problem at startup

Similar Questions

• Satellite A300-1 b 9 and WXP - cable sound problem at startup

  I desided to "downgrade" from Windows Vista to WXP Pro sindows.
  So, I installed WXP and everything, updated and everything!
  * http://img141.imageshack.us/img141/6448/47371216zy9.jpg

  But I had a wired audio problem at startup:
  "Cannot not be able to control the Volume.
  I downloaded a driver called:
  driver audio Realtek High definition
  I still don't have the same "error" starting :/

  I tried several different audio driver, but I still get the message!
  and what ever I don't... I get this noise... When you boot a computer and then push a lot of buttons...
  a noise comes loke "OOOT" :/
  boring terrifingly.

  Please, anyhelp would be much appreciated.

  Thanks for the comments!

• I'm alert saying 'there is problem at startup msijmm32.dll' every time I restart my computer.

  Dear team,

  I'm alert saying ' there is problem at startup msijmm32.dll' every time I restart my computer.
  Please suggest to solve the same.

  Thank you

  Hello

  1. are you able to start your computer successfully?

  2. what was the recent change in hardware or software performed on the computer before the question?

  If you receive an error for "msijmm32.dll", it's a Trojan infection masquerading as a system file.

  If you receive an error message about 'msimg32.dll' is a correspondent for desktop applications and transparent bits in Windows system file.

  Please follow the links below to hep the problem.

  Method 1

  If you are able to boot to your desktop, please run a virus scan that the file 'msijmm32.dll' is a known infection.

  Please scan the computer for infections by using the links below.

  Reference link:- http://www.microsoft.com/security/pc-security/default.aspx#Safety-products-and-scans

  Microsoft antivirus software: -.

  http://www.Microsoft.com/security/PC-security/malware.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2

  If you are not able to boot to the desktop normally, and then start your computer in safe mode with network and follow method 1

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Only internet wired connection will work in safe mode with network, if there must be procedures for troubleshooting which requires the content of the internet, then please download the content in normal mode and pass t safe mode, in the case of a wired connection, please connect a cable directly.

  Method 3

  If you are facing the error for the dll file msimg32.dll, try re-record it manually in safe mode or in normal mode.

  a. click on start
  b. type term (right click and run as administrator)
  c. type regsvr32 msimg32.dll and press enter

  Also run a scan of system files Checker

  Run a System File Checker tool

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Problems during startup and disc.sys blue screen

  I got hard to start that a 32-bit Vista computer does not move in front of the black screen, sometimes there is a blinking underscore, or the mobile mouse pointer. Usually I restart with ctrl-alt-del and it works, it takes sometimes a few tries.

  It also seems to start normally when I go out in the inside installation disc, when he's not here it hangs in checking dmi pool Data given, when he asked me to "press any key" If there is a disc inside.

  This happens only when the CD player is first in the boot order, so I change to hard first push which does not start again.

  If someone has encountered this?

  If I get to the connection, everything works very well afterwards.

  I was going to repair the installation disc, but it's moving before the Microsoft corporation at startup loading bar.

  Then, I got a blue screen PAGE_FAULT_IN_NON_PAGED_AREA with Codes and * disk.sys with address

  I tried CHKDSK and last good known Configuration, but nothing helped.

  In addition, it was after I reinstalled from the cd of installation about five days ago everything worked as well the first two days... the only problems I had were with the installation of updates, after I finally installed successfully, it's when, startup problems began.

  Any experience or advice appreciated!

  JMP

  You have two questions.

  1 - associated WRkrn.sys Webroot for Webroot SecureAnywhere I would remove it

  2-drive hardware problem.

  I remove Webroot and go the HD manufacturer download their utility check HD and run it.

  

• Problem at startup with Vista - hang at crcdisk.sys - green bar still there

  Hello

  I have a big problem and I'm not able to find a problem.

  My laptop (Lifebook, Fujitsu A6200) always hang at startup when the green bar with the windows logo is moving (I restarted after 3 hours).

  When I starts in Mode safe, it hangs on CRCDISK. SYS. I left it run for 2 hours and it restarted somewhere in this period.

