Problem connecting to HP DJ5900 via the USB port on the router

Similar Questions

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• Wreg54g lost connection after a reboot of the router

  Hi everibody! I need your assistance if anyone can help me... Recently, someone helped me and installed my Wreg54g.after some time, I had to reboot my router so I can connect my phone (it had to be directly to the router... so I had to reboot). After this operation, my amplifier lost blue light, a red connection.one... so I pressed the auto configuration button, two lights transferred to the Blues, but again, I do not have the full signal on my comp.what I did wrong, how can I solve this problem?

  According to me, that the settings on the range extender had been dirty so you press the AUTO Setup button when you tried to reconnect if it is understandable. What I suggest, is to ensure that the wireless internet works fine via the router, then on the WRE54G, configure the wireless settings again manually (without executing the implementation of CD) the same thing with the router. Check on the items below to guide you in the implementation of the Extender manually. Moreover, firstly, the Extender reset before the reconfiguration.

  Setting the amplifier without the installation CD

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=4d0870bf247a47e5b49b945a7a1ff515_Setting_up_the_R...

  Other references:

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=a3f6ea1b147844c090f7227d504ddbc1_.XML&PID=80&resp...

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=3723920ab5ec46f0a6d6a4f831e55b06_1488.XML&PID=80&...

• connect to hp 7525 to the router using kat5

  you want to connect photoject hp 7525 router without using wireless.  a pc at the opposite end of the House cannot be connected wireless, but there kat5 connection to the router.  other pc is also connected to the router with kat5.  need printer connected so two pc s everyone can print.

  You have a wireless router with some ports wired for computers?  Photosmart 7525 has a capacity of cable network.  Generally connect you computers wired to the router with CAT-5 connection and then connect the printer to the wireless router.  You would then install the drivers on each computer, specifying 'Wireless' for the connection.  The document here can help to set up the printer.

• BlackBerry Smartphones No micro sd, data connection, simply to transfer photos and other BlackBerry to the computer via a usb port

  Very well. So I don't have a data plan on my blackberry, so no not web email, I use it strictly for telephone calls, text messaging and taking pictures. I want to transfer my photos and my text messages sms from my phone on my computer. I would also like to transfer my ringtones if possible but I won't push my luck on this one here. I don't have a microsd card in my phone, so everything is recorded directly on the phone itself. I tried to connect my phone to my computer via the usb port but it does not allow me to go into things phone and copy on my computer. I also downloaded and tried the blackberry desktop manager, but he wants me to turn on the storage of mass media that will not help me because there is no microsd card in my phone. I want to record everything on my computer because I bought a new phone that is NOT a blackberry and I want to have my files on my computer. Can someone help me please?

  Thank you!

  Hello

  Try to download and install an earlier version of the desktop as the BlackBerry Desktop Software 4.6 software.  You should be able to download it here: https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  Which works best?  Another option is to get the CD that came with your phone and install the original version (assuming you still have it).

• How to connect Agilent 8163 b via the serial port

  I have a problem connecting to the serial port with Agilent 8163 b. The driver that I use is driver_vxipnp_816x_4_1_4.exe. The problem always message display "Visa resource not found. Check the HPIB-Bus address"when I use the components inside the"hp816x tree.vi ". However, I have no error if I use normal read and write VISA.

  Y does it can someone help me answer my question? Thanks in advance.

  Thanks for the reply.

  I face a problem that you use with GPIB-USB-HS due to the physical dimension, as shown. The width between the remote locking connector (FIR) and (w1) GPIB connector to the appliance is too small for the GPIB-USB-HS (w2) connect to this topic. If I unplug the connector RIL, tunable Laser will not be activated. So I have a few questions as follows.

  1. the LabView can always activate the tunable Laser if I unplug the connector at RISK in my case via GPIB?

  2. the LabView is compatible with GPIB connector (model x 10833) Agilent?

  3. is there a way to solve the problem posed by the RIL connector unplugged?

  The drop box

  P/S: version please is 4.84 to 8163 b.

  Thanks for the help and I'm too new in this field.

• My 5520 connects to internet via its usb port

  My University didn't allow wireless printers. My thought was to use the photosmart 5520 in wireless mode, connect to the internet via my dorm room ethernet connection using the usb port of 5520's with a usb adapter to ethernet. I'll just use eprint from my ipad to print.  will this work?

  No,

  Printing from iOS is only supported via a (wired or wireless) network connection.

  You can use Direct wireless for that matter (where the printer behaves like a router) to print from iOS on a LAN:

  http://support.HP.com/us-en/document/c03269394

  Shlomi

• Cannot "connect as current user" via the Security Server

  Hello community,

  I had a problem using the "connect as current user" option against a network outside of the enterprise security server. Connection by manually keying in the name of user and password works very well from the outside the company network For internal connections using a connection to the server instead of security server, everything works as expected without having to manually type the name of user and password.

  Single domain

  Customer of the horizon is 3.5.2 and joined to a domain

  2 Security Server 6.2.1 x

  2 Server 6.2.1 connection x

  On one of the servers of connection I got the following error message when you try to connect through the horizon customer using the option "connection as the current user:

  2015 12-28 T 20: 21:15.207 + 01:00 INFO (B 0, 08 - 0E34) < ajp-nio-8009-exec-7 > [PAEContext] (SESSION: a774_ * _b2fb) Idle Timer executor by using 1 thread (s)

  2015 12-28 T 20: 21:15.625 + 01:00 ERROR (0744-0AEC) < MessageFrameWorkDispatch > [ws_winauth] [GSSApiProcessServerContext]: negotiate failed. Error 0 x 0000000080090300 (not enough memory is available to complete this form) {SESSION: a774_ * _b2fb}

  2015 12-28 T 20: 21:15.626 + 01:00 (B 0, 08-04 B 8) WARN < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) failed connection GSSAPI: not enough memory is available to complete this application

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) cannot close the context 7 36 d-*-00D 3 with the error: unable to locate the context requested

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiAuthFilter] (SESSION: a774_ * _b2fb) authenticate GSSAPI performance problem - GSSAPI_ERROR: GSSAPI failed: not enough memory is available to complete this application

  The connection to the server has 12 GB of memory in total and 9.5 GB of memory free/available.

  In the windows event log, the following error message appears:

  BROKER_USER_AUTHFAILED_GENERAL

  Failed to authenticate the user < UNAUTHENTICATED >

  Attributes:

  Node = hostnameofconnectionsserver.mydomain.com

  Gravity = AUDIT_FAIL

  Time = Mon 28 Dec 19:51:16 THIS 2015

  Module = broker

  UserDisplayName = < UNAUTHENTICATED >

  Source = com. VMware.VDI.Broker.filters.GssapiAuthFilter

  Recognized = true

  Just tried from a machine arrived in the area via the Security server. Cannot open a session as the current user. We also enabled on the external connections of MFA, but I don't think that should make a difference.

• via a USB port on the guest VM

  Hello

  I will migrate our Blackberry for VMware Server.  We have a lot of servers already there, but the Blackberry server is the only server that we need occationally blackberry via USB as the will of some Blackberry active devices only if physically connected to the server, just do that via the mobile network.

  We have 6 guest VM used one of the USB ports on one of them to serve as a USB port on the virtual server of Blackberry?

  Thank you

  Yes it is possible with vSphere 4.1. Watch the tutorial below:

  http://vStorage.WordPress.com/2010/07/15/USB-passthrough-in-vSphere-4-1/

• HP slate 12 pro: files transferred via a usb port do not appear in the download directory

  I am running windows 8 on an old hp laptop and recently purchased a hp pro slate pro for my partitions.  I plugged my PC using the usb cable.  I created a directory in the download on the slate directory and copied my music files into this directory.   I used to connect to the computer of the PSG.  When you look at the files on the PC, they seem to be in the directory to download on the Tablet, but the download on the Tablet Directory displays no files.  Where are they?  I need help.

  Thanks for your help.  I had downloaded an application called Manager of files, and it's great.  I see all my files.  It can also connect to my pc using the Internet and it is very useful.

• Is there a way to connect my DV camcorder to my usb port on the computer instead of a 1394 port, that my computer doesn't have?

  My Canon Elura 100 DV camcorder has a usb connection, but Windows will not recognize it when it is plugged into the usb port on my computer.  (The manual Elura says to connect it to a 1394 port)

  Hello

  According to my research, you must use the supplied canon DV cable and use it. Many users is connected it correctly with the usb port. I recommend you contact Canon support on that.

  http://www.Canon.com/support/

  I hope this helps.

• Problem connecting to some websites on the internet

  My son is in the training camp at Great Lakes, HE.  I keep trying to go online marine sites to get info and will not open.  For example www.bootcamp.navy.mil I could access these sites on different PC, so the problem must be just this PC.  If you could help me ill get this please.  Thank you, Patti

  When you try to open this error message you get (the EXACT wording, including all codes)?

  Try to add the sites you want to visit to the list of Trusted Sites.  In Internet Explorer, go to Tools / Internet Options / Security / Trusted Sites / then add the websites you want to add.  Make sure that the only use https check box is NOT checked.  It can substitute for what is blocking your access.  What security 3rd party software are you using as appropriate (program or firewall or AV security suite)?  It is possible that this software does not block the connections.  Because I don't know what it is, I don't know how to tell you how to solve this problem, but in general it is the same with IE - find the routine that controls access and grant these permissions to sites (or generally lower security level).  In IE, I use a custom security level, but the default is medium-high (new in Tools / Internet Options / Security / Internet Explorer).  You can reduce this mouse to the next level to see if it gives you go (or you can try to customize what is a better option, but a little more advanced).

