but the problem is selection listener is called only when a table row is explicitly selected.
    The current row of the iterator can be changed whithout table selection, such as sorting or the parent navigation of VO...

    Is there a world better, maybe a declarative method for this problem?
    Thank you.

    Example query VO1:
    SELECT ... FROM EO1
    WHERE ID != (SELECT ID FROM ... WHERE attr = :PARAM)
    JDeveloper 11.1.1.3, AD, BC

    I guess you try relationship master / detail (Table-based form)... you must see link
    Refer to this:
    http://download.Oracle.com/docs/CD/E14571_01/Web.1111/b31974/web_masterdetail.htm#ADFFD761
    Chapter 24 - master data display / detail

    Amit

Maybe you are looking for

  • internet connection Wi - Fi suddenly waste

    I am with AOL, we used to have very fast internet speeds with our netgear wireless modem, but now the internet has gone garbage signal is "very low", but I don't know why this is? nothing has changed? and all the other gadgets that uses that the inte

  • No sound on the computer and not getting the error "no available active mixer devices".

    Original title: sound problems Hi, my name is JF. I'm having the VERY SAME problem. A few weeks all of a sudden all I hear is silence. NO SOUND!  I bought new speakers and nothing.  He said: no available active mixer device.  I have a Dell Optiplex G

  • downgrade from version

    I have a sandisk sansa fuze v02.03.33 and want to downgrade or less v02.02.26. is this possible? and I may have a link. and if not, why?

  • my wireless mouse

    I put in the connector - the software for the device indicates loaded - mouse does not work.  now what?

  • Eception exception: Index 0 &gt; = 0 at the start of the application to the top

    Hi all I had a java application for blackberry work.  Only, I changed the package names and recompiled it again. There are no errors, but when I deploy him on my device (8320) and try it on the Simulator, it just gives ' Eception exception: Index 0 >