Problem connecting to the Buffalo TeraStation with Windows 7 Pro

Similar Questions

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

  How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

  Hello

  Based on this and that is not a printer ready network. Has a network card?
  Another thing, you need to consider: HP does NOT support Windows 7 (for her) so you have to get this first.

  Good luck.

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Problem syncing via wifi palm tx with windows xp pro

  I had my palm tx for a couple of years and had no trouble to sync to my xp pro machine until today. I just got a new wifi-router/modem dsl from embarq (it's a ZyXEL P - 660 H - D1). I had no problem with my old wifi-router/modem dsl (D-Link DSL-G604T). They are two: 802. 11b / g I activated b and g on the new router.

  The Palm TX connects to the new router with wpa and I can surf to display web pages.  However, he doesn't "see" my office on the network. I made no changes to the my office network configurations. (The desktop is visible on the network when I use my lapto). I checked all the settings in my palm tx and my desktop hotsync Manager. I tried to connect with the IP address of the desktop computer in the Palm, but nothing works.  Can anyone think any configuration in the router that I could change to fix this?

  FYI I can synchronize using the cable, but I really prefer to use wifi for synchronization.

  Thanks for any help you can give. (I'm new to this community, sorry if this has been answered elsewhere, but I searched and could not find an answer.)

  Message relates to: Palm TX

  Hello darthemma, welcome to the Palm support community!

  It seems that you have the correct settings.  I can only suggest you do 'Static IP' for computer and TX in your router.  Who will assign the same IP address to each device at all times.

  Here is my standard "Wifi Hotsync" help file.  I hope that helps!

  WiFi HotSync with a TX

  1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.

  2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.

  3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.

  4. turn on the Wifi on your Palm and you connect to your router.

  5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).

  6. tap the HotSync icon big above the IP address and hang in there!

  7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.

  WyreNut

• Problems connecting an older Acer laptop with Windows XP using a dlink router

  I recently bought a new router dlink (N 300 Router wireless) and installed on my Dell desktop computer that is running Windows 7 Home Premium, desktop as well as my Sony Vaio laptop which runs the same OS connects fine to the internet. When I try to connect to the Acer laptop it does not connect to the internet, when I try to 'Fix' the wireless connection, he says he can't fix it. It allows to connect very well with older dlink router but I had to replace it, the new router says it's compatible with Windows XP. Does anyone else have this problem?

  Hi Bluemoongal,

  If you try to connect the Windows XP laptop to the wireless router, follow the steps described in this document...

• Problem connecting Wi - Fi networks unsecured with Windows 8

  Hi all!

  I have problems connecting to unsecure networks that require more authentication via browser thr, as networks of the hotel or Starbucks.
  The networks work wirh all other devices I have, but on my laptop with Windows 8, it doesn't.
  I get a "limited" connectivity and I can't sign on the browser page.
  Why is it so? How can I fix?
  Thank you!

  Hi Emme,

  The issue is limited to any particular Web site?

  This problem can occur because of network settings.

  Try the following and see if it helps.

  Method 1:

  I suggest you to run this utility from the following troubleshooting and check if it helps.

  Network troubleshooting:

  Open the network troubleshooter utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), saving troubleshooting network in the search box, touching or clicking on settings, and then type or identify and fix network problems.

  Resolution of the problems of Internet connections:

  Open the troubleshooter of Internet connections by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click Internet connections.

  Troubleshooting network adapter:

  Open the network adapter troubleshooting utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click on the network map.

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. press "Windows + R" key on the keyboard to open the run window.

  b. type ncpa.cpl, and then press ENTER.

  c. right click on your wireless network connection, then click Properties.

  d. click the wireless networks tab.

  e. under preferred networks, click your wireless network, and then click Properties.

  f. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Refer to the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  Notes:

  Reset the settings of Internet Explorer feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope that the information provided is useful.

• Need to connect to the home network wireless - Windows XP Pro - error with network password - needs to be 40bits or 104 bits...

  I have a new laptop at home which has windows xp sp 2 is installed.  I am trying to connect to my wireless network.
  I get the following error;
  The network password needs to be 40bits or 104bits depending on your network configuration.  This can be entered as 5 or 13 ascii or 26 hexadecimal characters.

  I gave my father a new laptop computer this fall and he gave me one that had given him his friend... I've never worked with XP Pro...

  We have several other phones on this account wireless at home.

  You try to login with the wrong encryption method and you have this implemented extremely secure wireless network.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• Photosmart 6510 connect to the new computer with Windows 8

  I have a photosmart 6510 e - all in one printer series.  I just bought a new computer with Windows 8.  When I tried to connect my printer, an error message came up saying that I have to upgrade to Vista or Windows 7.  He does not Windows 8.  Is there a solution?

