problem detected

Similar Questions

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• Satellite M200 - problem detection USB connect after waking from sleep mode

  Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.

  > fully up-to-date with all the drivers and everything else
  The latest version of the BIOS too?

• Sophos: Problems detected

  Hi guys,.

  I recently conducted a scan of my MacBook Air using Sophos anti-virus and the underside of problems have been identified:

  New volume detected to.

  2016-01-03 18:23:39 + 0000 file corrupt: /private/var/folders/f7/pmtj4c3d2bgdr714z5xhmz7m0000gn/C/com.apple.appstore/101 8109117/ftk3252456602304584541.pkg

  2016-01-03 18:23:48 + 0000 corrupted file: /private/var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068/C/com.apple.SoftwareUpda you / CFNetworkDownload_qJXc74.tmp

  Please can someone advise me if these questions are harmful or not, and how to remove them from my camera.

  Thank you

  Dan

  Dan78910 wrote:

  Hi guys,.

  I recently conducted a scan of my MacBook Air using Sophos anti-virus and the questions below have been identified

  Sophos is the problem. Uninstall the application.

• Problem detected by MS Fixit 50378

  Today, I read about MS Fixit solution would be to analyze your system for malware can affect your system. During the execution of this solution, she came back with the message "there is a problem with this windows package install." A script required for this installation could not be executed. Contact your supplier of staff or the package of support ". When you click OK it then tells you that your computer may have a known issue with the Microsoft MS10-015 Security Bulletin. I ran MSE 1.0.1611.1 with the latest updates and it does not detect. I ran the software Windows malicious removal tools v 3.4 and he found nothing and I ran malware bytes and it found nothing. Is there a way that it prevents the thing Fixit solution of race and whether I have malware on my system which is not detected? I am running Windows XP SP3. Thank you

  The error you received indicated that there is a problem with a security patch that was installed on your PC via Windows update. This does not mean that your PC is insecure, just that this patch is in question. It is not a problem MSE or infection.
  -steve ~ Microsoft MVP Windows Live ~ Windows Live OneCare | Live Mesh | MS Security Essentials Forums moderator ~.

• Blue screen with problem detected - stop 0 x 24

  Running XP Pro, a blue screen came up with the following: a problem has been detected and windows has shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run chkdsk /f to check for hard drive corruption, and then restart your computer. Technical information: * Stop: 0 x 000000024 (0 x 00190203, 0x82f27008, 0xc0000102, 0x00000000).
  Someone has seen this before and can it be resolved? It won't let me run chkdsk or anything. Help, please!

  This error indicates a problem with your filesystem (NTFS).

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, power buttons, remove the battery, etc.). ?

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  .. .and if you do no XP bootable media (or aren't sure you have), here are some additional instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• X 200 wireless problem - detects available networks, but cannot connect to them.

  Hi all

  I have a weird and annoying problem. My X 200 can detect wireless networks but refuses to connecto to them.

  It's a brand new computer that I just received.

  Some info:

  ThinkPad X 200 7454-2HU, running Vista x 64.

  Downloaded latest drivers installed, all using the autopilot to Lenovo download application.

  The driver has detected in the Device Manager is: Intel Wifi Link 5100 AGN.

  There is no problem with the wireless network (the other computers connect to it without any problems).

  I tried to cancel the option "n", leaving a "b/g", but it did not help.

  It is problematic that only one device in Device Manager, and it's "Controller of Bus SM" (cannot understand what it is and update windows or Lenovo update does not solve this problem).

  When I use "Intel ProSet/Wireless Tools" diagnose, I get:

  Test equipment: managed (wireless hardware is enabled)

  Pilotass. Driver is loaded. NET w5v64 Versio: 12.0.0.82

  Radio test: past. The radio is on.

  Scan Testass. There are 12 networks available to connect.

  Association test: failed. No partner.

  When I look at the statistics, it seems that the card receives bytes (nothing is sent).

  What do you think? Is it a hardware problem or software?

  No idea what can be done if it is a software problem?

  S.

  
  

• Problem status Microsoft 6to4 has a driver problem detected other Solutions to adapt Hardware Exchange may not detected

  Map Microsoft 6to4 has a driver problem	Detected		Other Solutions
  Hardware changes may not have been detected

  Hi M. - Tottimeemoo.

