Problem connecting to the Windows error reporting service

Similar Questions

• Getting error messgae"problem connecting to the Windows Error Reporting Service. Please try again later! "when you use the error report feature

  Original title: error report function

  When I use the error report feature a warning appears "problem connecting to the Windows Error Reporting Service. Please try again later! »

  It started some time ago and I have plenty of backup errors.

  Using W7

  Hi John,.

  I suggest running Disk Cleanup and selecting Remove all the Windows Error Reporting log files by selecting the checkbox and then click OK:
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
  Check if you are then able to start the Windows Error Reporting Service.

• Problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  Hello

  When I present reports of error and asks me to send additional information, I get the above error. I have read and tried all the solutions already asked for this problem except for the removal of error reports (because if I do that, how could they be downloaded for analysis?)

  Just to confirm, I have:
  Restarted with a clean Windows with only Microsoft services running and no boot entry and retried the upload.
  A ran the SFC system without any problems.
  Insured to the logs and alerts are allowed through the firewall and temporarily disabled my virus scanner traffic analysis

  The persistent questions seem to be Google Reader goes down, and several accidents related to my AMD video driver.

  Hope you can help.

  Hi Kyle,.

  Did you do any change in software of hardware on the computer before this problem?

  You can read the following steps and check if it works.

  Method 1:

  Check if error reporting is enabled.

  For do I suggest you check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

  a. click Start> type of search in the servicesbox, press enter > find windows error reporting service in the list of the list of services > right click , and then click Start.

  (b) also to run the service as Auto, please follow the steps below.

  c. right-click on the service from the list of windows error reporting services and then click Properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

  Note:

  The purge will remove the existing report but if the problem reappears to collect the reports again and you will be able to move forward with the process of reporting errors.

  Purge all existing reports by using the disk cleanup utility, and then see if you can send information to the server of problem reports.

  Refer to this help article.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  Please refer to Google Drive Known Issues, you can also ask your question in the support of Google using Google Drive question forums.

  For the problem with the AMD video driver, you can try to update the drivers for the latest on the manufacturer 's Web site and check if that helps.

  To know better the question you can always check the event viewer details related to the issue.

  With the event in the Event Viewer logs, you can get information about your hardware, software and components of the system and monitor the events of security on a local or remote computer. Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Please return to the State of the issue and also let us know in case you need assistance on issues related to Windows.

• Problem connecting to Windows Error Reporting Service

  Some reports may not be uploaded to the "Windows Error Reporting Service". Please try again later.

  How much later?

  Hi Bob,

  Welcome to the Microsoft community.

  According to the application, you experience problems connecting to the Windows Error Reporting Service.

  To help solve your problem better, could you give us the following information?

  1. Since when are you facing this problem?
  2. Do you receive an error message when you connect to the Windows Error Reporting Service?

  Method 1: check if Windows Error Reporting Service is started or not.

  1. click on start

  2. in the start search box, type Services

  3. click right on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Windows Error Reporting Service started Automatic\Manual.

  Also check the dependency services that are required for Windows Error Reporting Service to run.

  To verify that double-click the service, and click the Dependencies tab.

  Method 2: I suggest you run the checker system (SFC) analysis files and check if it helps.

  See the Microsoft support Article to start the scanning of the SFC.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Method 3: use the cleanup utility disk and check if it helps.

  See the Microsoft Help Article on how to perform a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  For any future reference.

  https://TechNet.Microsoft.com/en-us/library/bb490841.aspx

  Try these steps and let us know the results for assistance.

  Thank you

• Windows Error Reporting service not connected to the internet

  Since the center of the Action, when checking for Solutions is selected, the following error message is returned;

  Problem connecting to the Windows error reporting service.  Some of the reports can not be uploaded to the Windows error reporting service.  Please try again later.

  I had the same problem with Vista and now 7 does too.  Any ideas?  (I know that I'm connected to the internet, as I am posting this...)

  Hello Mr. Merritt,

  Welcome to the Microsoft Answers Forum!

  To solve the problem better, please let us know the details mentioned below.
  (a) if it works well before?
  (b) have you done with the latest changes on the computer?
  (c) is your computer connected to any domain?

  I suggest you to check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

  Click Start > type of search in the services box, press enter > find windows error reporting service in the list of the list of services > right click and then click Start.

  Also run the service as automatic, please follow the steps below.

  Right-click on the service from the list of windows error reporting services and then click on properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

  Also I suggest you to temporarily disable the security software and settings of the firewall and check if it helps you to solve the problem.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer                                                              
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• Windows Error Reporting service connection failed

  For some unknown reason to me, the Windows Error Reporting service has decided that it cannot send crash reports to Microsoft.

  

  I get the above error when I try to "Find a solution" review problem reports dialog. 'Try again later' does not work. I've tried several "recommended fixes' including digitization of system files corrupted, by ensuring that the WER service is running, and check firewall issues. Reports of incidents used to work, so I'm at a loss as to why this is happening. Can someone shed light on the possible cause?

  Hi BaradaNikto,

  Thanks for the reply.

  Before you repair your operating system, you can purge all existing reports by using the disk cleanup utility, and then see if you get the error.

  For the instructions, you can consult this article. Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  If this is not enough, please answer with the information asked Gerry C J Cornell , which will help us to solve the problem.

