problem connecting to Vista... blackscreen with the pointer of the mouse only...

Similar Questions

• Problems connecting to 10g DB with the form builder

  Hey!
  I'm down low, and I am a student of ICT of the low countries. I am currently working on an assignment I need to build forms.
  
  Now, I installed Oracle 10 g DB Express edition, but I can't seem to connect to my DB. I think it's a naming problem, but I don't know what the name could be except "XE" because that's what he says in "Home > Administration > on the database ' NAME: XE :)
  
  While trying to create a form master / detail (with the wizard of data block), I was required to connect to the DB once I clicked on browse to the Table or view. I entered my login and password and registrant "XE" as database. I got the following error: "ORA-12154: TNS: could not resolve the connect identifier specified." Now I guess it's a problem with my name in the database because I tried to run the DB, but he pointed out that it was already running. Any ideas?
  
  I'm kind new to work with databases in this way and this assignment should be made as soon as possible - and my knowledge of Oracle Forms leaves to be desired in general - so any help would be greatly appreciated!
  
  Thanks in advance,
  
  Bottom

  Assuming Forms version 10 g, in the database field enter ""/xe "."

• Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

  Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

  Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

  I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

  It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

  Thanks in advance for your suggestions!

  I will proceed to a re - install now, thanks anyway for your efforts

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

  I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

  So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

  A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

  Thank you.

  It will not work. And where did you read that the keyboard works wired with a Mac?

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• having problems connecting to some websites with spa3102

  Hello

  I have problems connecting to some websites with spa 3102.

  The error message I get is as follows.

  The connection was reset

  The connection to the server was reset while the page is loading.

  * The site may be temporarily unavailable or too busy. Try again in a few
  moments.

  * If you are unable to load any pages, check your computer's network
  connection.

  * If your computer or network is protected by a firewall or proxy, make sure that
  that Firefox is permitted to access the Web.

  When I connect to my ISP modem directrly, so I'm able to connect to these Web sites.

  Any ideas?

  I already had the latest firmware (software Version: 5.1.10 (GW))

  But I think the problem is now resolved. Sites that I couldn't visit were my suppliers Web hosting and my own domain. Previously, I had activated attacking and that my hoster somehow registeren my mac address.

  Here are the settings that I had to change the spa3102.

  MAC Clone settings
  The Service Enable MAC Clone: Yes cloned MAC address: xxxxxxxxxxxx

  thx for your help.

• Start Windows vista, nothing on the screen, only the pointer of the mouse

  I have a gateway desktop vista, nothing on the screen, only the pointer of the mouse
  I used the recovery tools nothing fixs

  Hello

  "I used the recovery tools nothing fixs.

  It helps us if you tell us what they were.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If necessary, here's how to reinstall back to new condition.

  "Gateway Recovery Center in Windows Vista® '

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read these options to the gateway address:

  Gateway System Recovery from the hard - the following are methods to recover or repair the computer using the recovery of hard drive partition.

  • Complete recovery plant
  • Restoration with automatic data backup
  • Windows recovery environment

  See you soon.

• Open submenus when I stop on them with the mouse pointer does not work

  I used to use Vista Upgrade of XP until it hit the big time. With this installation, the option 'Open submenus when I dwell on them with the mouse pointer' worked perfectly well.  Since I did a format and installed the full installation of Vista version, and now this feature does not work. I checked and re-checked the option in the customization of the menu star and nothing. Also unable to find what anyone at the mouse settings itself.

  Does anyone know how to get this feature to work again once it's something I use a lot.

  Concerning

  Owen

  Hello

  If none of these help or you find a solution please report.

  Does work here on Vista either, but I don't want it works even if it is checked.

  Try UnChecking the start - Customize - Menu tab apply / OK and then go back and save
  Apply / OK.

  If no joy this initiative will eventually.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Maybe something here: [check Control Panel - mouse or TouchPad (as applicable)]

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Network problem between Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Original title: network problem!

  How can I get my laptop with Windows 7 Home Edition to connect to my desktop with Windows XP on it. I have a router Linksys WRT54 plugged directly to the desktop via ethernet and my laptop has an excellent signal but I can't access programs or the printer with it. I know the 'host group' on 7 but XP isn't that. Are there alternative than to put 7 on my desktop? Any suggestions?