  If this does not work, please transfer your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where people who specialize in issues of IE as you connect to the web sites will be more than happy to help you with your problem.  If please include responses to questions here and the following steps you have already taken to try to resolve the problem so that you will get the best service.  BTW, I could access the site that you posted on my laptop without a problem - then you're right on it probably not be a problem with the web site and have something to do with the configuration of this computer's security.  I have no idea why it would limit restrictions to the marine Web sites (unless your system is not sufficiently secure and sites won't let you because of that - but I'm not sure know how to fix this because it is the opposite of what I have already suggested to solve the problem).  You should ask the experts at the Forum of Internet Explorer.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• 7520 - problems connecting to wifi and keep the printer connection

  My new HP printer 7520 does not connect to the wifi unless I unplug the router enter the wireless information, get a connection, and then reconnect the AT & T and I'm good. HOWEVER, if I turn off the printer I have to go through the all new to recover the wireless connection! I know that this has been a problem in the past, but I see not all new messages in this regard. I just bought this printer not realizing that she doesn't have an ethernet port, a big mistake. I'm very frustrated and hope someone has an answer for me! Moreover, I am on a mac with OS of mavericks.

  Thank you very much to explain that to me, I looked at the Configuration Page of HP network and it does not list my SSID twice, one on channel 3 and channel 11 so I'll follow up with AT & T if I have additional problems. But everything seems to work now, I turned it and turn it back on this morning and it connected after a few minutes. Turn off the IVP6 must have made a difference after all. Thank you very much, I like this printer and it's features, and I'm glad it now works as it should!

• How can I limit the number of connections to my PC for an incoming connection at a time. Multiple users are connected to my computer via the network.

  original title: limit incoming connections

  I want to restrict the number of connections to my pc for an incoming connection at a time.  I have several users that connect to my computer, using the same user name & password.  If someone tries to open a session, they fall out of someone who is already connected, without notice. the only solution I can think of is to limit the number of incoming connections to one.

  Hi willard.

  Your question is more complex that most seem to be on the answers. I suggest that you re-post on our TechNetforums where computer professionals can help you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• Unable to connect to the Internet via the router and Modem

  I've recently updated my version of office xp to windows 7. I have a D-link router and a modem with an ISP, and they are all correct, the son. I tried to install the router, but it cannot detect an ethernet cable, even if everything is good. I shot all three offshore, the computer, the modem and router for 60 seconds, reset the router and tried to configure a connection through windows, but nothing seems to work. I have a laptop that can capture the wireless signal and connect to the internet through this. But it's the computer that cannot find the modem or router and does not connect to the internet, I am lost on what to do.

  If your laptop is connected through the router (wireless), then your router is
  more or less OK.
   
  Go to Control Panel/network connections.
  If your PC has both wireless and LAN cards, turn off your PC wireless
  network, here's how:
   
  Right-click on the icon of your PC's wireless network connection. Select Disable. Wait
  until the end of this process.
  Then, right click on icon to connect to the LAN of your PC. Select Disable. Wait
  until the end of this process.
  Now right click on icon to connect to the LAN of your PC. Select Enable. Wait
  until the end of this process.
   
  Open a command window (cmd.exe). We will see if there is a LAN connection. On
  the command line type:
   
  Ping 67.195.160.76
   
  then 'Enter '. What answer did you (paste here). If you receive the answer
  pings, enter this next...
   
  Ping www.yahoo.com
   
  then 'Enter '. What answer did you (paste here). If you receive the answer
  pings, open your browser and go to www.yahoo.com. What is going on?
   
  Other things to check...
  You have DHCP enabled in your router configuration (preferred answer: Yes)
  Set the maximum number of DHCP users to 10 or more (you can reduce that
  later if you prefer).
  Is set to "obtain an IP address automatically" the IP address of your PC
  (preference response: Yes, unless you know what you are doing) or is it
  already a value in place.
   
  "staz2020" wrote in message news: a707c004-e504-4f14-b1d4-2bc465c15eb3...
  > I have recently updated my version of office xp to windows 7. I have a
  > D-link router and have a modem with an ISP, and they are all correct, the
  > son. I tried to install the router, but it cannot detect an ethernet
  > cable, even if everything is good. I have disabled all three, the
  > computer, modem router for 60 seconds, reset the router and tried
  > establishing a connection through windows, but nothing seems to work.
  > I have a laptop that can capture the wireless signal and connect to the
  > internet through this. But it's the computer that cannot find the router or
  > modem and does not connect to the internet, I am lost on what to do.
  >