  Hello

  Download and install the latest version of the software Windows 8 below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108880-3&cc=us&DLC=en&LC=en&OS=4131&product=5058336&sw_lang=

  Shlomi

• I have problems connecting to the remote desktop on Windows Server 2008.

  I have many positions of work XP trying to connect to our servers to Server 2008 Remote Desktop, but get the message, "because of a security error, the client could not connect to the remote computer".

  When I check the version of remote desktop it uses, it is 5.2.3790 in program Files\Remote Desktop

  Now, if I go to Windows\System32, I find mstsc.exe and can connect to the same server perfectly.  But if I go to save the connection, RD is up to version 5.2.

  How can I remove the old version and just use the newest one?

  Thank you.

  Original title: a different version of the remote desktop

  Hi msenior,

  Thanks for posting your query in the Microsoft Community.

  Method-

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  We know if you need help. We will be happy to help you.

  Thank you.

• Problem on HP Pavilion dv7-6c90el with Windows 8 Pro x 64 on video card

  Good evening

  I just finished installing Windows 8 x 64 Win7 Pro, I could find all the drivers for my laptop, but I have problems with the video card settings.

  My laptop is a HP Pavilion dv7-6c90el with two graphics cards, one managed by the processor, because it seems to do, and the other is normally installed on the PC.

  The cards are read by Windows as:

  Unit 1: Intel HD Graphics 3000
  Unit 2: AMD Radeon HD 6700 m Series (Microsoft Corporation - WDDM v1.20)

  the problem lies in the fact that the device must be a supported per second, or disabled, as it will not be. AMD video card must be set to 1 and the intel 2. If I go to the "Device Manager" to disable the card intel Windows, it works as if he was absent any video card, also installed driver is not correct because the card is an AMD Radeon HD7690M XT, the problem is that even if I uninstall this driver then always comes back. I also tried to download AMD Catalyst in the latest version, but can't find the card. It's as if the windows are imposed only use the unit 1, which, however, I can not disable the BIOS, because there is no voice. I note that Windows 7 had no problem.

  I ask you to help me because I need the video card for my work performance.

  Fixed the link - please try again

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

• The audio volume with Windows XP Pro. Result of the SP3 distorted audio recorder?

  Hello.

  Is it me or don't drop result audio volume of my WAV in a Windows XP Pro update. SP3 sound recorder? Is this a bug in this program or something else?

  Also, does anyone know a good free audio program that will make lots more low audio volume in a bunch old WAV files? One is a pain in the abdomen end-to-end. :(

  Thank you in advance. :) Ant @ Ant links fed quality (http://aqfl.net) and The Ant Farm (http://antfarm.ma.cx).

  Audacity will do what you want - a good. Its freeware and is a full blown audio editor. You need to normalize your track and to use a negative value to reduce the volume.

  http://Audacity.sourceforge.NET/

  One thing though: If your wav file already has a built-in distortion (that is to say "clipping" - when some parts of the song go above 0 dbl and so distort) nothing you do will get rid of the break of the said.

  You can see this by looking at the waveform track in Audacity. Is there is no flat areas where there should be highs, and they are above 0dbl then your track is cut off and there is a high risk of distortion. Is there is no flat areas (only the peaks) then your track should be ok (as long as they are not above 0dbl) and you can 'normalize' it.

  Try Googling "normalize batch file" (or similar), you can find what you want.

  See you soon,.

  Denys

• Problems connecting to the local network with NAS

  So we have a private network to work. On this network we have implemented a Synology NAS. We are constantly backup of files, files, adding files, etc. updated excel... There is a lot of traffic on this subject. Recently it was kickoff of people with error messages like "Device name already in use. It could be a problem with just the NAS, but I think it might be a problem with the network or something that I could deal with different parameters. The problem occurs when there are a lot of people on the network, not necessarily work outside the SAR, which has a static IP address. Because of my ignorance of networks, I don't know what information to include to help describe the problem or put in place, so do not hesitate to ask!

  Any help would be greatly appreciated, more on only an opportunity to learn more about networking is also good!

  Hi Michael,

  • What operating system do you use?

  I suggest you to send your query to the TechNet Forum for better support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=Windows10ITPro

  Kind regards

• HP Laserjet 4350dtn-can not find the driver or install the right driver for Window 7 Pro or Windows XP Pro

  I was able to use a network 4250dtn printer, but can not connect another 4350dtn to computers with Windows 7 Pro or Windows XP Pro.

  I bought a new Lenovo desktop computer and it cannot find/install the correct driver for this printer refurbished.

  Help, please. Thank you. The Hoang

  Hello

  It's correspondence, that HP has HP Laserjet 4350dtn

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=412170&lang=en&lang=en&cc=us&cc=us

  See you soon.