PROBLEM COMPLETE TRANSACTIONS ONLINE WITH PAYPAL AND CLICKBANK

Similar Questions

• I paid with paypal and you want to change the way I pay as a student...

  I'm a student, so I paid already with paypal, three times. And I want to change it in my account and I only change my credit card, but I don't want to pay by credit card, I want to pay with my PayPal account. That I can't change. so I paid the month of may for three times, but I'm still on a free trail. don't know my serial number, and he says that he idlers. So frustrated now cause I don't know how to fix it * and I had 11 days to do.

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Problem w / pkg install with itunes and win 7

  I am trying to install itunes 10.6 w / Windows 7.  Error "there is a problem with this windows package install."  A program required for this install to complete could not be run.  I tried to run each of the installation of 6 files individuall and it fails with Apple Softwar Update.msi

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  ----------------------

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  How to make a backup of the registry in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx

  Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

  -------------

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  ----------
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926

  iTunes

  for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

  You

  might try the uninstall and reinstall as a new user to see if that helps:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If

  not, I recommend you contact Apple for assistance.

• Battery problem (CPU a bottleneck) with BIOS and Intel SpeedStep technology.

  The question is this:

  1. If the AC adapter and the battery are both connected on the X201T, the speed of the CPU (base clock) is capable of running at the maximum speed of 2.13 GHz as indicated by the specifications of the system.
  2. If only the battery is connected, the speed of the CPU is still able to run at maximum speed of 2.13 GHz as indicated by the specifications of the system.
  3. If only the AC adapter is plugged in, the speed of the CPU is now 'limited' and can run only at 1.2 GHz.
  4 in addition, I also ran Windows Experience Index assessment (built-in to Windows 7) and received a score of 6.3 with the battery or the AC adapter is plugged in, but only a score of 4.2 with only the AC adapter.
  5. the system is significantly slower and cursor shifts are more noticeable when the battery is disconnected.

  Control Panel:
  A.the system has been set at maximum Performance with all the power saving settings turned off. The system has been fully updated for the latest updates and possible drivers from 12/03/10 at the time of the breathalyzer test.  No other software is installed that came with the ThinkPad when I received it.
  B. with the connection and disconnection of the battery, the system has been individually disabled every time and restarted.
  C. I ran full system Test and system through Lenovo ThinkVantage Toolbox stress Test and received no errors to ensure that the question was not due to system errors.
  D. I used CPU - Z 1.56 v to monitor the speed of the CPU, all running Intel BurnTest v2.50 to insist on the system.
  E. the problem is reproducible and probably a system wide problem/bug, because I tested it on two my X201T (I know it's weird, but I have two of these amazing machines).

  Update:

  After further testing, I've isolated the problem of "Bottleneck the CPU processor without battery" occurs only when the technology Intel SpeedStep in BIOS is enabled. Only when the SpeedStep technology option is cleared "completely", this problem will not occur. However, if the SpeedStep technology is enabled, even when the AC is set on maximum Performance, the CPU processor speed is limited when the battery is disconnected with the tablet running only on the AC adapter. This seems to be a bug in the BIOS.

  If someone can communicate this problem Lenovo Engineering Department so that they can arrive at a solution, that would be great and very helpful. So I can work on my system without always having the battery plugged.

  There are 2 solutions for that.

  You spend more money for a 90W power adapter (which I did), then you can disconnect the battery and it will run at full speed.

  Or, you go into the BIOS and turn off IntelSpeedStep.

  Unfortunately, without the battery, when only using the 65W adapter, your speed will be throttled (I think it's a mistake on the end of Lenovo, but they claim it's normal).

• Problems running Setup.app with e4200v2 and Mac network

  I bought a router e4200v2 about a year, but somehow, it got lost in my computer room and I don't a not localize until quite recently, just after I bought a new iMac running Yosemite. The new iMacs don't have an optical drive, so I downloaded the Setup.app since the support site of Linksys without problem.

  However, when I run the Setup.app, he starts a Setup Smart Wi - fi but stalls when it comes to about 25% of fact, with a message "could not find your router." I called Linksys, and even if this isn't their period of free support they gave me a free call since I'd just take the machine out of the box.