  I tried the Drivers and applications of restore disc that came with my laptop and it never found problems. I ran the startup of more than 8 hours repair and the balance sheet was not finished.

  I plugged my hard drive on another PC so I can access my data correctly, it is not a hard drive problem.

  I have not installed any application or any new hardware in the weeks before the problem appeared with the exception of the automatic updates of Windows. I don't think that the problem is a hardware problem.

  If possible, I don't want to reinstall windows.

  Thanks for your help!

  Chris

  Hi Chris,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Use system recovery tools to fix the problem, to access system recovery tools. To do this, follow the steps mentioned in the link below:

  How to access the System Recovery Options menu?

  See also the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  (a) System Restore: put the computer to an earlier point in time when the computer was working fine.

  (b) order to access Windows Recovery: run the disk check to repair bad sectors on the hard disk.

  At the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk /r , and then press ENTER.

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  (c) run the Windows Memory Diagnostic tool

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIG problem - the startup information is missing

  Hi, I tried to install windows vista on my computer and I don't have time. Currently, my C drive is fully formatted, I have no OS and cannot start all discs, I get bootmgr is missing error.

  By pressing F2, F11 or F8 does not work because I still got the message "bootmgr is missing".

  Is it possible to get at least the computer so I can try to fix it?

  ·       Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like:http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps: (you need an Installation of Vista disc to do that)

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then clickNext.

  4. click onrepair your computer.

  5. click on the operating system that you want to repair, and then clickNext.

  6. in theSystem Recovery Options dialog box, click command prompt.

  7 TypeBootrec.exe and press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·       bcdedit/export C:\BCD_Backup

  ·       c:

  ·       Boot CD

  ·       BCD attrib s h - r

  ·       Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If you do not have the disk, try EasyBCDhttp://neosmart.net/dl.php?id=1 and see if that helps the problem.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem at startup error: [.] ShellClassInfo] LocalizedResourceName=@%Systemroot%system32 shell32.dll - 21787

  Original title: problem when starting

  Hello. Whenever I connect to my laptop, a notebook always appear in the office showing a message-

  [. ShellClassInfo]

  Shell32.dll LocalizedResourceName=@%Systemroot%system32-21787

  What does that mean? I'll do my laptop freeze. I can not even access the Task Manager by pressing Ctrl + Alt + Delete.

  I restart the laptop but the message still appears, and then it will freeze again. I can't use my laptop because it's only 3 - months old.

  Someone can help me. Please, I beg you. Surely, I'd appreciate any help. Thank you.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This problem may occur if the following conditions are met:

  • A Desktop.ini file exists in one or more of the following folders, where drive is the drive on which Windows is installed:
    • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
    • drive: \Documents and Settings\All Users\Menu run\programs
    • drive: \Documents and Settings\All Users Menu

  Method 1: Delete the Desktop.ini file

  1. Start Windows Explorer.
  2. On the Tools menu, click Folder Options, and then click the view tab.
  3. In the area of Advanced settings , click on to disable the Hide extensions for known file types check box and the check box that Hide protected operating system files (if they are not already turned off), and then click OK.
  4. Delete all occurrences of the Desktop.ini file that contains the lines described earlier in the "Symptoms" section of this article. To do:
     • Locate each of the following folders, right-click the Desktop.ini file, (if the file exists in that folder), and then click Open:
       • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
       • drive: \Documents and Settings\All Users\Menu run\programs
       • drive: \Documents and Settings\All Users Menu

       where drive is the drive on which Windows is installed.

     • Verify that the file contains the following lines:

       [.ShellClassInfo]
       LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
       

       If the file contains these lines, right-click the file, click Removeand then click Yes when you are prompted to confirm the deletion.

  5. Restart your computer and verify that the problem is resolved.

  Method 2: Use the (Msconfig.exe) System Configuration utility to disable the startup item

  1. Press Windows + R keyboard a type of execution.
  2. In the Open box, type msconfig, and click OK.
  3. Click the Startup tab.
  4. Clear the check box next to any Office entered into the column of the startup item that are referred to as common startup in the location column and can be found in one of the following locations (as indicated in the command column):
     • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
     • drive: \Documents and Settings\All Users\Menu run\programs
     • drive: \Documents and Settings\All Users Menu
  5. Click OK to quit the System Configuration utility.
  6. Restart your computer and verify that the problem is resolved.

