PROBLEM command viVxiCommandQuery

Hello

I have a problem with the command viVxiCommandQuery (Visession InstrumentHandle, ViUint 16 Mode, command ViUint32, ViUint32 * response).

ES - this the same command as viQueryf (vi, writeFmt, readFmt,...)?

I understood what is the first argument to this function, but pour the rest I don't see. I found information on the VISA documentattion but it does not specify what is the mode (a by sending a command or a request of 16 or 32 bit en TCP/IP), for the 3rd arguments, the command is of type ViUint32 which does not have a string of character for the last argument.

The but of my application is send United Nations command via TCP/IP to a SMJ100A from rohde & Schwarz.

Thanks in advance for your answer.

Kind regards

Vincent

two copies

Tags: NI Software

Similar Questions

  • (Redirected) Aurora R4 CPU Fan problem (command center)?

    My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

    I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

    My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Telnet Windows commands

    Can anyone provide an example of how to execute commands to telnet to a machine virtual windows of Orchestrator.  I tried several options and I can't make it work.  The connection works, I can not all commands to run.  I guess that my syntax is incorrect.  I'd appreciate any help anyone can provide! Thanks in advance.

    var myTelnetClient = new TelnetClient();

    var ipAddress = System.getModule("com.vmware.lcm.vim3").getTokenIpAddress (token);

    Connect

    myTelnetClient.connect (ipAddress);

    Problem command

    myTelnetClient.sendString ("mkdir c:\temp\lcm");

    Unplug

    myTelnetClient.disconnect ();

    Hi Austin,.

    I managed to have a code that works here. I'm not sure that everything is necessary, but...

    var myTelnetClient = new TelnetClient();

    ipAddress var = "MyServer".

    Connect

    myTelnetClient.connect (ipAddress);

    opening of session

    sendString ("mydomain
    "" 'administrator');

    sendString ("myP@ssw0rd");

    Problem command

    sendString ("md c:
    Temp
    test");

    Unplug

    myTelnetClient.disconnect ();

    function sendString (msg) {}

    myTelnetClient.sendString (msg);

    myTelnetClient.waitForData (1000);

    System.log (myTelnetClient.receiveAsString ());

    }

    First of all, Rob was right. You need to log-in (like our Telnet client is not able to use your current Windows logon credentials).

    I use a function, sendString, so every time I have send a string, I also wait some time (1000 is 1 second) and not display text returned if. You don't have to bother for the "null" returned, it just means there is no message to us right now. In this way, you can debug your script easily.

    Then, note that you must use the username or DOMAIN\username to connect. As we are in Javascript, you need to escape the------in the chain. That's why I wrote
    whenever I need to. This is valid for the path too.

    Finally, the tool command line windows to create a directory is md. I don't know if mkdir works in telnet.

    Notes for those who are interested. You can use powershell also in this way. Just start powershell just after the connection.

  • in theme bilder image editor

    Please, give me an instance how to specify a path to the image to the theme preferences generator editor.

    The problem: command Edition returns to specified by wonder of Photoshop, but only opens an existing file. I tried '%1' and open/"%1' the same etc. Will I have the same problem with the change in the composer?

    And why, in a world that I can't reset by default?

    Thank you

    OK, there is place for developers RIM aka "known issues": I loaded my pictures, and then reset by default, and then edit in Photoshop has been activated. But you need to change a security permissions in order to save your changes to the graphics of the RIM.

  • Failed to get Microsoft Space Cadet Pinball to appear in full screen in Windows 7

    Is it at all possible to play Pinball Space Cadet mode full screen on a Windows 7 - system powered?

    I tried all compatibility settings, but nothing works.

    The standard screen (about 20% of the total screen space) is too small to have a good view of what is happening and the ball is too fast.

    Please help, anyone, thanks in advance

    Thom

    I had this problem (command FullScreen would go full screen, but only use the image of the small screen) for the lifetime of Windows 8 and 8.1, but in upgrading my computer, during which some system files have been changed, the problem I described has disappeared and now I order full screen the screens playing Pinball across the screen, as he did when I had Win 95, 98, Vista and Win 7.

    The upgrade was a hardware upgrade, so apparently some minor changes to System.  The problem of origin with Pinball (as I described above) may have been connected with the previous mobo, which apparently caused a sleep command requires to restart and finally the system would only run in Mode safe.  A new mobo (ram & cpu) and the video card brought the material to date and the problem of Pinball has been fixed.

    However, as I say, the fix may be with the software that was related to the change of equipment.

    I'm happy it's fixed and Pinball runs just once again.

  • Key command problems, Macbook Air

    In a first time, I realized that 'cmd + 2' not was not to give me a '@' but instead would turn tabs on chrome, same for the hashtag. But the "cmd + c" or "cmd + v" were operating normally.

