Problem connecting Dlink - the connection with this computer still only shows "Local".

Similar Questions

• Firefox does not connect to the internet on this computer, if it does on another computer and Internet Explorer connects also with no obvious problems.

  About 1 year ago, I helped set up Firefox on my mother's computer. It worked fine until a couple of days. Now, he is more connected to the internet. The system is Windows XP, service pack 3. Internet Exporer connects to the Internet on this computer. Also, I have another computer with Firefox and it works without problem, wireless. We tried to remove Firefox and then reload and which did not help. We receive no error message. Internet and Firefox simply do not seem to see each other.

  Sounds like a firewall issue, seems to affect
  More than the other browsers, Firefox.

  • Firewalls - MozillaZine Knowledge Base

    http://KB.mozillazine.org/firewalls

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• I was using Microsoft Fix and one of the messages for me was that "more than one user is currently connected to this computer"

  While checking on Microsoft 'Fixit' to see if everything was working OK, I got a message saying as follows: more o no user is currently connected to this computer. »

  I can't understand this because I am the only user on my computer.  No other Member of my family is using my computer, so can you help me this please?

  Thank you.

  Hi Deepak B,.

  Thank you very much for your help.  I did as you suggested.  First: the Safety Scanner did not find a malware, etc. on my computer, which is really good.

  Second - accounts - outside myself - on my computer. I was surprised to see there was a guest account as well as mine.  I now extinct 'guest account '.  I can think about is my daughter and her husband who make us visit once a year.  April, my daughter knows a lot about computers, so I think that it is the culprit!

  That is the problem solved, and I am grateful for your help.

  ElmGrove

• Information system may not collect information. Unable to connect to this computer. Check that the Winmgmt service is running.

  Information system may not collect information.

  Unable to connect to this computer. Check that the Winmgmt service is running.

  My problem has been set by following the steps:

  1. click on start-> type CMD-> right click on CMD of the result-> click on run as administrator

  2. type the command net stop winmgmt and press enter

  3. Open command prompt and click on start and type system32-> open the folder system32 in the result pane.

  4. in the system32 folder open Wbem and locate the repository folder

  5. right click on the repository, then click Rename

  6. change the name of the drop to Repository.old folder

  7. switch back to the command prompt and type net start winmgmt and press ENTER to run command

  8. close all windows and restart the computer and try to Msinfor32.

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  original title: no camera not connected to this computer.

  Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  Help, please.

  Hi Shaykc,
  Here's a quick walk to implement this cam:
  http://support.Microsoft.com/ph/7746#tab1
  Eddie B.

• HP Pavilion Notebook-15-p108tx: problem connecting with specific programs

  Hi, I had problems connecting with specific programs recently. I'm still able to communicate online through web browsers. Mozilla Firefox works fine, but Google Chrome still has some problems loading of specific pages or they don't load at all. The main programs I am having difficulties with are mainly games platform programs like Steam, Battle.net, and League of Legends, and I'm unable to go online or to connect to their servers.

  I never had no problem connecting like these last two years that I've owned my laptop, until recently. I think it was the 6th or 7th of may these problems started.

  I updated my drivers and was constantly check to download the most recent. I don't know if it's my internet provider, but I was also constantly check the State of the network to ensure that the services are very good.

  If anyone else has this problem and if there are any suggestions that you think could help solve this problem, it would be appreciated.

  Thank you

  Jasper

  Hi Jasper,.

  Thank you for the update. I think that your computer have a rootkit infection. Most of them were inside of the Chrome Extensions.

  Here's what you need to do.

  Open chrome

  Click on the Menu bar in the upper right

  Click more tools

  Click Extensions

  Please search for suspicious extensions that does not belong to the computer, especially ads. Once you identified, simply click the trash can icon then Chrome close then reopen it again to see if you can connect to your desired game. If this isn't the case, then proceed as follows.

  Manual removal of suspicious files (if you are uncomfortable with it. If this is not the case, then run System Restore from safe mode with command prompt)

  Manual removal (I miss the old days of MS virus removal )

  Go to RUN type %temp% , and then delete all folders by pressing SHIFT + DELETE

  Go to Control Panel and then locate all the apps that you think a form of ads

  Go to safe mode with network. Run Malwarebytes in that State

  Then run Tweaking tool to fix everything that has changed since your computer

  http://www.Tweaking.com/files/setups/Tweaking.com_windows_repair_aio_setup.exe

  If your not comfortable with the troubleshooting steps may perform the system restore on the day, it was working fine.