  Method 3: run Microsoft safety scanner

  I suggest you to run the Microsoft safety scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  ________________

  Thank you best regards &,.

  Isha Soni

• Re: Satellite L655 - very strange problem at startup

  Hello

  A problem with my Toshiba Satellite L655 of weirdo. Basically I even don't know how to explain it exactly.
  I write what actually happens...
  Almost any time when I turn on my computer by pressing the turning button as the computer begins to run and download, but all of a sudden after 7-8 seconds it crashes.
  I mean the computer is down and off. In addition, once he arrives there is little "BOOM" strange noise coming from the inside of the laptop.
  I don't know if the power supply (power cable) is related because it comes up with the cable connected and without.

  My laptop running Windows 7.
  I'm afraid that it didn't get injured because too many times, it crashes. I can't work with him:.
  I need this computer to be very good for my studies.
  I want to mention that I have keep the computer very well and performs updates.

  Please if you have any suggestions what can I do...

  Hello

  You know that on this virtual path, it is not easy to say why this is happening. Please test as follows:
  -start the laptop computer and enter the BIOS settings, leave it for a while and watch carefully what will happen
  -If nothing happens by default the BIOS settings and restart the notebook
  -after reboot, press F8 and try to start Notepad in safe mode.

  Thanks for posting comments

• SQL Server problem at startup - States of error SQLEVN70. RLL corrupt... How do I uninstall this driver & run Setup again?

  This error appears only in the beginning upward... I can clear the error by pressing close. It does not seem to cause any problems with any of my applications, but it is annoying when I turn on my computer and this error message. Your help would be appreciated if someone can give me the steps to correct this.

  Hello

  The problem is with SQL server, I suggest you to send your request from the link and check.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• problem at startup of the laptop

  Whenever I have my first computer statr, it seems that it starts normally, but just after the hp logo a blue screen appears a TI said: "there is a problem n restart again" and just below another line says that System_error_exception... After this restart the computer laptop again n this time it stars normally and don't suffer no screen problem , but shortly after I knew low n start again he repeats the procedure, please tell me what I'm doing?

  Hi @Abhinav_Vishen

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that at the start, you receive a System_error _exception and the computer restarts then boots into Windows and works fine until you stop and restart date which he repeats the question.

  First of all, I ran the HP Support Assistant to search for updates.

  I'll try also test for problem of memory. HP Notebook PC - hardware failures (Windows 8) screening

  (), It will be under the components section)

  You can also check for compatibility issues. See what works  (from windows .com)

  Then, I would try a HP PC - refresh your PC to solve problems (Windows 8)

  Good luck!

• Problem at startup of field step installation Peopletool 8.50

  Hello
  I install Peopletool 8.50 on my pc.
  Before the creation of the field everything went well.
  Instance name: PSP1
  I chose that domain name.
  
  Next, I created the domain with the following options:
  
  
  ----------------------------------------------
  Fast configuration menu - field: PSP1
  ----------------------------------------------
  Characteristic parameters
  ========== ==========
  Servers of pub/Sub 1): n ° 15) DBNAME: [PSP1]
  (Server 2) Quick: No. 16) DBTYPE: [ORACLE]
  (Query servers 3): No. 17) user name: [sysadm]
  ((4) shock: Yes 18) UserPswd: [sysadm]
  ((5) Jolt relay: No. 19) Networkid: [TESTSERV]
  ((6) WSL: No. 20) AddToPATH: [D:\app\Lenovo\product\11.2.0\dbh
  ome_1\BIN]
  (Debugger 7) PC: Yes 21) ConnectID: [people]
  (Event notification 8): Yes 22) ConnectPswd: [peop1e]
  [(Serveurs de 9) MCF: No. 23) name of the server:]
  (10 assembler) Perf: No. 24) Port of WSL: [7000]
  ((11) Analytics servers: Yes 25) JSL Port: [9000]
  (Bridge 12) areas: No. 26) Port of JRAD: [9100]
  
  
  Now when I started (series) this area I found the following error.
  