  According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you to see link below and check if it helps.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520
   
  Method 2: I also suggest you to uninstall and reinstall the network card and check if that helps.
  http://TechNet.Microsoft.com/en-us/library/cc753699 (v = WS.10) .aspx
   

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• My computer has problems detecting the USB cords.

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

  Try to buy a USB hub powered (one that plugs into your computer for its USB connection and which has also the power to the USB ports to plug into the extra wall) and see if that helps.  Some computers provide the power to the USB ports and this can cause problems with the devices.

  "Thane Marshall" wrote in the new message: * e-mail address is removed from the privacy... *

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

• BlackBerry smartphones 'browser problem detected.

  I get a message 'Browser issue detected' when I go to expedia.com.  He wants me to activate scripting/javascript.  So I click on the message and it gives me options to choose the right browser: explorer, firefox, safari, etc..  Is the problem with this particular Web site?  I thought that javascript is activated automatically on the BlackBerry...  Don't know what to do here.

  Well, the activation of JavaScript on your BB allows the BB browser to interpret and make sites that use it. If it is disabled, then those who can't run and what's planned rendering of the site will come through.

  Regarding the "is it advisable"... This is an appeal from the judgment that each individual must make. Personally, I see no harm in them for BB devices. Other OS HH could have more challenges there.

  See you soon!

• My pc has detected the error: hardware changes would have no problem detected.

  Original title: my pc encountered chnges hardware could not be detected problem, when I visited my troubleshooting... im running windows7 family Basic... What am I going to do to solve this problem.

  my pc hardware met chnges could not be detected the problem when I visited my troubleshooting... im running windows7 basic family... what will I do to solve this problem, id already run microsoft fix in my pc but nothing is changed, I went to to see Device Manager if there is a problem, but I see no problem in Device Manager What does this problem mean? Please help me, your answer will be...

  Hi Javedpasha,

  1. when exactly you receive this message? Are you facing problems using USB devices?

  2. what Fixit did you run?

  3. What is the brand and model of your computer?

  4. What is the full error message that you receive?

  5. have you made a recent software or hardware changes to the system?

  This error occurs generally when the audio / sound does not work.

  Method 1:

  You can check the manufacturer's Web site and try to install the latest version of the drivers for the chipset, sound, network card and the display.

  For more information, see the article:

  Updated a hardware driver that is not working properly

  Method 2:

  You can also try to run the hardware and devices Troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  Disconnect external devices attached to the computer (except the keyboard and mouse) and check if it helps.

• Slow computer. At each "troubleshooting." Nothing works, not 'problems' detected.

  My computer is slow, and none of the troubleshooting suggestions seem to help. I disabled all startup programs unnecessary, Defrag, my 'score' is a Norton 4.2 is no problem.  I have 6 GB of available ram 5.75. Yet when I operate, say, media library, it works very well for a few minutes and then slowing to the degree that if I can manage to drag the mouse to close the program, it takes several minutes to do.

  Help!

  Hello
  • What version of Windows are you using?
  • What were the changes made before the show?
  • How long have you been faced with this problem?
  You can view these methods:
   
  Method 1:
  Try the SFC scan on the computer.
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
  Reference:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Reading CD/DVD and written Publisher details that problems detected by car is not able to burn (TSSTcorp CDDVDW SH-S202J) he can read, but he can't write DVDs/CDs

  ,
  My name is shabani, I have a CD/DVD writer is to say Samsung (TSSTcorp CDDVDW SH - S202J) it can play DVDs/CDs but stops when burned in any burning software. The drivers are 'ok' and is there something that can be done?

  Hello SanjuSS,

  If this still happens after two distinct formats, then you may very well be hardware problems here.

  When burn us a CD/DVD, we use a separate component that reads.

  There are diagnoses of material that accompanies this disc and can we run them.

  It would be wise to contact the manufacturer at this time.

  Best regards

  Matthew_Ha

• problem detected with the adoptive parent wireless802.11 b/g 2 (code 43)?

  my printer does not work on any usb port.  Will work sometimes if I restart the computer, or stop and restart printer.

  Hello

  Error code 43 indicates that one of the motors controlling the unit notified the operating system that the device failed in some way.

  Method 1:

  You try to run the troubleshooter of equipment to diagnose the problem better.

  See the link below:

  Convenience hardware store

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Download and install the latest drivers from the computer's wireless network card or the manufacturer of the device and check.

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.