Problem / connection with the client to view

Similar Questions

• white screen when connecting using the client to view

  Hello

  I have a situation on my hands if I try to connect to my office using the client to view I can connect but when I click to start all I get is a black sceren.  If I can access the external url of my security server, I can connect and my desktop appears.  If anyone has experienced this? any ideas would be greatly appreciated.

  You can connect from a WAN using PCoIP if you use a VPN. If you are

  using the server security, for now, you will need to use RDP.

  Ian

• Connection with the client VPN for RV110W problem

  Hi guys: I just installed a RV110W router to my small business and I try to connect via VPN from home client.  I was unable to do so, no matter what I try.  Relevant information:

  1. I can connect to the router via remote very well management, so I know that the router is accessible from the Net.

  2. internal address of the router: 10.81.208.1

  3. active PPTP.  PPTP server IP address: 10.0.0.1

  4 IP addresses for PPTP clients: 10.0.0.10 - 14

  5. two VPN clients added - one with PPTP, with the QuickVPN Protocol Protocol.  Both are enabled (and Yes, I triple checked passwords)

  6 encryption MPPE and Netbios active.

  7 IPSec, PPTP and L2TP all active gateways.

  8 VPN client: 1.4.1.2

  9. computer: laptop running Windows 7 family (64-bit), with the firewall Windows is activated.

  10 home network: 192.168.2.196

  It is causing to tear my hair out.  What Miss me?

  Shannon

  Hi Shannon,

  I am pleased to see that you're progress.

  Shannon Rotz wrote:
  I changed the RM port to 443.  Unfortunately, now I can't connect to the router via browser, either by remote management or from the local network - I get the usual "page cannot be displayed".  How do I get back into the router configuration GUI?
  

  You should be able to reach the GUI by typing https://192.168.1.1(assuming that you have not changed the default IP address) normally once you replace http (port 80) with https (port 443) the internal router web server automatically will redirect you to the https page if you type http. Open your command prompt and try to do a ping of the IP address of the router to ensure that it still meets this address

  With regards to the VPN client:   Up until I changed the port, the same error message kept coming up, i.e. "Unable to establish connection" (or something like that), with a list of possible reasons why it couldn't connect. Now the message has changed - I'm getting "Server's certificate doesn't exist on your local computer".  If I continue trying to connect, then it says "Activating Policy", followed by "Verifying Network", then "The remote gateway is not responding.  Do you want to wait?"  This is definitely progress, since I never got this far before.

  You are a quarter inch offline. If you look at the log.txt in C:\Program Cisco Small Business\QuickVPN Client, in my view, you will see "Failed to ping router remote VPN! This means that your PC is blocking the ping to the router response. Usually, if you look at this point the status of Client VPN in the router (first of all need to remote management) you will see that your user status is "connected." If the router thinks that the connection is established, but the PC does not work. You might want to try another PC at this stage to verify that it is indeed a problem with your PC. This problem is usually caused by the 3rd party software antivirus/firewall blocking the ping response. Microsoft Security Essentials can do this as well, so if you turn it off. If you do not have another PC to test from, call Cisco Small Business Support and ask a technician, try to connect to the lab. You can find the number to call here

  On an impulse, I tried setting up a Windows VPN connection, i.e. created a new VPN connection in Network and Sharing Center, using a PPTP client ID that I had created.  That connection actually worked, except for one problem:  I can't see the remote network.  If I could solve that problem, I'll just tell the other clients to use a Windows connection rather than QuickVPN.
  

  Good thought. If you do not see the remote devices, make sure that they do not block VPN connections. (Windows or third-party firewall, antivirus, antispyware) With a connection, PPTP or QuickVPN, you should be able to go to run, type the IP address of the device that you want to connect to (i.e. \\192.168.1.101 ) and see the list of shared folders. After the PPTP connection is established, try to ping the address LAN IP of the router. If it is successful, try to ping a LAN device such as a network printer or a PC. Again, PCs may block ping requests if they have a firewall running watch so for this.

  Answer please if you have any questions.

• create the connection with the client of sqlplus

  Hi@everybody,

  I have a little problem with the oracle Instant Client connection I installed on my Windows 7 64 bit. First of all, I have chips files:

  instantclient-basic - windows.x 64 - 12.1.0.1.0.zip

  instantclient-sqlplus - windows.x 64 - 12.1.0.1.0.zip

  and uzipped together in a directory. This directory is in the PATH in Windows 7 environment variable.