  PSADMIN.5620 (0) [02/04/13 19:19:11] (0) attempt to Begin priming on domain PSP1
  PSAPPSRV.3344 (0) [02/04/13 19:19:26] (0) early version 8.50 PeopleTools (WinX86)
  ING. Tuxedo server is APPSRV 99/2
  PSAPPSRV.3344 (0) [02/04/13 19:19:26] (0) used Cache Directory: C:\Users\Le
  novo\psft\pt\8.50\appserv\PSP1\CACHE\PSAPPSRV_2\
  PSAPPSRV.3344 (0) [02/04/13 19:19:28] (1) GenMessageBox (0, 0, M): the database access code
  : Invalid user or password database signon ID. (id = sysadm)
  PSAPPSRV.3344 (0) [19: 19:28] (0) 02/04/13 server could not start
  PSADMIN.5620 (0) [02/04/13 19:19:34] (0) attempt to end PSP1 field boot
  
  
  But I can connect in PSP1 with sqlplus sysadm.
  Can someone please help me with this problem?
  
  Thank you!

  You try to start the field with the database owner who is an Oracle account. You must provide a PeopleSoft (items 18 and 19) account, which has sufficient permissions to start the application (PS for example) server.

• Problem of startup and shutdown classes

  Hello
  
  I'm starting a demon when starting the server.
  
  I have defined start and stop classes and deployed the .jar as a shared library (from JDeveloper)
  
  But when he starts throws ClassNotFoundException.
  
  What else is missing?
  
  I am using weblogic 10.3.
  
  Thanks in advance

  There are various options available as the...

  Option-1). Make a pot of your startup and shutdown classes and then put them in the \lib

  Or

  Option-2). you will find in your servers as 'startWebLogic.cmd' or 'startWebLogic.sh"variable Classpath StartScript... you can add it

  Example: part of above Script code

  Set DOMAIN_HOME = C:\bea103\user_projects\domains\7001_Domain
  for %% in ('DOMAIN_HOME %'), set DOMAIN_HOME = %% ~ fsi
  Call "% DOMAIN_HOME%\bin\setDomainEnv.cmd" % *.
  Set JAVA_HOME = c:\bea103\jrockit_160_05
  Set SAVE_JAVA_OPTIONS = % JAVA_OPTIONS
  Set SAVE_CLASSPATH = % CLASSPATH; C:\MyJars\myStartupAndShutDown.jar;
  
  
  Or
  
  Option-3). in "setDomainEnv.sh"(UnixBased OS) or "setDomainEnv.cmd' (WINDOWS)".

  the PRE_CLASSPATH=C:\MyJars\myStartupAndShutDown.jar value;

  .
  .
  Thank you
  Jay SenSharma
  http://jaysensharma.WordPress.com (WebLogic wonders are here)

• HP mini 1000 PC: will of problem at startup password

  I forgot my password. When I turn on it says enter enter current password, I entered what I thought was my password 3 times and in the end it says the password verification failure fatal system error stopped cnu9142q9h. Help, please

  Hello:

  See if this incoming unlock access code allows you to...

  e9lo3v75oz

• ComboFix problem preventing Startup Windows 7

  Recently, I had a virus and was instructed to use ComboFix on my under Windows 7 Home Premium HP p6310f. ComboFix messed up Windows somehow to keep it from start (based on what I've seen of a few searches on Google). I want to know is on the HP system recovery tools. Unfortunately, I was not smart enough to think to create restore points and I have to return a Windows install disk to use the recovery console or tool from HP on the score of "Factory Image. Will be the option that restores the disk hard it's "original settings" tool to do what I hope it does and put a clean Windows install on, or it will simply wipe the drive?

  Thank you!

  You have all you need to backup files?

  So I read this article on how to save, once this is done, I would like to do a full restore of the HP.

• Problem at startup of lightroom 4.3

  I bought Lightroom 4.3, I installed it on the computer and at time of launch I got a message telling me that the application cannot be launched because MSVCR100.dll is missing. I do a search in the computer and I find quite a file of this name attached to firefox, kapersky, etc... Comment do make this integrated file 4 of Lightroom.

  Thanking you

  Manually install the MSVC 2010 runtime by downloading from Microsoft.

  Mylenium