problem chart iMac

Similar Questions

• problem chart iMac (21.5 mi 2011)

  Hello

  I have iMac 21.5 (2.7 I5, AMD 6770 M mid 2011) I have no problem for 5 years, but couple days ago something appears on the screen. And I would like to know what it is?

  and how to solve a problem.

  

  

  It seems that your GPU is a failure. You must make an appointment and bring it to your Apple Store Genius Bar for a diagnosis and an estimate of the repair.

• More old problem of Imac

  Recently, my Imac (2008) older would not start.  He didn't have me given all the problems for 8 years until this point.  When I hit the Start button, the apple logo would come to the top, no startup sound was made, and the computer would not clear the checkpoint and go to the office/opening computer screen.

  I have tried several things and finally managed to do start pressing keys - 'control', 'option', 'P' and 'R '.

  I have a backup drive, with carbon copy clone.  When the Imac has finally started up, he started a leopard instead of the Mountain Lion that I usually use.

  Two questions: what caused this problem? How to return to the Cougar?

  Try rebooting into the recovery Partition by pressing command + R to start. Open utility disk and depending on the version of OS X installed race a repair disk 2 or 3 times or first aid on the hard drive. If errors appear after 2-3 attempts, which confirms the HD has failed and must be replaced.

  If the computer does not start in PR, which also confirms a hardware problem. Given the age of the computer, it may be best to simply replace it.

• problem chart xy to repeat the same plots

  Hello. I have this problem of graph plots in my graph XY.

  At first I thought it was just a line between the first and the last point. But it may also be because the graph is Replot my points over and over again. I feel that after my last point, the chart goes back to trace my first point is why its all joined in a single loop.

  Can someone advise me on this? I want just a line that the ends do not respond.

  I ready everythong except displays well on the chart. Desperate! Thank you.

  Hi sneaker,

  This is the crux of feedback you were talking about?

  Yes, these are comment nodes. Context-sensitive help will also be their name in this way, when you mouse over them!

  What do you mean by reprogramming my knots of comments? IM afraid I do not understand.

  The help of LabVIEW explains, how to initialize feedback nodes (and shift registers, which are essentially the same). Have you read the help?

• Problems with iMac 24 "2008

  I am totally beside me how to fix my computer. Here's the story.

  A year or so, my computer has stopped starting upwards. I blamed it on my husband for the recording of all its video games on my computer and I thought it kind of caught or something was wrong, but who knows.

  in any case, what started to happen was, I pushed the power button and the computer began to start. It rang, and then I saw the status bar, which seem to take forever. Before that the computer could not start completely, it stops. I tried to do this several times, but I could not start completely. I was able to boot into recovery mode. When I ran disk utility, it showed me that the hard drive has been locked. I tried several times to fix it, but it would allow me to fix it. Finally, I have advanced and erased the hard drive, because I had already photographed it. After it, I restored it back to the top, and it seemed to work fine.

  Two months later, he did exactly the same thing. I fought with him again and again, but it has gotten to the point where it would allow me to erase its content in more disk utility. I put the original installation disc into the computer and wipe it clean from the disc, there still, restore back up.

  Now, there it is again. My computer has taken over. I'm so frustrated that I had planned just to not restore backup from this time and just transfer necessary photos and documents from my above outside. I was unable to clean or repair in once again disk utility, so finally I put in the installation disk and it started from there, but then he would allow me to erase the hard drive from there. Somehow, I could finally do wiping of disk utility (after several attempts and patience).

  This time, after getting the hard drive erased, I went to reboot the computer and the computer booted to a full white screen. It wouldn't boot all the way and I couldn't even move my mouse. I forced the closing it down, started from the install disc and tried to install the software, but it would allow me to do. He told me that there is an error.

  I started in disk utility, even once, connected to the internet and tried to install the software from the internet... Looks like it would work perfectly, only he showed me waiting for the scheduled time was 22 minutes... and its been there for the past 12 hours, but no progress on the small bar thing. Absolutely no.

  I asked a couple of guys at work and they told me it looked like my hard drive has been corrupted. I was told I might need to buy a drive solid state internal entirely new and might solve my problem.

  I just wanted to see if anyone had similar problems or if he could tell me how to fix it myself.

  Thank you.

  Run the AHT directly from the CD provided initially w / your comp.: Apple Hardware Test

  

• Problem with iMac Start Up - file flashes and no sound

  Hello.

  I was using my iMac mid 2007 earlier today, when he started to slow down, with the color wheel appearing whenever I tried to click on something.

  I left only for a few seconds, thinking that he just needed some time, before the screen went all white. I turned off the computer in decision-making, tried to restart, but after several attempts to turn it back on, all I get is a white screen and a file flashing with an exclamation mark on the subject.

  I tried the cmd + R trick, but it does not work and there is also no startup sound, that is, or so I read, when you're supposed to press these keys.

  According to me, the iMac has been updated to OS X El Capitan (10.11), otherwise this was Yosemite, but I don't know what level of the update, I was on. I can't access the computer for you tell all the other details, but I'm sure he had a memory of 4 GB, I have improved the memory myself.

