Problem connecting Windows _

Similar Questions

• Problem connecting Windows Developer Preview

  Recently I have just installed Windows Developer Preview successfully but I can't on the desktop.  The main problem is that I can not connect my internet to the network because I have to manually set the IP address(TCP/IPv4) then only I can connect to the network. I have no idea how to create the new user account for Windows 8, I tried to connect using the administrator account, but he said "this account has been disable. I have install Windows 8 in a separate partition so that I can dual boot with Windows 7.

  Sorry for my bad EngRish... :)

  Hello

  We are pleased to know that the problem has been resolved. If you have any further questions on your computer with respect to Windows, please post your question in the link given for assistance.

  Windows Developer Preview: OS General questions

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

   

• Problem connection Windows XP

  When I try to sign Windows, I turned off previous alert because of thermal events, I must by pressing F1, then after about 20 trys< i="" can="" sign="" on="" in="" safe="" mode="" as="" administrator.="" i="" restart="" and="" can="" sign="" on="" on="" my="" account.="" as="" soon="" as="" i="" go="" on-line="" windows="" shuts="" down="" and="" i="" have="" to="" start="" all="" over="" again.="" have="" tried="" reset="" to="" earlier="" date-="" no="" luck.="" have="" run="" microsoft="" virus="" scan="" -="" no="" luck.="" any="" suggestions?="" also="" when="" i="" get="" my="" windows="" page,="" i="" get="" error ="" im32fax.dil="" not="" found="" .="" don't="" know="" what="" that="" is="" either.="" thanks="" for="" any="" help="">

  The cooling system of your PC is almost certainly needs clean up. Probably done better professionally, ideally the place that you can get a recommendation for, especially if it's a laptop. It is possible that you could get wrong thermal events triggered by a faulty hardware.

  Regarding the "IM32FAX. DIL not found", it is probably related to a previous device printer or fax machine not properly uninstalled. I doubt that you will be able to address it until you fix the cause of your thermal events.

  Tricky

• Problem connecting Windows 7 Home Premium

  I'm having a problem with my computer: when booting, it goes to a screen to login to an account named "HomeGroupUser$".  I tried going to manage groups of users to delete, but it shows up here, just my (Administrator) account and the guest account, where the power is off.  I googled this problem, but all the shots suggest to delete the account. As indicated, I can't delete the account.  I do not know the password for this account, because I am sure that I never created the account.  I tried the homegroup password, and that did not work.  I don't have a password set on my account, as I am the only one who uses my computer.

  Can someone help me with this please?

  Thank you!

  I was able to delete the account.

  I have typed in netplwiz, check mark the box "Users must use a username and password to use this computer", deleted the account of $ HomeGroupUser, unchecked the box and saved the changes.  Restarted, and it went straight to my office as it should.

  I'm just curious to know how the account was created, and why the computer has chosen this account start instead of my account.

  Thanks to all for your responses.

• problems connecting to Windows mail

  Just received a wireless, Internet connection is fine.  Unable to connect to Windows mail - error message - failed to connect to the server. Account: ' pop - server.neo.rr.com', server: ' pop - server.neo.rr.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  Hi Becky,

  For you help I would be grateful if you could answer the following question:

  What operating system is installed on the computer?

  This could be due to the problem of Windows Mail settings; I suggest you to check incoming and outgoing, settings

  Method 1:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-in/Windows-Vista/working-with-Windows-Mail

  Method 2: Temporary deactivation of the antivirus/firewall software and

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows-Vista/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Check out the link;

  Windows Mail and Windows Live Mail error codes

  http://support.Microsoft.com/kb/942495

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player

  Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.

  HI Maria,

  If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations.  Once done, do the same for LNK entry.  This should restore your programs and get the Internet icon to go to the internet rather than WMP.  If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.

  If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.

  I hope this helps.

  Good luck!

• Everyone around the Malaysia has problems connecting to Windows Update Server?

  For 4 days, I have the problem using Windows Update. Updates is never to download completely, Windows Update will just stop after failing to download the updates.

  Then I tried to download updates and apply them manually; VS2008SP1ENUX1512962. ISO (Visual Studio 2008 Sp1) is one of the things that I download. This 800 + MB file I've downloaded 3 times on the Microsoft Download site and they are all corrupt. I got a copy uncorrupted file using torrent finally. There are others who are corrupt as well.

  That's why I'm thinking, is there something wrong with the server of Microsoft Update, or the Malaysia connectivity problem? I'm getting an average of 100 Kbps download speed of site except Windows Update - which starts at 30 kbps and after 15 minutes drops to 5 Kbps.

  Hello Siang Hong,

  Thank you for using Microsoft Vista answers Forum!

  What is the address of Web site, that you try to download the update?  Looks like you may have an infection of viruses or malware on your PC. Just to be on the safe side, I would say that you follow the steps in these links barely pull on this issue.

  How to remove a computer virus?

  How to get rid of malware

   

  If the above does not apply to you, thanks for posting back with some details about your network settings so that we can be able to help more on your connection problem.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• problems connecting monitor to display windows xp

  I'm having a hard time getting my computer to connect to a monitor or projector.  When connected to a monitor, audio works fine, but the video shows that the static image of my desktop wallpaper.  I hear that I am currently running programs, but I can't see on the screen of the monitor.  The computer is running Windows XP.  I fiddled with color, screen resolution, refresh rate, and nothing changes.  I know the monitor works because my other computer that is running Windows Vista, works fine with it.  Suggestions?  The computer has an Intel Graphics Media Accelerator reader for mobile.

  Hello

  Check if the computer matches that of material for multiple monitors, you can check the link below: hardware configuration required for the display Support in Windows XP: http://support.microsoft.com/kb/296538

  You can also access the links below: how to configure and use multiple monitors in Windows XP: http://support.microsoft.com/kb/307873

  Resources for troubleshooting problems in Windows XP: http://support.microsoft.com/kb/307960

• Problem connecting to Windows Error Reporting Service

  Some reports may not be uploaded to the "Windows Error Reporting Service". Please try again later.

  How much later?

  Hi Bob,

  Welcome to the Microsoft community.

  According to the application, you experience problems connecting to the Windows Error Reporting Service.

  To help solve your problem better, could you give us the following information?

  1. Since when are you facing this problem?
  2. Do you receive an error message when you connect to the Windows Error Reporting Service?

  Method 1: check if Windows Error Reporting Service is started or not.

  1. click on start

  2. in the start search box, type Services

  3. click right on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Windows Error Reporting Service started Automatic\Manual.

  Also check the dependency services that are required for Windows Error Reporting Service to run.

  To verify that double-click the service, and click the Dependencies tab.

  Method 2: I suggest you run the checker system (SFC) analysis files and check if it helps.

  See the Microsoft support Article to start the scanning of the SFC.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Method 3: use the cleanup utility disk and check if it helps.

  See the Microsoft Help Article on how to perform a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  For any future reference.

  https://TechNet.Microsoft.com/en-us/library/bb490841.aspx

  Try these steps and let us know the results for assistance.

  Thank you

• Problem connecting to the Windows error reporting service

  Whenever I try to check for solutions in the Windows 7 Action Center, I get the following error message: problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  This problem began to appear a few days ago, even if I did not any changes to my computer. I do not have any firewall (with the exception of the default Windows Firewall) and all my other programs work very well on the Internet.

  Any ideas what could cause the problem?

  Problem solved.

  I actually had to purge all existing reports by using the disk cleanup utility.

• Problems connection Canon SX280 WiFi for Windows 7 (64-bit)

  I hope someone can help me.

  I recently bought a Canon SX280HS that has possibilities of wifi, and I'm having a problem connecting to my laptop.     I use a laptop Dell Inspiron N7110 running Windows 7 (64-bit).   It connects to the internet and a printer wireless via a pretty new without and problems at all Netgear wifi router.    This laptop also has Intel (R) My Wifi Technology, and I can access the utility to it via the control panel.

  After installing wifi set up the software provided with the camera, I first tried to connect the camera via the Netgear router.   After putting in the correct encryption key (I did this many, many times), he search the device, but it is never and eventually times out with a "communication error" and "device not found."

  I was ready to return the camera to Amazon...

  But then I tried to connect the camera using the Intel(r) my Wifi utility.   I activated the technology, put in the correct encryption key, and the cannon appears on the users list, showing its MAC address and a wifi signal strong.   The camera then sees the name of my Dell laptop, but when I try to connect it, all I get is 'connection '.  Finally, it ends with a "communication error" and "connection failed."

  At this point, I find the wifi on the camera works properly because it clearly links to the Intel(r) my Wifi on my laptop.

  Can someone tell me how to configure my laptop to allow the rest of the connection?     Oh, I tried this many times with my anti-virus IT and OFF and my firewall ON and OFF, and it does make a difference.

  Thanks for your help.

  Had the same problem with the same device under Windows. For me, I fixed it by going to control panel > network and sharing Center > view network computers and devices (this, while the camera tries to connect to your PC. I then click with the right button on my camera icon and click "install". Also, make sure that 'file and printer sharing' are on (my PC actually invited this). Don't know if this will help, but worked for me. Can now import wireless!

  All the best,

• Problem connecting to internet wireless (Hp elitebook 8440p, windows 7 Professional)

  Hello

  So this problem seems to be quite common, but in a different way. I read a lot of forums where users when it is unable to turn on their wireless option (via the button on the keyboard) However, I turn it works freely. I have full access to the internet with an ethernet cable, but am unable to connect to wireless networks. I'm a student and my University offers wifi to all buildings of the University, but even though I can access this wifi on my laptop, I can't on my laptop.

  I know almost nothing about network connections and Internet / network adapters so I'm sorry if this is a silly question. Please let me know if there is anything I can do to connect to wireless networks.

  Thank you
  Tom Rowland

  Hello Tom,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt network drivers.

  I suggest you to launch network troubleshooting and check if that helps.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, follow the steps provided in this article, and the check.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem on Windows 7 computer network connectivity

  The desktop of Windows 7 ether net connected, I had selective network problems. I was unable to access the Web sites, but had no problem to update software and connections to the game servers. I ran antivirus and optimizer software to solve the problem, but I think they may have removed some crucial programs for networking.  Now, I am unable to access the Internet related services all via ether net.

  I tried to reinstall the driver for network card to the motherboard. Among network cards, the teredo tunneling adapter displays an error titled code 10. I tried the REGEDIT fix and reinstall the driver.  None of these solutions so far have worked.

  I'm not sure whether the mistake of teredo is the cause, but it seems like a common problem. Anyone know how I might be able to solve this problem?

  Original title: network connectivity problem

  Hello

  Thanks for the reply.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the computer?

  2. that you get an error message when you connect to the Internet? If Yes, what is the full error message?

  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See the article for more information.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problem connecting via Windows Remote Assistant

  I have a problem connecting to my PC mother via Windows remote assistant. I checked the setting and services run. I get the following error:

  Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not	Detected
  Contact your network administrator or ISP (ISP) Completed
  Could not establish a Remote Assistance connection

  
  Could not establish a Remote Assistance connection Detected

  There is no problems detected on this computer

  Completed

  Problems found	Details of detection
  6 Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Detected
  Contact your network administrator or ISP (ISP) Completed Windows cannot communicate with the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854). The computer or the service that you want to achieve may be temporarily unavailable. If the device or resource is nearby and you have access, make sure that it is turned on and connected to the network.

  6 Could not establish a Remote Assistance connection Detected
  There is no problems detected on this computer Completed There could be a problem on the computer that you are trying to connect to. If the person you help running Windows 7, ask them to click Troubleshooting in the Remote Assistance program. If they run older versions of Windows, you can ask them to use the Internet connectivity evaluation tool from the Microsoft Web site.
  Details of detection

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:

  
   
  Settings for Teredo
  ---------------------------------------------
  Type: customer
  Server name: teredo.ipv6.microsoft.com.
  Client refresh interval: 30 seconds
  Client port: not specified
  State: qualified
  Type of customer: teredo client
  Network: unmanaged
  NAT: restricted
  Special behavior NAT: UPNP: no PortPreserving: Yes
  Local mapping: 192.168.1.7:57043
  External NAT mapping: 69.248.92.196:57043

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:   Settings for Teredo --------------------------------------------- Type: customer Server name: teredo.ipv6.microsoft.com. Client refresh interval: 30 seconds Client port: not specified State: qualified Type of customer: teredo client Network: unmanaged NAT: restricted Special behavior NAT: UPNP: no PortPreserving: Yes Local mapping: 192.168.1.7:57043 External NAT mapping: 69.248.92.196:57043

  Network Diagnostics log

  Name of the file: 398A911D-DDA8-41E3-9FF3-4E36B200143B. Diagnose.Admin.0.etl

  Other newspapers and Network Configuration

  Name of the file: NetworkConfiguration.cab

  Computer name:	USER-PC
  Version of Windows:	6.1
  Architecture:	AMD64
  Time:	Friday, May 16, 2014 14:31:02
  Publisher details

  Detecting network connectivity problems.
  Package version:	1.0
  Publisher:	Microsoft Windows

  Keep in mind that if the person seeking assistance uses a router (instead of connecting directly to the modem), then you will need to redirect port configuration.  The request when she sends uses the IP address of his computer, but that the IP is not always accessible to the public.  For example, IP address of my PC is 192.168.0.4 (the 4th computer on my network at the present time), and this address cannot be used to connect to my PC.  You know my public IP address, so, I need the configuration of port forwarding to direct your incoming connection to my public address during my internal IP address (called traversal NAT, or network address translation).

  There is a reason, I generally recommend free tools that use HTTP transport instead, like Team Viewer app free (for personal use).