• What happens when you disable the service "Windows Error Reporting Service" in order to avoid an annoying and misleading popup error message?

  I kept getting annoying "authentication failure.  Please check your user name and password of the account '... xyz. "" error every 30 seconds. "

  I tried to restore my system and antivirus running - even to reinstall my anti-virus.  I deleted the accounts in question and kept still getting the error message.  Note, receive emails has never been a problem.

  I finally disabled the element of the system of "Windows Error Reporting Service" MS configuration and now the error pop ups have disappeared.  Is it correct to keep this function disabled?

  Thank you.

  To check the event logs, go to start / Control Panel / administrative tools / event handler.

  To achieve the reliability and performance monitor, go to start / search and type in reliability, and then double-click the program icon that appears.

  I hope this helps.  You can always check these sites periodically and do not need WER to warn you of a problem (even if it is perhaps faster) - you can check manually.  WER serves a purpose and he gives notification of a problem (which is good), but not in the circumstances that you knew.  This is a "nice to have" feature - not absolutely necessary.  We can try testing again to see if we can find the problem with WER if you're at it - or you can simply leave it off and make periodic checks of manual (decision is yours).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Error Reporting service stopped recording of events in the event log, and now when it spawns werfault.exe, the process consumes the CPU until he is killed.

  Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.

  Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):

  KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender

  KB980182 for IE 7

  I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.

  Has anyone else encountered this problem?

  Hi Wannknow,

  It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:

  Again, here are the instructions:

  1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).

  2. click on "System and Maintenance" and then click "problem reports and solution."

  3. click on change settings in the left panel of the problem reports and Solutions window.

  4. Select Advanced settings.  In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the

  Hope this helps,

  Steve <> Microsoft partner

• There was an error when you attempt to connect to the Windows Live Calendar service.

  I get this message when trying to update my calendar:

  There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

  What can I do to fix this?

  Hello Maurizo Martino,

  As your question deals with Windows Live Calendar, there is a forum for Windows Live products.
  Please post in http://windowslivehelp.com/ under the category of Windows Live Mail.

  They will have experts in the Windows Live products that can better help you.

  Sincerely,

• "' Windows live mail error ' there was an error when you attempt to connect to the Windows Live Calendar service.

  Original title: when I start my windows live mail. He asks me if I want to go online? Then, I get this error message? just started doing this yesterday?

  There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

  I'm going to ask you to start your own, new topic in this forum now for Windows Live technicians can help you more-online http://answers.microsoft.com/en-us/windowslive/forum/livemail-calendar

  Tip: Include a link to this topic in your very first post so that Windows Live people know so much about your computer like I do.

  Good luck - I think that you're going to need!

• Unable to connect to the Windows Live Calendar service

  get error message: there was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

  No upgrade to Windows Live Mail available.  Have uninstalled & reinstalled. Task manager services wlcrasvc is stopped.

  Any suggestion how to solve?

  Hello

  This forum deals with aspects of electronic mail on your computer network.

  If the problem related to the Live mail Server, or configure the features of the software, you'll do better by logging and displaying the question on Live Mail support forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Forum Windows Live,

  Windows Live Mail Forum
   
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Problem connecting to the server, error connection server and printer offline. I have a HP photosmart printer and Windows 7?

  My printer is not printing. It say problem connecting to the server, connection error server and printer offline. I have a HP photosmart printer and windows 7.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Failed to connect to the Windows and WLM service does not

  Hi, I hope someone can help me.  When I turn on my laptop the message "unable to connect to a Windows service.  Windows could not connect to the Group Policy Client Service... "That would be the reason I can access is no longer my Windows Live Mail 2011?  I hope you can help, I did no progress so far with someone or something...  Thank you I have upgraded from Windows 7 to Windows 10 a few weeks ago.

  Hello Richard,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  For the Customer Service of Group Policy error, please refer to the suggestions of P.L.X. responded on February 2, 2013 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-wont-Windows-connect-to-the-Group-Policy/b73107f8-8447-4599-87a5-65ecc6a63aa0

  For cause of Windows live mail , I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows Live Mail stops responding or does not start after the installation of KB2454826
  https://support.Microsoft.com/en-us/KB/2505524

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problems with Windows Error Reporting

  I have Vista Home Prmium with SP2 on a dual processor computer heart. wermgr.exe is running in the background and when he does he can linger around for awhile while using 50% of my CPU all the time. He passes in and out the Task Manager, so that the CPU usage is constantly bounce up and down. I tried to disable the windows error reporting service, but it does not work. I read it could be a problem with 2007, but Office and this race Diagnostics would take care of the problem... but the diagnosis has not found a problem. Does anyone have an idea what I can do to fix this? Or y at - it a way to really disable the error reporting service?

  Thank you

  Here's how to disable Windows error reporting in Vista: http://www.howtogeek.com/howto/7863/disable-error-reporting-in-xp-vista-and-windows-7/; However, it is not recommended because it can be a useful tool if you are having problems.  That "s your decision to make.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the parameters of Windows error report

  I deleted the windows error report schedule settings in the scheduling of the task. does anyone have the settings? screenshots would be useful. I have no idea how to create from scratch. Help...

  using Vista Home premium

  If you delete a report of events in Event Viewer you cannot restore unless you saved it first. You have to re-create the task.