  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  According the description of the problem face you connection problems in Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Residential group option is available on Windows 7 and Windows 8 operating systems. However, you can see the following article for more information on the connection of Windows 7 and Windows XP computers:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• WIN8 - no desktop, black screen with the mouse pointer. Manager tasks and the login screen work.

  As usual I left my computer and after a few minutes, he fell asleep. Next morning, I had moved to the mouse, computer wakes, but I got a black screen with the mouse pointer. I hit CTRL + Alt + Delete and screen with Task Manager option appeared. I stop computer and rebooted. Welcome screen and logon is displayed. After you enter the password and click on submit that the screen becomes black with only the pointer visible mouse. I don't have not installed anything recently. Can you help me find my office?

  OK, I had the same problem. I thought that if you have a pointer and can launch Manager tasks and all programs through its file > new task, then the hull works correctly. No office and no taskbar mean that something is wrong with explorer.exe. Now, he has corrupted not necessarily, may not properly launched.

  Here's what I did:

  1. I opened the Task Manager, the Details tab

  2. I killed all explorer.exe on the list

  3. just to be safe, I also tried to kill dwm.exe but it will be may not be necessary (it never goes away)

  4. I started the new instance of explorer.exe via file > run

  And voila, I had the desktop and the taskbar.

  It will be useful.

• Problem with mouse input Manager with the mouse button

  Hello
  
  I'm trying different things to determine weather conditions, I'm going to use JavaFX for one of my projects. Here's one of my problems. I had a scene with only a circle inside. I want to run an event that would be returned when I press the left button of the mouse outside of the circle, then enter the circle with the mouse and the button is held down. However, it seems that the mouse gesture events are blocked when you press a button.
  
  Does anyone have a solution to my problem?
  
  Thank you.

  Hello

  You're right, the "MouseMove" and "mouse entered" events seem to no longer be fired when a drag is in progress. A little annoying, but perhaps also by design.

  Drag mouse events on the other hand get programming at this point so you can use them for what you want. It seems THAT JFX suppose the node where the drag started is the one who cares for the event if you don't get the events drag on the circle directly. So the simple way only I can see for this is follow slide it the mouse on the "outer" and then detect what child was wriggling on manually. Something like this:

  final FlowPane rootNode = new FlowPane();
  rootNode.setOnMouseDragged(new EventHandler()
  {
      public void handle(MouseEvent mouseEvent)
      {
          System.out.println("Mouse dragged on root pane to " + mouseEvent.getX() + ", " + mouseEvent.getY());
          for (Node child : rootNode.getChildren())
          {
              if (child.getBoundsInParent().contains(mouseEvent.getX(), mouseEvent.getY()))
              {
                  System.out.println("Mouse is now over: " + child);
              }
          }
      }
  });
  
  Circle circle = new Circle(50);
  rootNode.getChildren().add(circle);
  

  Is not ideal, but it should work.

  Default you can also play with the stuff of Drag and Drop: http://download.oracle.com/javafx/2.0/drag_drop/jfxpub-drag_drop.htm

  In what you can do what you ask, but you will need to do a little more work to play nice with the larger world of DND. Start with something like this but:

  final FlowPane rootNode = new FlowPane();
  rootNode.setOnDragDetected(new EventHandler()
  {
      public void handle(MouseEvent mouseEvent)
      {
          System.out.println("Drag started on root node");
          Dragboard db = rootNode.startDragAndDrop(TransferMode.ANY);
          ClipboardContent content = new ClipboardContent();
          content.putString("Test");
          db.setContent(content);
          mouseEvent.consume();
      }
  });
  
  Circle circle = new Circle(50);
  circle.setOnDragEntered(new EventHandler()
  {
      public void handle(DragEvent dragEvent)
      {
          System.out.println("Drag entered on circle");
      }
  });
  rootNode.getChildren().add(circle);
  

  There may be other ways too, but that's what I found.

  Hope that helps,
  zonski

• Dragging points in the chart with the mouse

  Hello

  I would like to ask if any Graph control NOR for .net enables drag and shift the points on the graph with the mouse.

  Here's the simple example to describe what I'm thinking:

  

  If there is no such functionality, can be implemented and if it cannot, in such a way?

  a.h.

  Hello

  It seems that you may be heading in a different direction, but I thought I would offer my 2 cents.  One possibility would be to update the point in the data table based on the position of the mouse in the MouseMove callback and replot then data.  Although it may not fully satisfy all your needs, below is a simple example of how to proceed.  If all goes well, it may be of some use to you.

  partial class Form1: Form
  {
  xData private Double [] = {2, 4, 7, 8, 5, 4, 2};
  Private Double [] yData = {5, 8, 9, 6, 3, 2, 5};

  private int pointIndex;

  public Form1()
  {
  InitializeComponent();
  }

  private void Form1_Load (object sender, EventArgs e)
  {
  scatterGraph1.PlotXY (xData, yData);
  }

  Private Sub scatterGraph1_MouseDown (ByVal sender As Object, MouseEventArgs e)
  {
  xPoint double;
  Double yPoint;

  scatterPlot1.InverseMapDataPoint (scatterGraph1.Bounds, Object, out xPoint, out yPoint);
  This XYCursor is transparent in color and it is
  SnapMode has the NearestPoint value
  xyCursor1.MoveCursor (xPoint, yPoint);
  Cursor.Current = Cursors.Hand;
  }

  private void scatterGraph1_AfterMoveCursor (object sender, NationalInstruments.UI.AfterMoveXYCursorEventArgs e)
  {
  pointIndex = xyCursor1.GetCurrentIndex ();
  }

  Private Sub scatterGraph1_MouseMove (ByVal sender As Object, MouseEventArgs e)
  {
  xPoint double;
  Double yPoint;

  If (get_Cursor is Cursors.Hand)
  {
  scatterPlot1.InverseMapDataPoint (scatterGraph1.Bounds, Object, out xPoint, out yPoint);
  xData [pointIndex] = xPoint;
  yData [pointIndex] = yPoint;
  scatterGraph1.PlotXY (xData, yData);
  }
  }

  Private Sub scatterGraph1_MouseUp (ByVal sender As Object, MouseEventArgs e)
  {
  Cursor.Current = Cursors.Default;
  }
  }

  NickB

  National Instruments

• Problems with the mouse.

  On my Acer desktop / laptop, I can't remember the serial number or anything like that, but there is a touchpad mouse which I never use. I have a USB key with a "mouse in hand" that I use.

  Saturday evening closed pc cause lack of power. Sunday morning I gave him power, and he began.

  But when you go to the screen "" with applications (windows 8.1) started at the right end. Trying to get to the left of the screen I could do with the USB mouse, but when I left hand letting it got automatically to the right again.

  It's lying, that I could not work with applications to the left (or go to the app store or anything.)

  I tried "Control Panel" and click on "programs". All programs has been more than on a single screen.  And I started at the bottom. Try it with the mouse or the "arrow" s goes up, when I let go I come down to the bottom again.

  Anyone here know if mice "touchpad" do something bad?  Or a USB mouse?  Or a sick computer?

  Sorry for my English - computer is English not my best. Hope someone out there can understand and solve my problem.

  PC was purchased June 2014, so I have the warranty, but do not miss my computer for a long time :-)

  Greetings to all

  Peter

  It was my logitech mouse that didn't work

  Bought a new and now all works

  :-)

  Peter

• OS boots to a white screen with the pointer of the mouse only

  doesn't show any desktop computer

  
  BONES appears at startup but without bars, icons or background when you are finished. Displays only the white screen with the mouse pointer. Even in safe mode unless there is safe mode in each of the 4 corners of the display discription and windows at top-center

  tablerock,
  Try the items listed on this thread.
  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 907: This connection cannot be used with the VZAccess Manager

  original title: error message appear on my screen

  I get this error message appear on my screen every two seconds:
  "This connection cannot be used with the VZAccess Manager.

  Error 907 "

  Hello

  Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.

  Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org