  We couldn't get the Setup.app to work, so they talked me through a manual installation. I can now access the net of my Wired iMac or any of the various devices wireless around the House (telephone, laptop, etc.).

  BUT it was only after I hung up I have realzed that the different functions available from the diddn t Smart Wifi configuration (for example, guest access) appear to be available.

  I don't want to pay for a support call, but it's really irritating. The Setup.app still does not work, and I see no way to not get LLA.

  Can anyone suggest a solution? Am I missing something simple?

  Thank you.

  I do not recommend the use of the software to configure the router in your case.

  On the contrary, to connect to the router and use the link below to access and configure.

  http://192.168.1.1

  Default user name: admin or empty

  Default password: admin

• Audio post problems when you work with AnimateCC and FlashCC

  My colleagues can not yet updated to AnimateCC, although I use it already.

  They are if they open my files in FlashCC (I'm careful not to use specific newer tools) Audio post parameters are not defined for what I put them to.

  We always use MP3 / 80 / stereo / better that our workflow & event sound settings but FLAs they open is displayed as MP3 / 16 / mono / fast.

  Not only that, if they save the file to FlashCC after setting the parameters of what they should be, when it is reopened they always see the quick / mono / 16.

  I can recreate this problem on my own machine using AnimateCC & FlashCC.

  Our only workaround is to copy the images to a new file in FlashCC (until they are able to update their facilities to AnimateCC).

  Can you advise if this is a known bug or something that can be fixed in a later version of animate so that people can continue to use older versions of your software?

  I tried with Flash Pro CC, and once again the publication settings were correct. I downloaded your original sample files, and all of them show 80 Kbps.

  For what it's worth, mabrouk might have used Windows, but I used Mac OS, this isn't a question of Mac/PC.

• Quality problem of sudden impression with LR and PS - please help

  I have the worst time to find this problem of mine. I use Lightroom 4 and CS3 to edit and print photos. All of a sudden all my color photos began to have these whitish bands light running each print. On color photos. Apparently, when I print a black and white photo quality is perfect. Naturally, I thought that the question was of the printer. So, I contacted Canon (I use a mg6320), and they sent me a new printhead - does not solve. New ink cartirdiges - does not solve it. And then finally a brand new printer - that still does not solve the problem!

  When I use one program other than Adobe, printing is perfect. So WHY when I print by Lightroom 4 or 5 (I downloaed the test to see if it was just a question 4) or Photoshop cs3 I get these bands? It's driving me crazy. As I told all of a sudden started out of the blue...

  I have attached a scanned copy so that you can see...

  I tried so many different setting in LR all with the same results. There is a general faded to look at the pictures as well. On my screen this photo is much darker with less overexposed areas. ???

  Any help will be greatly appreciated!

  Manda

  It seems to me that if you have your print quality setting in the driver of your printer the standard value or project rather than set for best picture. This setting should be changed in your printer driver which is accessible from the button in the lower left corner of the screen when you are in the print module.

• Problems of blackBerry Smartphones with internet and e-mail-new phone purchased internationally through E - bay

  Hello

  I have three BBs - the latter is a Pearl Flip I bought new on e - bay.  After spending several hours trying to find why I keep getting error messages when I try to set up my email, I realized that the phone only has 5 service books and doesn't have a book, 'Provisioning '.

  I tried to get online through my BIS to get new books, but I don't seem to be able to.  I have a SIM card only through TESCO which I think are using O2.  When I rang TESCO to clarify, they said that my BIS was BB!  I tried to explain that they were the carrier, but that the call was cost me at a premium rate, I dropped!

  I tried to enter PIN and IMEI of the phone the 02 and T-Mobile (the phone is locked to T-Mobile originally), but they do not recognize the numbers.  I am now stuck can you all please help? All other functions are fine.

  Thank you

• Problems Smartphones Wifi blackBerry with browser and set email account in place

  Hello

  I'm not a person very tech-savy, but now,.