  Now I want to try to get a connection to my Oracle 11 GR 2 (11.2.0.3) database on CentOS. When I do an EasyConnect connection:

  QUICK > sqlplus system / pwdofsystem@hostname_of_db_server:1521 / NOM_SID

  There is no problem to get the database.

  But when I try along the way:

  QUICK > sqlplus "system @(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=hostname_of_db_server) (PORT = 1521)) (CONNECT_DATA = (SID = SIDNAME)))".

  First, he asks me the password for the system. I enter the password and then I get an ORA-12560 error.

  I already read about that mistake, but I can not understand, why I need an entry in tnsnames.ora file when I gave sqlplus all parameters directly. Or is there another failure?

  Thank you and best regards,

  David

  TAKE OFF THE UNIQUE CITY, you will be connected

  Run this without single quotes.

  PROMPT > sqlplus system @(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=hostname_of_db_server) (PORT = 1521)) (CONNECT_DATA = (SID = SIDNAME)))

  I guess if you spend the whole ting quotes, sqlplus is consider as a single 1 setting and assuming that the whole thing as username.

• Unable to connect with the customer to view

  Hello

  I can connect to my first machine winXP with rdp, but the customer view told me that there is a connection error (error http, status = 400). In the "server connection", I used my ESX host's IP address.

  What does poorly or describing what it takes to make this work?

  Thank you very much

  Malta

  Sorry, just to clarify, the connection to the server is a Windows Server (may be virtual) who has the login server software installed. It's in its web interface that you configure all the settings for your desktops, your pools of desktop computers and users or groups have the right to use them. Although view uses rdp to connect protocol client to view isn't just a remote desktop client.

  You also need the view-agent installed in the virtual desktop machine, you want to connect.

  Once you point the client to connect to the server, it displays all the virtual desktop that took the user with that right you authenticated. The administrator is not automatically or the right to use any desktop PC, you must manually set the rights.

• See 4 and VM Windows 7 x 64: impossible to connect with the customer to view

  I have Win7 x 64 VM.

  There was a lot of questions during the installation of the Agent from the view.

  Now, I can not connect to it with View Client. PCoIP shows me black screen, RDP-connect "all sources of funds are occupied."

  
  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

  Anton,

  Desktop 64-bit are not supported for view 4.0. Please see http://www.vmware.com/pdf/view40_admin_guide.pdf for the full list of desktop operating systems.

  Mike

  (Apologies for the exact same about three threads)

• Connection with the Apple ID server problem

  iCloud on my ASUS ZENBOOK can not connect.  It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.

  My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.

  Key points:

  (1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10.  (Confirms that it is not a problem of "User" with me trying to use the wrong password).

  (2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.

  (3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia).  [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].

  (4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.

  (5) I uninstalled iCloudand reinstalled from a new download.  Did not help.

  (6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers.  I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.

  Suggestions as to best 'next steps', I can take would be highly appreciated...

  I have exactly the same problem... is there any help for us?

  So far, I've been forced to use Windows 7

• Unable to connect with the listening port of the client

  [oracle@rac31 ~] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on March 21, 2014 03:33:30

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date March 20, 2014 13:33:30

  Uptime 0 days 13 hours 59 minutes 59 seconds

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/rac31/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.101) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.111) (PORT = 1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM1' READY State, has 1 operation for this service...

  'Cars' service has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  Service 'racXDB' has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  The command completed successfully

  In my server in the Oracle_HOME/network/admin

  This is my entry in tnsnames.ora

  RAC =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac)

  )

  )

  I am able to connect with the command

  sqlplus system/password@rac

  However, when I give the same input on the client computer

  It does not work

  I am able to ping the host rac-scan successfully

  C:\Users\rgehi > ping rac-scan

  Ping rac - scan.oracle.com [192.168.1.113] with 32 bytes of data:

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Ping statistics for 192.168.1.113:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Users\rgehi > sqlplus system/password@rac

  SQL * more: Production of the version 12.1.0.1.0 Fri Mar 21 03:40:53 2014

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  I installed oracle client on my desktop

  and I made entries in the tnsnames file

  However when I connect to the database to rac with scan it works sometimes...

  not always...

  so I'm in search mode and finally, after many moons a lot and light years away, I found the following

  Here's what I did

  # - scan

  192.168.0.127 rac31 - scan.oracle.com rac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  I put three ip addresses in the host with the same name rac31-scan file

  then I put the same ip addresses in my windows hosts file

  Here are the entries

  192.168.0.127 rac31 - scan.oracle.comrac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  but in the (windows 7 pc) client tnsnames file has just one entry

  It's here

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac31-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = RAC)

  )

  )

  and now when I connect from the client... it connects without any problems.