• XP hangs at startup and the dialog box provides the following: a problem has prevented Windows to check exactly the State of this computer

  I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc.  After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer.  To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen.  If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs.   I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen.  I am able to get to a command prompt, if I select Mode safe mode with prompt at startup.  FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive.  Any help to resolve this matter will be highly appreciated.

  I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.

  At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
  My repair CD installation was: Windows XP sp2

  In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.

  I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.

  I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.

  Please let us now if this helped you.

• When I opened my LifeCam shortcut, I find a message that say: there is no cam connected to this computer?

  I got a new cam, Microsoft LifeCam VX-700. I installed it is the file installation, which is LifeCam.exe Version 6.2.29.0, and in the final phase the instruction tells me to connect my lifecam then restart my PC. After I have my Pc is open again, and when I began to open the lifecam sortcut I background this massage: (there is no cam connected to this computer)? I don't know what the problem is and really I need it works well to have a good time with my cam and its dashboard. IM waiting for your reply soon.
  Thank you all very much. :)

  Hello Ossama El-Nady,

  Thank you for your message.  Click HERE to download the latest version of the software for your webcam.  It is possible that the driver available for download is newer than the driver that you received with your webcam.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My Microsoft LifeCam program gives me a message that: "there are no cammera connected to this computer.

  A few months ago, I unplugged my computer to go to my friends for a LAN party House, when I am back and plugged my LifeCame VX 2000, and started the software called Microsoft LifeCam, it gave me a message telling me that there is no cammera connected to the computer.

  I then went to the Device Manager and it says I have a vega USB 2.0 connected and nothing on a Microsoft LifeCam.

  I also went to check on Skype and he also said I have a vega 2.0 USB connected.

  Another strange thing is that only the microphone of this "vega USB 2.0' works on Skype and not video.

  I have windows 7 ultimate 64-bit, I defenitely have the system requirements, because after all, it's a gaming PC.

  I have the latest drivers for and software as far as I'm concerned, because I checked in the device for Update Manager and he told me that all my drivers are up to date.

  Hello
   
   
   
  Method 1.
  With LifeCam VX 2000 connected in the not working USB Port...

  (a) open the Device Manager and search for imaging devices -> Microsoft LifeCam VX 2000 and Uninstall. (no need to remove the system drivers, can leave installed)

  (b) now search sound, video and game controllers -> Microsoft LifeCam VX 2000 and Uninstall. (also good can leave the drivers in the system, no need to delete)

  (c) now unplug the webcam not workingUSB port, wait a few secconds andplug a job.

  succesfully d) wait a while until it initialized in the system.

  ((e) now doing exactly the same things, as described in stage a) and b).

  (f) now change ports USB again, wait that it is properly installed in the system sayingready to use.

  After this webcam should work and Microsoft LifeCam application should detect it in the first USB port which did not work before, saying"There is no camera connected to this computer".

   
  Now check if the camera initializes and also if she also works in Skype.
   
  Method 2.
  If the problem persists, you can see the methods listed in the section below.
  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software
  http://support.Microsoft.com/kb/933311
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New HP Envy 4500 will not connect with my computer

  New HP printer shows blue light of connection with my wireless network but the printer connects with my computer (Windows 7 64-bit)

  I tried troubleshooting with doctor without success.  I thought about the restoration to the manufacturer's specifications. but worried about this procedure.

  Confused.

  Help please

  Adnilybrek28

  Welcome to the HP Forum.

  There is lots of useful information to the Web site of your printer.  In addition, the most important thing you can do is to install the full features software for your printer.  The installation process should help you with the login process.

  General instructions to install the printer software

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open of printer drivers HP ENVY 4500 e-all-in-one
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  •         Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  •         Scroll through the list of videos back until you find the video that best fits your situation.
  • Connection USB: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including Manual, pages How-to's , Troubleshooting and SOLUTIONS section and alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  When the answer is a good fix or workaround, click accept as Solution !

• A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  Error comes when you try to connect.

  -able to login in safe mode

  -J' tried regsvr32 regwizc.dll, regsvr32 licdll.dll from start-> run

  -Tried system restore

  Any other solution?

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer
  http://support.Microsoft.com/kb/914232

• I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine.

  I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine. Can someone help me with this?

  Hello

  Please try the steps in the following thread

  I have problems connecting to Business Catalyst Muse.  When I try to publish, I get a message saying his time trying to connect with my Adobe ID - and check the network connections.  All of my connections are very good... Muse is connected to my Adobe