  I recently got my blackberry 9780 and I'm currently NOT on a data plan. I tried using wifi on the phone, but I always get the message "Cannot connect to the server" when I open the browser or when I try to configure my email account. I disabled Moblie Network Data Services so that I don't use any data by accident.

  I use a Mac Airport Extreme Base Station 802.11n.

  * do not know if this help *.

  When I look under "service status" next to BlackBerry Internet Service: not connected & even with BlackBery Enterprise Server.

  * When I turned on the mobile, browser data works also very well... but account e-mail implemented yet "impossible to connect to the server.

  Any help would be greatly appreciated!

  Thank you!

  The BB logo would indicate that your BB is connected to BlackBerry (BIS) Internet Service. But, since you don't have a data plan, you get not BIS. In addition, the native browser can never work without a data plan. I suggest that you refer to this FAQ:

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• Problems to use LAG with 2504 and 3560

  Hello, we recently bought a 2504 wireless controller, and I can't using the aggregation of links (LAG) to connect the WLC to the network.   I was able to connect properly to the contoller using a single link, but as soon as I activate LAG (on the switch and wlc) I'm unable to access the controller.  I think that I have the correct position of the switches as the port channel is active and shows active on the controller via cdp.

  I can't do a ping of the controller, but I see it via cdp.

  The controller runs 7.4.100.0 with bootloader 1.0.18

  The switch is a WS-C3560G-48PS and running 12.2 (25r) SE

  The controller is 10.10.10.202.

  No access-lists on interface vlan switch

  Note that I have currently the 2nd stop of the port as the first member of the Association is active.

  Thoughts?   Any help would be appreciated.

  Thank you

  Bryan

  #sho ip arp 10.10.10.202

  Protocol of age (min) address Addr Type Interface equipment

  Internet 10.10.10.202 143 5478.1aad.1f0b ARPA Vlan1

  #sho address mac-address-table 5478.1aad.1f0b

  Mac address table

  -------------------------------------------

  VLAN Mac Address Type Ports

  ----    -----------       --------    -----

  1 5478.1aad.1f0b m 1 DYNAMIC

  Total of the Mac addresses for this criterion: 1

  #sho cdp neighbors detail

  -------------------------

  Device ID: wubc_wlc

  Workshop / entry:

  IP address: 10.10.10.202

  Platform: AIR-CT2504-K9, capacity: host

  Interface: GigabitEthernet0/40, ID of Port (outgoing port): GigabitEthernet0/0/1

  Hold time: 153 s

  Version:

  Name of the manufacturer: Cisco Systems Inc.  Product name: Cisco Controller Product Version: 7.4.100.0 Version RTOS: Erro Bootloader Version: 1.0.18 Type of Build: DATA + WPS

  version of the announcement: 2

  Duplex: full

  Workshop / management:

  -------------------------

  Device ID: wubc_wlc

  Workshop / entry:

  IP address: 10.10.10.202

  Platform: AIR-CT2504-K9, capacity: host

  Interface: GigabitEthernet0/40, ID of Port (outgoing port): LAGInterface0/3/1

  Hold time: 148 s

  Version:

  Name of the manufacturer: Cisco Systems Inc.  Product name: Cisco Controller Product Version: 7.4.100.0 Version RTOS: Erro Bootloader Version: 1.0.18 Type of Build: DATA + WPS

  version of the announcement: 2

  Workshop / management:

  # sho etherchannel summary

  Flags: D - low P - port-channel

  I have - autonomous s - suspended

  H Eve (LACP only)

  R - Layer 3 S - Layer2

  U - running f - cannot allocate an aggregator

  u - unfit to tied selling

  w waiting to be aggregated

  d default port

  Number of channels: 1

  Number of aggregators: 1

  Protocol for the Port-Channel port group

  ------+-------------+-----------+-----------------------------------------------

  1 Po1 (SU) - Gi0/40 (P) Gi0/42 (D)

  #sho run IM int 0/40

  Building configuration...

  Current configuration: 123 bytes

  !

  interface GigabitEthernet0/40

  switchport trunk encapsulation dot1q

  switchport mode trunk

  channel-group mode 1 on

  end

  #sho run IM int 0/42

  Building configuration...

  Current configuration: 133 bytes

  !

  interface GigabitEthernet0/42

  switchport trunk encapsulation dot1q

  switchport mode trunk

  Shutdown

  channel-group mode 1 on

  end

  #sho run int port-channel 1

  Building configuration...

  Current configuration: 92 bytes

  !

  Interface Port - Channel 1

  switchport trunk encapsulation dot1q

  switchport mode trunk

  end

  Make sure that your markup of the wlc management interface.

  Sent by Cisco Support technique iPhone App

• Due to a problem I reinstalled to with POP3 and he proceeded to download ALL my emails from 2010 - is it possible to delete ALL these block?

  Windows 8

  POP3 is supposed to download but it can be configured to leave the mail on the server.

  Look at the tools/account/Server settings.
  (Or three_bars_icon / tools/account settings/Server settings)
  The second part is what is on my picture.

  If you leave your mail on the server (see image) you must mark a way to remove them. either by age or (preferably) by you deleting them or both.

  If you delete the Inbox in the "hidden" directory, as you suggest, the only result would be that would create a vacuum and all mails on server should start to download.

  If you have left on the server and you want to remove, mark them in the Inbox and delete. Then empty the trash and Inbox, and of garbage compact.

  is that more clear?

• Problem when the PWM signal combinning and analog signal TOGETHER!

  Hello everyone,

  first I DAQmx 6212, and I need to run the water pump small (9V - 16V) that should be driven by a PWM signal; I also have a motor (5V - 13V) for a water supply which must be controlled by an analog signal and it has built in a force feedback potentiometer, I logged onto this potentiometer correction + 5V the DAQmx and used the output voltage of the third extremety as a value to diagnose to know the position of the engine.

  My VI shows:

  1 is a normal meter production to create my PWMout signal.

  2 is an analog input, I use it as a PWMin to the LabVIEW to diagnose what is happenning in my pump water through the cycle and frequency.

  3 is an entry of the third extremety of the analog potentiometer.

  4 is an analog output that I used as power supply of the motor valve and I used an AC/DC amplifier for aplify signal the DAQmx and the motor road, between the two (3. 4.) I made a comeback with a few calculations, I had a P-controller to know the real position of the engine valve.

  My problem:

  When setting to 1. and 2. in the same VI only, I get an own PWM output with no problem.

  also with 3. and 4. in the same VI only i can control the motor valve without any problem.

  but when I put all these 4 set found in the attached VI, I have a problem as the engine valve turn continuously without stopping even if I change the position of the valve between 0 and 100%, I should mention that I see a PWM normal outside a signal on my oscilloscope, another thing to delete one of (1 or 2)  and run the engine valve VI works fine without any problems.

  so this my problem, if you can think of any solution please let me know.

  Thanks in advance for your help.

  Kind regards

  Caliente

  Here's your VI, slightly modified so the two analog inputs belong to the same task.  This if only for purposes of illustration, I him have not tested.  You will still need to do some debugging.

  While changing your VI, I noticed another potential problem with your original configuration.  You have configured the two tasks of AI for the same frequency, but read you 10000 samples of one of them and only 100 samples from the other (and throw it most of it).  Data acquisition data are buffered, and if you read as fast as you acquire, the buffer fills eventually.  If you read 10,000 samples of a channel, and the other channel acquires at the same rate, then when you read from the second channel you will get old stale data or an error full buffer.

• I tried to send an email with attachment and without attachment and received the "windows live Hotmail was not able to complete this application. "Microsoft may contact you about problems that report you.

  I tried to send an email with attachment and without attachment and received the error "windows live Hotmail was not able to complete this application. "Microsoft may contact you about problems that report you.

  Hi AbdiNur,

  This forum is for comments on the Microsoft Answers site.  As your question is on Hotmail, I recommend posting your question on the forums for Hotmail:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  Thank you for using Microsoft Answers!

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

  Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

  Hey again,

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps!

  Curtis