Problem connecting with LinkedIn

Similar Questions

• HP Pavilion Notebook-15-p108tx: problem connecting with specific programs

  Hi, I had problems connecting with specific programs recently. I'm still able to communicate online through web browsers. Mozilla Firefox works fine, but Google Chrome still has some problems loading of specific pages or they don't load at all. The main programs I am having difficulties with are mainly games platform programs like Steam, Battle.net, and League of Legends, and I'm unable to go online or to connect to their servers.

  I never had no problem connecting like these last two years that I've owned my laptop, until recently. I think it was the 6th or 7th of may these problems started.

  I updated my drivers and was constantly check to download the most recent. I don't know if it's my internet provider, but I was also constantly check the State of the network to ensure that the services are very good.

  If anyone else has this problem and if there are any suggestions that you think could help solve this problem, it would be appreciated.

  Thank you

  Jasper

  Hi Jasper,.

  Thank you for the update. I think that your computer have a rootkit infection. Most of them were inside of the Chrome Extensions.

  Here's what you need to do.

  Open chrome

  Click on the Menu bar in the upper right

  Click more tools

  Click Extensions

  Please search for suspicious extensions that does not belong to the computer, especially ads. Once you identified, simply click the trash can icon then Chrome close then reopen it again to see if you can connect to your desired game. If this isn't the case, then proceed as follows.

  Manual removal of suspicious files (if you are uncomfortable with it. If this is not the case, then run System Restore from safe mode with command prompt)

  Manual removal (I miss the old days of MS virus removal )

  Go to RUN type %temp% , and then delete all folders by pressing SHIFT + DELETE

  Go to Control Panel and then locate all the apps that you think a form of ads

  Go to safe mode with network. Run Malwarebytes in that State

  Then run Tweaking tool to fix everything that has changed since your computer

  http://www.Tweaking.com/files/setups/Tweaking.com_windows_repair_aio_setup.exe

  If your not comfortable with the troubleshooting steps may perform the system restore on the day, it was working fine.

• I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine.

  I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine. Can someone help me with this?

  Hello

  Please try the steps in the following thread

  I have problems connecting to Business Catalyst Muse.  When I try to publish, I get a message saying his time trying to connect with my Adobe ID - and check the network connections.  All of my connections are very good... Muse is connected to my Adobe

• Problem / connection with the client to view

  Our assessment notice.

  View Manager: 4.0.1 build-233023

  Discover the composer: 2.0.0.210930

  Reviews: 4.0.1 build 2029

  So far so good. We have created a dynamic office and were able to deploy desktop computers. We use an ad group to allow users to this pool.

  To access desktop computers in this pool via the web portal is no problem, but when the same user attempts to use the Client to view we get a message that authentication has failed. In the View Manager events, I got these messages:

  1 (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) XXXX\YYYYYYYY: 18B0AC59A9A16F3F0158209FC1CC26) the user USER; USERSID:S - 1-5-21-nnnnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int; has disconnected from VDM

  2. (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) BROKER_LOGOFF: USER: 18B0AC59A9A16F3F0158209FC1CC26 XXXX\YYYYYYYYY); USERSID:S - 1-5-21-nnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int;

  The strange thing is, I left all this next door for a few minutes and tried to connect via Client discovered again later. This time, it worked, but at the opening of the session of office (office of screen already appeard) closes the windows desktop without any message. After you start the Client view again, the authentication will fail again.

  Time is synchronized in all entities.

  Any ideas, tips, solutions?

  
  AWo
  
  VCP 3 & 4
  
  \[:o]===\[o:]
  
  = You want to have this ad as a ringtone on your mobile phone? =
  

  = Send 'Assignment' to 911 for only $999999,99! =

  What ESX version are you running?  They had the 4.0 update number 2 with PCOIP, http://kb.vmware.com/kb/1022830.

  The opening of autologon, I guess that we refer to log in as current user box?    I have seen issues where if I leave my PC to the top and running for long periods of time it fails, but a simple reboot fixes this problem.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Connection with the Apple ID server problem

  iCloud on my ASUS ZENBOOK can not connect.  It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.

