Problem: Burning CDs with Windows Media Player

Similar Questions

• Can't burn CDs with Windows Media Player

  Hello

  I have problems with CD burning on my computer satellite phone. Had the laptop for a few months and have had no problems. However only found an extra software with the DVD drivers CD so downloaded it - big mistake!

  I had to restore in settings a few weeks that I could not delete the programs. That s all is well now, but since I was unable to burn CDs in Windows Media Player. I click on "burn" and nothing happens, and the right side says CD has nothing on the subject (it s a blank CD).
  All tried and checked my settings, etc, can't think of what it could be.

  Does anyone have any suggestions? I would be grateful for any help.
  Thank you

  Hello

  I guess that's because other applications have disabled the function of registration of Windows operating system.
  Go into the my computer and right click on the CD/DVD drive. Here, please select the properties.
  Click the recording tab and enable the option enable the writing of CD on this drive

• Burning CDs with Windows Media Player in Windows 7. "Error: connect a burner and restart the player.

  Original title: CD burning with Windows Media Player in Windows 7

  When I try to burn an audio CD with Windows Media Player, I get the message "connect a burner and restart the player.

  I am able to burn audio CDs using ITunes, so I don't think that my CD/DVD burner is defective.

  Thanks for your help.  The "fix it" has not worked, but I checked the settings of my Nero 8, Nero Toolkit, Nero Burn Rights program, and he was the one who said "everyone has burn rights" or "nobody burn rights.  When I changed the option to "everyone", everything started to work properly.

• Impossible to burn CDs with Windows Media Player

  Media Player

  I can burn CDs, it will say that I have the cd durty or I donth have my burner workin but I can burn in media center always shows that I have the full cd when is a new thank you

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a CD or DVD in Windows Media Center

  You can burn different types of CDs and DVDs in Windows Media Center. This allows you to decide what type of DVD or CD you want to create, based on the way and you want to use to read the content after it is burned to a disc.

  And read the links there, too.

  See you soon.

  Mick Murphy - Microsoft partner

• Too high bass after burning CDs with Windows Media Player 12

  When burning the CD on WMP the bass is medium to high.  I noticed happens that on some CD burning, but the amplification of the bass is very noticeable.  Even if I turn down the bass on my player it still sounds weird.  There is a sort of change in equalization going on during the burning process.  When this happens on a CD, it affects ALL the songs on it. Then I will burn another mix CD and the same exact song will not have the bass amplification.  Is it possible to prevent this?  It might have something to do with the characteristic sound of leveling?  Or maybe the burning speed?

  I record on CD - R discs.  It does not do anything on MP3 or Audio on the disc, just CD - R.  I noticed this on my car player CD system.

  Audio/mp3 is how to actually burn the disc... Audio discs are similar to a cd... upto 80 minutes in length classical music, but many modern readers will also play cds that have MP3s on them.

  If you want to re - rip to wma lossless format just make sure that you copy protect them. (under settings "rip music" in the options of wmp)... come back to me, if you need more advice. Best - R.

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Not possible to burn music with Windows Media Player

  When I drag music from MP3 Rocket files to burn the pane in windows media player, they will not 'stick' nor will they stick to the music library... althoguh I did it before in the two front wings, why not more?

  OT: drag & drop

  Hello

  I suggest you try the steps from the following link to burn CD/DVD with Windows Media Player.

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  Additional information:
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If the problem is only with MP3 rocket software, then I suggest you to contact the support of the rocket.

• text to burn cds on windows media player

  I would like to know if it is possible to add text (the album title, artist name, song title) in the CDs that I burn on Windows Media Player.

  Hi FreddieHayes,

  Windows Media Player does not burn audio CD, CD text, and it doesn't have the plug-ins Windows Media Player from Microsoft which will be added to this support.  There are many applications that make the third party CD burning. Moreover, if the CD supports playback of WMA or MP3, you can use Windows Media Player to burn your CD with more songs by CD and all track information.

  However, there are third-party applications that will enable this feature. You can check on the internet for plugins like these.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also check the links:

  Add items to the Windows Media Player library

  Add or edit media information in Windows Media Player

  Add or change album art in Windows Media Player

  Hope this information is useful.

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Language problems, burning discs of windows media player

  For the past few weeks what I burn on the media player comes with Chinese writing, even if they are purchased in England in HMV best standard. Why this is happening and how can I change it? Yesterday I also completely restarted the computer laptop back to factory settings, and it's ALWAYS the same... Thank you.

  Hello

  Method 1:

  I suggest you to return the item and check if it helps:

  Troubleshoot-problems-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Method 2:

  See the article and try to change the region settings and check if it works:

  Change the country or region setting

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-country-or-region-setting

• When I RIP and burn music with windows media player the disc will only playback on computer

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  ==================================================
  The .wpl files are probably Windows Media Playlist files... not real music files.

  Here is some info on the .wpl files:

  WPL file extension
  http://www.downloadatoz.com/file-extensions/wpl-file-extension.html

  File extensions on the Audio CD (music) that will play in a CD player must be CDA.

  The following link might be worth a visit:

  Windows Media Player 11
  for Windows XP
  Burn your own custom CDs
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/burn.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Impossible to burn CDs in Windows Media Player 7

  I can not burn CD more. It just stopped burning. Some of the music I want to burn also has a red x on it. I don't know what is happening.

  I just stopped and bought Memorex CD - R and it started working. Maybe he just will not take Maxell more. That's what I had always used. Maybe this will help. Thanks for the reply.

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• Windows 8 - can't burn the disc with Windows Media Player after you refresh the PC as well.

  Original title: cannot burn, was ok and then nothing, has had this problem for a week now, redrawn, changed registry, tried everything?

  Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi, Dorian,

  Thanks again for your response. Really, I apologize for the inconvenience caused to you.

  You can try these methods to solve the problem.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) press Windows key + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  If the problem persists, use method 2.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

  Thank you