  Thanks for any help you can give me.

  The flashing? means that it cannot find your hard drive. Looks like your hard drive is faulty / failed.

• Driver problems chart satellite C50 - B - 14 d - plants vs Zombies game.

  Hello I wonder if you can help me. My son has a Toshiba Satellite laptop, C50 - B - 14 d 10 64-bit Windows. I am trying to run the plants vs Zombies 2 which he bought yesterday on the origin, but we get an error message "version of driver Intel 10.18.10.4276 17/08/2015-00:00:00." The recommended driver is xx.xx.154251 or later version "." I used the utility intel but it says that Toshiba have specific drivers so they can't install a new one. I have installed all updates of the Toshiba 10 driver, but it still does not work... I think that I need Intel Graphics Driver version 15.33.43.4425 but I can not install it unless I uninstall the graphics on Toshiba laptop, but I'm worried I'm going to ruin his laptop computer, any help? I'm at my end point now

  I have a similar problem, when the RAM is low, external monitor is turned off and main monitor shows BSOD...

  I added more ram, now I have 16 GB and it rarely happens (+ 3 GB swap file), also it is possible that the nvidia drivers were defective from November to March... It rarely happens, but it does not show BSOD...

  It's the last time I bought the toshiba laptop... they don't care of clients with old computers, when I bought this PC he had windows 8, I've updated to Windows 10 last year and since then to win 10 came out there is no intel new drivers of toshiba, so I'm their manual update of the website .zip files for intel. Drivers are updated but functions of the control panel doesn't work, for example to display energy saving - I disabled in many places but my main monitor again changes the brightness when there is a darker image on the screen...

  model: Satellite L50-A-19N

• Problem chart satellite A210-14 - 2 vertical and symmetric lines

  Hello

  I bought a Satellite A210-14 s ATI HD2600 1 last week, which, from the point of view of performance, convinces me really.
  Unfortunately, during this time, it happened twice, that * suddenly * got grainy and colours with increased contrast, including 2 symmetric and vertical lines of the same width (about 3cm).
  These lines also show the bottom, but with a different color.

  In addition, the horizontal view, some tasks began to Flash.
  The 2 times that has happened, the error seemed to have the same characteristics.
  In both cases, after a reboot, the symptoms of this family has disappeared.

  Attached some screenshots

  [http://img248.imageshack.us/img248/3609/bild054oj5.jpg | http://img248.imageshack.us/img248/3609/bild054oj5.jpg]

  [http://img339.imageshack.us/img339/3342/bild047qc9.jpg | http://img339.imageshack.us/img339/3342/bild047qc9.jpg]

  [http://img91.imageshack.us/img91/4706/bild046zx5.jpg | http://img91.imageshack.us/img91/4706/bild046zx5.jpg]

  Now the important question: is it a hardware failure (GPU, RAM or same TFT) or maybe it's a driver problem? (I use the dedicated Toshiba Ati driver)
  Would be important to know in a period of time, due to the money back guarantee option, I have in Germany (14 days)
  Thanks in advance for your help.

  Hello

  It is not easy to give accurate diagnosis but if possible, try to test it with external display. If the problem persists it is probably caused by a faulty graphics card. You can also use a supplied recovery media and install OS again to see if something is changed.

  Anyway, your Satellite of new notebook with valid warranty. I recommend you contact the nearest Toshiba authorized service partner and leave check your laptop.

  By the way: when you start your laptop have you noticed something strange when the Toshiba start screen happens?

• Storage problem new iMac?

  I read so many comments on the new iMac I'm highly confused.  It seems that the models GB VRAM 1 or 2 have Fusion Drive but a severely reduced 'normal' storage.   It also seems the VRAM is soldered in and cannot be increased.   Anyone know what I mean?

  VRAM was welded in iMac for quite awhile. I don't remember an iMac with replaceable VRAM.

  21.5 "models have welded in RAM which is not expandable. The 27 "a RAM slots and RAM can be improved.

  All standard configurations of the new iMac have 1 TB of hard drive storage space. You can customize some of them to use 256 or 512 FLASH Drive 1 to or merger of 2 TB drives.

  http://www.Apple.com/iMac/specs/

• Problem chart yoga 900

  Hello

  I met an annoying problem with my 900 of Yoga.

  the display is frequently glitching... or can say turning off & on less than a second.

  can anyone here help me how I can solve this problem?

  I tried to reinstall the graphics driver. but he said it's impossible! (downloaded the driver on the Lenovo support site).

  I should first of all uninstall my current driver?

  and is it the right solution?

  Thanks in advance

  Hello
  Thank you very much for your help.
  My OS is Windows 10 version home, 1511 (pre-installed on my laptop), and I had checked in the Device Manager, which showed that the driver is properly installed.

  I don't know what was the exact reason for the problem, but fortunately it has resolved after disabling some services in msconfig. in fact, I guess one of my BlackBerry services had caused the problem.

  Best regards

• Apple poster to problems on iMac

  I can't sign into my Apple ID on my iMac, although I can on my iPhone, iPad, MacBook Pro...  I can't connect to iTunes, iBooks or the App Store on my desk, and I can sign in iCloud in preferences, even if I CANNOT enter in iCloud via my web browser!

  I tried signing in using an external hard drive on the iMac with no joy...

  Help!

  Thank you

  WID

  What troubleshooting have you tried on the iMac as the reboot, SMC or PRAM reset etc...

• cursor problem chart xy

  Hello

  I have a weird problem with cursors on XY graph. I can't get the cursor and even when I put manually the value of X in the legend of the cursor, the cursor sometimes go to go to this value of X. And the question is very intermittent. The sliders sometimes operate without any problem and sometimes I can not enter and move them.

  I have attached the vi here that I'm having a problem with. Could someone take a look and let me know if you also have the same problem as me. See if you can move the sliders, snap the cursor on different plots and always able to move the sliders.

  Thank you

  LVCoder

  OK, I found the problem with the bizarre behavior of cursors. It is because of the free third sliders whose value is set by program. Because I set its value equal to the difference first 2 sliders, its value can be a higher value of the negative due to which the sliders do not behave properly.

  To solve the problem I am remove the third cursor and place 2 digital indicators on the front panel to show the delta between 2 sliders

• ProBook b 6560: driver problem chart probook 6560 b in windows 7

  Hello

  I had to reinstall it on a 64-bit windows 7 to new HARD drive.

  After restarting, I reinstalled it driver (Intel HD 3000) graphics card and got

  -freezing of the computer (doesn't mean no reaction from any act performed on keyboard)

  -completely corrupted display

  what I've done: restart in safe mode, uninstall the driver, reboot, reinstall: no chance

  I also tried with an external monitor (the driver with a second monitor connected): and it worked.

  I was thinking at that time that I'm safe, but not luck once again.

  -Restart without the second monitor ends the same

  -disconnect monitor when running ends corruption even display.

  I also try another setting in the driver intel (and other evsions) but no way so that it only works with the laptop monitor.

  I will also say that I took the chance on a linux dualboot and then it works out of the box.

  BIOS and other frivers are tha those newer HP's web site.

  Any good idea? It will be a pain to stay on a VGA driver...

  The best

  JM

  Hello

  Finally get it solved. It is the RAM.

  changed to another one of the ttesting and it goes without any problems.

  If this could be useful.

  BR

  JM

• Problem chart/getting updated when you press on the background thread notification dialog box

  I have a user who is graphical reports strange behviour after our request and only under the following condiitions alarms:

  1 sets of users clock back to trigger the alarm

  2 user locked the BB

  3. the user receives alarm 1 minute later

  4. the user unlocks the BB

  The strange behavior is that the background seems to resemble a back buffer bland with a rectangular hole where the notification dialog box should be.  The user clicks then the graphics and where the button should be back to normal.

  The question is not if the user does not lock the BB first - it's only under the condition of deadlock that the problem occurs.  The user statement also sometimes see a dialog "Please wait" when running our application after unlocking, but never when our application is stopped.

  Model is 8310 with 4.5 and approximately 3 MB of free space depending on the situation-> filefree.

  The dialog box is to be generated and added to the queue by a background thread using the following method:

      private void notifyUser(String msg) {
          UiEngine ui = Ui.getUiEngine();
          EncodedImage icon = Theme.getIcon(false, true);
          Bitmap bm = null;
          if (icon != null) {
              bm = icon.getBitmap();
          } else {
              bm = Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION);
          }
          synchronized (Application.getEventLock()) {
              Screen screen = new Dialog(Dialog.D_OK, msg, Dialog.OK, bm, Manager.VERTICAL_SCROLL);
              ui.pushGlobalScreen(screen, 1, UiEngine.GLOBAL_SHOW_LOWER);
          }
      }
  

  I checked the problem does not occur on the "BOLD", Pearl Flip, or 8100 with real hardware.  The problem never happens in simulators (tried about 6 models).

  Any thoughts?  Is there something wrong with the code above or spark a dialogue for a non-event like this thread?

  Thanks in advance...

  The workaround for the "locked" State is to implement MemoryCleanerListener in your main application class. This listener is notified when the device is locked. We define a property here "deviceWasLocked", then query this property of our custom popup dialog to determine if we arrive on a locked screen.

  Then we switch our application in the foreground (requestForeground) that clears up this particular issue, and any event goes well.

  The problem of 'missed calls' is a little more complicated, unfortunately, but you're not complaining that one!

  Having said all this, I'd love to see other ideas on how to solve this problem. We strugggled for several weeks with this problem when the 4.3 is released.

• Problem chart icon

  My icons do not have the correct graphics. They work very well. I just need to know what is the cause, how to prevent, & how to fix it.

  

  Possibly - http://support.microsoft.com/kb/2396571 so it looks identical to your problem.

  See also - http://www.sevenforums.com/tutorials/49819-icon-cache-rebuild.html for more details.

  It will be useful.