  My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.

  Key points:

  (1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10.  (Confirms that it is not a problem of "User" with me trying to use the wrong password).

  (2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.

  (3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia).  [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].

  (4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.

  (5) I uninstalled iCloudand reinstalled from a new download.  Did not help.

  (6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers.  I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.

  Suggestions as to best 'next steps', I can take would be highly appreciated...

  I have exactly the same problem... is there any help for us?

  So far, I've been forced to use Windows 7

• Error message when connecting with wireless USB modem

  Dear Sir/Madam,

  I use the HP laptop with Windows vista operating system. I'm also using the USB wireless modem. But now, I had problem connecting with usb modem. I get ((erreur (6): could not get the string) message connecting with.) Kindly help me to solve the problem.

  Thank you
  Kind regards
  D.Yokesh

  Hi D.Yokesh,

  1. did you of recent changes on the system?

  If it is a recent issue, then you can try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Problems connecting to help connect any and the Ipsec VPN Client

  I have problems connecting with the VPN client connect no matter what.  I can connect with the Ipsec VPN client in Windows 7 32 bit.

  Here is my latest config running.

  Thank you for taking the time to read this.

  passwd encrypted W/KqlBn3sSTvaD0T

  no names

  name 192.168.1.117 kylewooddesk kyle description

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  boot system Disk0: / asa822 - k8.bin

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  domain wood.local

  permit same-security-traffic intra-interface

  object-group service rdp tcp

  access rdp Description

  EQ port 3389 object

  outside_access_in list extended access permit tcp any interface outside eq 3389

  outside_access_in list extended access permit tcp any interface outside eq 8080

  outside_access_in list extended access permit tcp any interface outside eq 3334

  outside_access_in to access extended list ip 192.168.5.0 allow 255.255.255.240 192.168.1.0 255.255.255.0

  woodgroup_splitTunnelAcl list standard access allowed host 192.168.1.117

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  outside_access_in_1 list extended access permit tcp any host 192.168.1.117 eq 3389

  woodgroup_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  inside_nat0_outbound_1 to access extended list ip 192.168.5.0 allow 255.255.255.240 all

  inside_test list extended access permit icmp any host 192.168.1.117

  no pager

  Enable logging

  timestamp of the record

  asdm of logging of information

  Debugging trace record

  Within 1500 MTU

  Outside 1500 MTU

  mask pool local Kyle 192.168.5.1 - 192.168.5.10 IP 255.255.255.0

  IP local pool vpnpool 192.168.1.220 - 192.168.1.230

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 631.bin

  don't allow no asdm history

  ARP timeout 14400

  Global (inside) 1 interface

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound_1

  NAT (inside) 1 0.0.0.0 0.0.0.0

  public static interface 3389 (indoor, outdoor) 192.168.1.117 tcp 3389 netmask 255.255.255.255 dns

  public static tcp (indoor, outdoor) interface 8080 192.168.1.117 8080 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 3334 192.168.1.86 3334 netmask 255.255.255.255

  static (inside, upside down) 75.65.238.40 192.168.1.117 netmask 255.255.255.255

  Access-group outside_access_in in interface outside

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  the files enable exploration

  activate the entry in the file

  enable http proxy

  Enable URL-entry

  SVC request no svc default

  AAA authentication http LOCAL console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet 192.168.1.0 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd dns 8.8.8.8 8.8.4.4

  dhcpd lease 3000

  !

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd allow inside

  !

  a basic threat threat detection

  host of statistical threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image

  enable SVC

  internal sslwood group policy

  attributes of the strategy of group sslwood

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  internal group woodgroup strategy

  woodgroup group policy attributes

  value of server DNS 8.8.8.8 8.8.4.4

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list woodgroup_splitTunnelAcl_1

  mrkylewood encrypted Q4339wmn1ourxj9X privilege 15 password username

  username mrkylewood attributes

  VPN-group-policy sslwood

  VPN - connections 3

  VPN-tunnel-Protocol svc webvpn

  value of group-lock sslwood

  WebVPN

  SVC request no webvpn default

  tunnel-group woodgroup type remote access

  tunnel-group woodgroup General attributes

  address pool Kyle

  Group Policy - by default-woodgroup

  tunnel-group woodgroup ipsec-attributes

  pre-shared key *.

  type tunnel-group sslwood remote access

  tunnel-group sslwood General-attributes

  address pool Kyle

  authentication-server-group (inside) LOCAL

  authentication-server-group (outside LOCAL)

  Group Policy - by default-sslwood

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  Review the ip options

  type of policy-card inspect dns MY_DNS_INSPECT_MAP

  parameters

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  http https://tools.cisco.com/its/service/...es/DDCEService destination address

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:6fa8db79bcf695080cbdc1159b409360

  : end

  asawood (config) #.

  You also need to add the following:

  WebVPN

  tunnel-group-list activate

  output

  tunnel-group sslwood webvpn-attributes

  activation of the Group sslwood alias

  Let us know if it works.

• Question connection with Blast after upgrade to view 6.1.1 ("your office may have a security certificate not approved")

  Hello guys,.

  We are facing a very strange problem with Blast after the upgrade to view 6.1.1. Let me show you the scenario:

  We have two security servers (paired with two servers connection).

  On both servers security (and on the servers of connection), the default self-signed certificate is used.

  Secure Tunnel, PCoIP Secure Gateway and Secure Gateway Blast are activated.

  Users access it from internet via Netscaler which balance the traffic load and present a trusted signed certificate.

  For now I won't go in deeper into the Netscaler configuration, as it was working fine.

  We were on view Horizon 5.2 and everything worked fine! ...

  After the upgrade to view 6.1.1 we are unable to connect using the web browser! We can open a session and select the desktop, but as soon as the connection to the desktop is launched, we receive the following error message:

  "Your Office has been disconnected.

  Try to reconnect to the office...

  Your office can have an untrusted security certificate. Click here to accept the security certificate, then try to connect to your desktop again. »

  

  If we click on the link, we are redirected to something like https://Blast_External_URL:8443/r/F386565D-D068-4AC1-BFD3-3A903CBEB235/certAccept.html , receiving a blank page with the following text:

  "Could not resolve the route of proxy for the request.

  Just before the upgrade, we have been able to use the HTML Protocol! We have does no change at all, so I really think it's related to some changes introduced by the new version of Horizon view, but may not know what is causing the problem.

  No problem connecting with the customer to view Horizon (PCoIP and RDP).

  If in the external URL Blast Secure Gateway, we insert the hostname of the server security instead of the external URL (Netscaler), we are able to connect but of course only from our local network.

  Someone at - it ideas?

  Thank you.

  Hi Calyps0Craig,

  Yes, I found a solution for this. In our case the issue was resolved by changing the configuration of Netscaler.

  In the past, we use SSL offloading and worked all protocols. It seems that with the new version of view SSL offloading does more work.

  Change the Service and virtual server on ports 443 and 8443 for SSL to SSL_BRIDGE solved our problem.

  Hope this will help you.

  Best regards

  Claudio

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Internet connectivity with iOS 9.3 problems

  I have an iPhone handset 6

  Since the update the handset does not connect to the internet.

  Indeed, despite a complete network redefined and, when the connection through wifi to my router at home and tries to access the internet - no luck!

  IPhone 6 combined - still on the old version - disorder web access my wife.

  I can only put it down to the upgrade and the information circulating on the net about similar issues.

  The iTunes doesn't seem to recognize that there is a more recent patch for the 9.3 iOS version 13E233. Some sites there indicate iTunes should detect a fix updated since this original version. I saw the reference to 13E234.

  Help, please. Frustrating that *!

  iOS updates regularly change of variables operating system which, from time to time, will affect negatively other parameters and the features of the component on the device (including WiFi).  In addition, this can be a problem with your carrier and the specifics of your plan data or of the SIM card in your device settings that need to be addressed or refreshed.  To update the carrier settings, place a call to your carrier and place them on your device.

  This particular issue on the side of the Apple of street connectivity has been surfacing regarding the update and its been mainly a question of the environment such as WiFi access or your router (s) your help, I've had this as well and here are the most effective steps, I can give you to solve.

  WiFi/Internet environment

  1 restart your router

  2. check the latest version of the firmware on the router (router manufacturer and manual will have instructions on this one)

  Apple IDevice

  3. remove the WiFi access point of your iDevice which is the blue tick, if its power to establish at least a connection with your internet facing router it is a very practical and viable step to achieve. Settings > WiFi > * WiFi Access Point name * > forget this network (another option is to simply renew the lease, which will be used in blue at the bottom of this screen) my recommendation is to forget this network and let your iDevice and the router to build a new pile of access point.

  4. (optional if nothing above has solved the problem on this point) reset network setting on your iDevice, you will probably need to provide credentials for your router here.  Settings > general > reset > reset network settings > restart

  5. last resort to restore your device using iTunes, using iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

  It is a fairly complete set of instructions to identify it's a software or a configuration issue with your device.  If after that you had accomplished each of these steps, the problem is not resolved, move to consider a repair like the WiFi hardware physically in the device may be damaged.

  See you soon

• is "is there a connection with the server problem", in El Capitan

  Hi guys,.

  I've tried to sort myself but up to now no joy... :-(

  I'm under El Capitan on a MacBook and for weeks I need to install a specific program through CDROM connected with my old Mac Mini (Tiger) via my WiFi use it as a hard drive external.

  Everything worked fine, but then I get this annoying message "there was a problem connecting to the server...". »

  So far on:

  1. the service of Mac Mini is not listed in the connection points

  2. the Mac mini is no longer connected to my network

  It seems that this message has something to do with my iCloud service, I tried to unplug and deletion and fixed but as soon as I have reactivated iCloud began to burst once again.

  Any suggestion?

  Thank you

  Sebastiano

  Have you tried to remove the software that you have installed as instructed by the developer?

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• Problem connecting wireless with my Tecra A8

  Hello

  I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.
  I tried several ways to solve this problem.
  I updated for active connections, then I click on the Connect button after you select my wireless LAN, but it doesn't connect.
  Or I restart my computer, but it doesn't connect.
  However, it connects to the network wireless in anytime after about 15 minutes.

  Also when I tried to connect to the network wireless at home, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
  I wonder that there is no problem with installation? Or my wireless card doesn't work?
  Can someone help me?

  Thank you

  > Also when I tried to connect to a home wireless network, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.

  According to the statement, all looks like that you try to use a password for encryption wrong!

• Problem connecting Bluetooth with Windows Mobile Device Center

  Hello

  I have and HTC Snap with WM 6.1 I want to connect to my Satellite P500 running Windows 7 to be able to move the files by using Windows Mobile Device Center.

  I know that this device can talk to this laptop via bluetooth, because there are some utilities bluetooth Toshiba that I can use to get a connection.

  However, even if the Toshiba utility recognizes my bluetooth device, but WMDC is not. WMDC recognises my device when it is connected with a USB cable.

  I don't know about the drvupdate-amd64 download which I think is necessary with WMDC but when I run what it looks like all it does is try to install a device driver for a device that is 'unknown '. I get a message at the end that driver could not be installed.

  I have run out of ideas on how to get these things to work. Someone at - it a similar experience?

  Could this be a problem of COM port? My Bluetooth device to 40 com affected Toshiba stack I don't see a COM 40 in the WMDC, just a port identified as "Bluetooth" settings

  Post edited by: t5247rb

  Hello

  This page of Toshiba Bluetooth may be able to help you;
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Here are very interesting HowTo documents;
  In your case I recommend that you check the docs:

  + How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.

  and

  + How to connect PC to internet via Bluetooth using a Windows Mobile 6 phone +.

  Welcome them