    I went into system preferences and tried to restore all the default keyboard settings, still nothing. I had to go the keys command and Option before it finally worked. But then new problems, even if the "1,2,3...' buttons now worked with cmd I have to use ' alt + c/v ' to paste instead of the normal cmd + c/v. Also, before I had to press cmd + a keys "F1, F2, F3...". "to make them work (such as the volume, for example), now I have to use fn + 'F1, F2, F3...". »,

    It happened all of a sudden, I have a few theories of how it happened: I slept last night on my keyboard, I kept my laptop in a few days (software because of this problem maybe?), and finally, I connected my pair of speakers today (a thought that never posed a problem before).

    Although I managed to find a temporary solution, I want to get my keyboard will work as before. Anyone got a solution please?

    So, apple won't let me delete the question, if someone wants to know more about this problem here:

    As I said I fell asleep on my keyboard, because I spent the last hours of 10 studies, my brain was so tired that I forgot the '@' key is "alt + 2" and not "cmd + 2", I really spent two hours of navigation for the 'solutions'.

    So many children, go to sleep and do not leave final kill you.

    At soon xx.

  • name on applescript command problem

    I have a problem running this command in applescript.

    Tell application "Finder" to get the name of front window Finder

    I tried the command:

    Tell application "Finder" to get the name of the front window of the Finder

    and

    Tell application "Finder" to get the name of front window Finder

    Non of them works correctly and that is the problem that he returned.

    Can someone tell me what happened? Sorry if the answer is obvious.

    Your script will fail if no Finder window is present.


    say application 'Finder '.

    if not (exists before the Finder window) then

    make new window Finder

    end if

    the name of front Finder window

    end say

  • How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

    Scrolling speed is fine, but when you press the command key and then it becomes very slow.

    He does it with a mouse, but not with the trackpad.
    It does when the modules are disabled.
    No problem on Safari or Chrome.
    No problem on PC.

    I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

    Any help would be much appreciated.

    Thanks in advance!

    You use the mouse wheel to scroll?

    There are some prefs mousewheel, which control the behavior when you press the modifier keys.

    You can set the key to the action of each to 0 for normal scroll.

    See http://kb.mozillazine.org/About:config_entries #Mousewheel.

  • Premium HP: HP Premium - problems with the TRIANGLE_P command in the programs.

    I have version 2015 7 28 (8151) firmware and can not be updated any further because I have only the Android app.

    Maybe the next problem has also been fixed already in a more recent update, as a previous problem of mine. We'll see.

    I want a 3-dimensional triangle of the project on the screen using the advanced form of TRIANGLE_P.

    First the good news.

    The following program works:

    EXPORT experiment1
    BEGIN
    LOCAL P1, P2, P3;
    RECT_P(); Clears the screen

    P1: = {100,100,75};
    P2: = {200,100,75};
    P3: = {100,200,225};

    TRIANGLE_P ({P1, P2, P3}, {{1,2,3, #FF}});

    GEL;
    END;

    Explanation: I define three dimensions 3 points P1, P2, P3 and insert them in a list in the triangle command. What are the angles of the triangle.

    In the second argument, I defined the triangle specifying these points in the first list indices, which are 1,2,3. #FF means that it is blue.

    Here is the result:

    It's not very spectacular, because the only thing that the program leaves the coordinate z points away and drawing of the triangle 2 dimensions resulting. So there is not a lot 3-dimensionality thereon. In fact nothing.

    Now, I'll try to do a little more complicated by the third argument, I have left aside until now. The first 2 arguments are the 2 lists of lists.

    The simplest form is a rotation matrix or list trivial-{1}:

    Syntax: TRIANGLE_P ([G], points_definition, triangle_definitions,

    rotation_matrix or {rotation_matrix or - 1, ["N"], [{eye_x, eye_y, eye_z}

    or - 1], [{3Dxmin, 3Dxmax, 3Dymin, 3Dymax, 3Dzmin, 3Dzmax}]}, [zstring])

    User manual

    The simplest rotation matrix is the identity matrix which consists of all zeros except the diagonal elements, which are 1. So I create this way M1.

    Now, I have replace the triangle command by:

    TRIANGLE_P ({P1, P2, P3}, {{1,2,3, #FF}}, M1);

    Or

    TRIANGLE_P ({P1, P2, P3}, {{1,2,3, #FF}}, {-1});

    "Two return output programs: ' error: invalid entry.

    "I tried several forms of the third argument, for example by specifying all possible sub arguments, but all what I try, I always get nothing else than: ' error: entry invalid.

    So I would like to know if if my firmware update is the cause, or I did something wrong or it is a bug.

    Hello

    I thought about it...

    The 'problem' is that, with only 3 entries in the first list and matrice matrix of a rotation, think the system, the first review, 3 3 points x, y parameters are, z coordinates for each of the 3 points. On second review, we see that they are not valid and an error. This stems from the fact that the Triangle can take so many different types of arguments and that it is not always easy to distinguish between the different forms.

    You can make sure the system interprets the input data in the form that you want to ensure that the list of the point has at least 5 Articles (even if they are not used). Then, he will work as in:

    EXPORT tt
    BEGIN
    LOCAL P1, P2, P3;
    RECT_P();                   Clears the screen

    P1: = {100,100,75};
    P2: = {200,100,75};
    P3: = {100,200,225};

    TRIANGLE_P ({P1, P2, P3, P1, P1}, {{1,2,3, #FF}}, [[0.5,1,0,0], [0,2,0,0], [0,0,1,0], [0,0,0,0]]);

    GEL;
    END;

    Cyrille

  • Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to

    Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to another folder. All known solutions?

    This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Problem with Xcode command-line tool

    Hello

    Last week I upgraded my macbook pro with the latest OS X Capitan and 7.3 of Xcode.

    I also installed the command line for Xcode Tools.

    But there is a problem because the "command-line tools" in Xcode do not work, for example, I am getting following error:

    MyMacBookPro-5: ~ make amitc$ xcrun

    xcodebuild: error: SDK '/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.10.sdk' is not found.

    xcrun: error: cannot find the utility 'make', not a tool of development or on the WAY.

    Does anyone know any solution to this problem?

    (I don't understand why he's trying of MacOSX10.10.sdk, while it must search for MacOSX10.11.sdk).

    With our thanks,

    Amit.

    You agree with the terms and conditions of the license?

    sudo xcodebuild-license

  • Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    If a shortcut is used while Firefox is already open the error will not occur.

    For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

    Hope this helps.

    Olivier

  • Error Msg: "there was a problem sending the command to the program" when you use a shortcut for FireFox

    This only happens when I use a shortcut to call Firefox. I am running Windows 7 Professional. The Firefox window opens after the error message occurs, so I would class this as a gene.
    Many help comments mention 'ddeexec' removal of Firefox registry entries. It worked for a while (it seems to be related to updates of Firefox), but now no longer works: ddeexec is removed, but the error message persists.

    I found a fix for Win 7 (x 64) based on two observations:

    1. the waiting period does not exist if Firefox is already running.

    2. There are (at least) two types of shortcuts: Application and URL. When Firefox is the default browser, shortened URL get a timeout message. A the application shortcut to Firefox works without any problem.

    Follow these three steps to create a new shortcut that runs Firefox with the URL as a command:

    1. create a shortcut to the Application either by copying an existing shortcut, or right-click on the desktop, select new | Contextual and choose the location of Firefox.exe.

    2. then right click to open the new shortcut, properties. On the shortcut tab, you will find:

    Target: "C:\Program Files (x 86) \Mozilla Firefox\Firefox.exe.

    Start in: "C:\Program Files (x 86) \Mozilla Firefox".

    3. copy the URL address, type a space after the quotation marks of the target and paste that URL, it should look like this:

    Target: "C:\Program Files (x 86) \Mozilla ' http://postini.com

    I used a short URL to this example to fit on a single line, but the useful commands can be much longer; for example:

    https://login.Postini.com/exec/[email protected]

    The second example opens a connection to Postini spam filter window and between your email for you. Below is a screenshot of a tab popup properties shows in the middle of the target where Firefox ends the line, and the URL starts.

    -Jim

  • star wars command center problems

    Hello, I just took possession of a portable star wars limited edition, I can open the command center, but I need to know how to raise R2D2 and the small figure in light, thank you very much

    Hi @garyrwhitaker,

    Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice. You have a rewarding experience, I would include the following link for your perusal and reference. First time here? Learn how to publish and more.

    I understand you've got a laptop HP from Star Wars limited edition. You can open the command center, but t you want to know how to make appear R2D2.  After some research, I believe you can do it by choosing one of the special themes Windows as we should be R2D2.

    Please let me know the results.

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem. "Think about scoring the post that solves your problem as" ","accept as Solution " to help other members of the community! To say thanks for the help, please click "Thumbs Up icon" below.

  • Problem: Using the command 'msg' with 'system Exec.vi.

    I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

    I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

    I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

    @echo we
    CD c:\Windows\System32\
    Msg.exe /server:localhost * test

    When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

    Potential quirks:

    I discovered in a different place under a machine to receive these messages they need to have a registry entry:

    "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

    Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

    Any ideas why I'm having a problem?

    TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?


Maybe you are looking for