  I have tried more than 10 attempts without problem

  BINGO!

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• vSphere Client could not connect with the server

  Hello

  I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.

  He keeps fails with the following error message:

  VSphere client could not connect with the server {ip address}

  Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)

  I can ping the server successfully.

  Has anyone seen this problem before?

  Thank you

  for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?

• is "is there a connection with the server problem", in El Capitan

  Hi guys,.

  I've tried to sort myself but up to now no joy... :-(

  I'm under El Capitan on a MacBook and for weeks I need to install a specific program through CDROM connected with my old Mac Mini (Tiger) via my WiFi use it as a hard drive external.

  Everything worked fine, but then I get this annoying message "there was a problem connecting to the server...". »

  So far on:

  1. the service of Mac Mini is not listed in the connection points

  2. the Mac mini is no longer connected to my network

  It seems that this message has something to do with my iCloud service, I tried to unplug and deletion and fixed but as soon as I have reactivated iCloud began to burst once again.

  Any suggestion?

  Thank you

  Sebastiano

  Have you tried to remove the software that you have installed as instructed by the developer?

• Problem connecting to the server by using the url with the logical name!

  Hi all!

  I looked for information on this subject, but have not seem to found a solution.

  I'm developing a Smartphone application that needs to connect to a server to retrieve data. Then I use a direct connection with the correct settings (I hope):

  URL = "url of the server" + "deviceside:true" + "AFN:...» »

  The problem is that the connection should be done without Hardcoding the "apn". These are the tests I've done so far (assuming I'm always add the ' deviceside: true ' parameter):

  URL (logical name) + AFN OK!
  FAILURE of the URL (logical name)
  URL (static IP) OK!

  * by logical name, I mean a url as www.google.com

  What I need is to use the logical name, without the parameter apn!  Maybe I'm missing another parameter that I don't know?

  Some additional info that might be useful! :

  -The server is a server of Vodafone, which, as has been explained to me, should be on the list of white of the RIM (not sure what that means, but I guess it has to do with the fact that BB connection through the RIM at one point servers, and be in this list gives a sort of 'privilege' when you browse servers of RIM) , and I don't know it is publicly accessible as (see following)

  -An android version of the application works fine without Hardcoding the AFN and using the logical name (I guess it has to do with the RIM servers!)

  Any help or ideas towards the solution that it is greatly appreciated!  If I'm missing some info that you think I should add! Please tell me!

  Thanks for your help!

  Juan

  Thanks Peter!

  I could solve it by looking at the code of the alternative of the Api network in the link sent you me!

  The solution was the addition of the ConnectionUID parameter to the url String!  as to why this solves the problem I still don't understand it! (If you can enlighten me with the reason, I would be very grateful)

  This value is found in the service books!, I have the zip code just in case it helps someone!

  Hogshead string = null;

  Full book sb = ServiceBook.getSB ();

  Reviews [] ServiceRecord = sb.getRecords ();

  for (int i = 0; i)< records.length;="">

  {

  String cid = records [i] .getCid () .toLowerCase ();

  String uid = records [i] .getUid () .toLowerCase ();

  If ((cid.indexOf ("wptcp")! = - 1) & (uid.indexOf ("wifi") ==-1) & (uid.indexOf ("mms") ==-1))

  {

  Hogshead = records [i] .getUid ();

  }

  }

  then add the parameter: ConnectionUID = Hogshead

  Once again, thank you!

• Failed to save the system or create the image of the system, error: the problem occurred while trying to connect with the VSS writers (0 x 80042318).

  Original title: cannot backup Windows 7 system.

  When I try to back up the system or create the image of the system I get the following message, the error was detected in the Volumn Service VSS (Shadow Copy) the problem occurred while trying to connect with the VSS writers.  Verify that the event system Service and the VSS service are running and look for errors related to event logs. (0 x 80042318).

  Hi bernardolahoustino,

  Please keep us informed. Please let us know the State of the question, so that we can help you further.

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian